ARDUINO SHD MOT - Arduino Shield - Engine control, L298
40.91 EUR
Detailed sheet with complete information, compare prices and find the features for PRODUCTNAME, at the price of PRICE CURRENCY; classified in the category CATEGORY NAME; this product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
The Arduino™ motor shield is based on the L298, enabling the user to control inductive loads such as relays, solenoids, DC motors and stepper motors.
You can use the Arduino™ shield to control 2 DC motors or 1 stepper motor independently of each other. You can also measure each motor's power consumption and perform many other functions.
Technical data
EAN: 9783645651899
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
The Arduino™ motor shield is based on the L298, enabling the user to control inductive loads such as relays, solenoids, DC motors and stepper motors.
You can use the Arduino™ shield to control 2 DC motors or 1 stepper motor independently of each other. You can also measure each motor's power consumption and perform many other functions.
Technical data
- Operating voltage: 5 - 12 V
- Motor control: L298P, controls 2 DC motors or 1 stepper motor
- Power: 2 A per channel or max. 4 A (with external power supply)
- Current detection: 1.65 V/A
- Free-running stop and brake function
EAN: 9783645651899
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
ARD MKR SHD GPS - Arduino Shield- positioning MKR, GPS, GLONASS, Galileo
57.44 EUR
"This shield complements your Arduino MKR by supporting the following GNSS (Global Navigation Satellite System) and thus worldwide satellite-based positioning:•GPS •GLONASS • Galileo
Examples of use
- For monitoring fleets or swarms
- scientific experiments at high altitude
- general localisation
The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is designed for use on MKR format boards, but thanks to its Eslov connector it can also be connected with a cable to any board with such a connector.
Technical data
- GNSS receiver: SAM-M8Q
- Connections: MKR, Eslov
- Battery: CR1216 (not included)
- Communication: Serial / I2C / DCC
ARD SHD ASX00021 - Arduino Pro Shield - Portenta Vision with LAN
57.03 EUR
Portenta Vision Shield: a production-ready solution for embedded ML applications in combination with the Arduino Portenta H7 boardThe Vision Shield is supplied with a 324 x 324 pixel camera module containing an ultra low power image sensor designed for always-on vision devices and applications. The highly sensitive image sensors can capture gestures, ambient light, proximity detection and object identification.
• professional image processing
• directed audio detection
• Ethernet or LoRa (depending on shield)
• JTAG
• for Arduino Portenta
Arduino has teamed up with OpenMV to offer a free license for the OpenMV IDE, which allows an easy entry into image processing with MicroPython. With OpenMV, all professionals, researchers and developers can develop cost-effective Python-based camera vision and audio applications. With the two digital microphones integrated in all directions you can record sounds to the videos, which can be stored on a MicroSD card.
Transfer data either via Ethernet or LoRa®.ARD SHD ASX00021 (Shield with LAN)
ARD SHD ASX00026 (Shield with LoRa)
Technical data• Camera: Himax HM-01B0 Camera module
• resolution: 320 x 320 active pixel resolution with support for QVGA
• Image sensor: Highly sensitive 3.6-µ-BrightSenseTM pixel technology
• Microphones: 2x MP34DT06JTR
• Connection: LAN
• Interface: JTAG
• Dimensions (LxW): 66 x 25 mm
Scope of delivery
Portenta Shield with LAN function
external links
https://openmv.io/pages/download
https://www.arduino.cc/pro/tutorials/portenta-h7/por-openmv-bt
ARD MKR SHD RGB - Arduino Shield - RGB Matrix, 84 LEDs, AP102
68.45 EUR
"Extend your MKR board with a one LED matrix with 84 densely arranged RGB LEDs. No adapters and no soldering necessary, you can start right away!Libraries and instructions and examples can be found at
https://www.arduino.cc/en/guide/MKRRGBShield
Technical data
- 84 x APA102 RGB LEDs
- Input voltage: 5 V
- Operating voltage: 3.3 V
- maximum current: 2.5 A
- Interface: SPI
- Dimensions: 61,5 x 27 mm
IDUINO ARD SHD JOYSTICK - Arduino Shield - Joystick Extension v1.0
13.41 EUR
Joystick extension v1.0This joystick/gamepad shield is based on Nokia 5110 LCD\RF24L01 interface. You can easily develop joystick games and communicate wirelessly. The shield turns your Arduino into a simple controller with 7 buttons ( (4 x big buttons, 2 x small buttons + joystick select button ) and a two-axis thumb joystick.
Specifications• nRF24L01 RF interface
• Nokia 5110 LCD interface
• Bluetooth interface
• I2C interface
• PS2 joystick
• Operating voltage: 3,3V or 5V e.g. STM32
• X,Y-axis with push button
• 6-button operation
• dimensions (L x W x H): 87 × 54 × 18 mm
SEEED ARD SHD SOLAR V2 - Arduino Shield - Solar charger v2.2, ETA1036 / CN3065
26.18 EUR
DescriptionThe solar charger is a stackable shield to Arduino compatible platforms, enables adaptive battery power and act as energy harvester for in-field charging. You may use various batteries that has the voltage of 3.0V-4.2V to shift up for 5V output, or put on Li-ion battery and solar panel to form an autonomous sensor unit. The maximum current provided by the board can get up to 600mA. An usb connector is also useful to charge the battery.
Features
• Output Disconnect
• Short circuit protection
• 3W Output Power when connecting battery
• Continuous Charge Current Up to 900mA
• Battery status indication ( Red : Charging , Green: Charged )
• Micro-USB Connector
Specification
• Battery input voltage: 3.0~4.5V
• USB input voltage: 4.75~5.25V
• Solar input voltage: 4.8~6V
• Maximum Output Power(with battery): 3W(600mA@5V)
• Ripple voltage:<100mV @ 500mA
• Dimensions: 68*53mm
IDUINO ARD SHD SCREW V3 - Arduino Shield - Screw-Shield V3
15.11 EUR
Screw-Shield V3This terminal expansion board can be screwed directly onto the terminal thread, reliable and convenient. It uses raised pins for easy connection of digital or analog sensors.
Features
• easy to use with Arduino UNO
• direct connection to the screw shield
• with contact pins for convenient connection of external digital or analog sensors
SEEED ARD SHD MUSIC V2 - Arduino Shield - Music V2.0, VS1053B
36.2 EUR
DescriptionTime to build your real-time MIDI instrument/music player! The Music Shield is an audio encoder/decoder compatible with Arduino, Seeeduino, Seeeduino Mega and Arduino Mega. It is based on the VS1053B chip, which enabled it to play sound files from SD card and do short-time recording as well. You can also use it to play MIDI notes by slightly changing its hardware installations. Due to the SPI communication mode, it keeps a minimum number of IO port that facilitates users's own developments of this device. Additionally, the new multifunction button provides greater convenience for users to control.
Features
• Compatible with Arduino,Seeeduino, Arduino Mega, and Seeeduino Mega
• New multifunction button
• Supported music format: MP3,WMA,WAV,AAC,MIDI,Ogg Vorbis
• Supports Micro SD card
• 3.5mm headphone jack
• MIDI interface breakout
• High quality playback
• Low MIDI Latency
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
ARD SHD ASX00026 - Arduino Pro Shield - Portenta Vision with LoRa
77.96 EUR
Portenta Vision Shield: a production-ready solution for embedded ML applications in combination with the Arduino Portenta H7 boardThe Vision Shield is supplied with a 324 x 324 pixel camera module containing an ultra low power image sensor designed for always-on vision devices and applications. The highly sensitive image sensors can capture gestures, ambient light, proximity detection and object identification.
• professional image processing
• directed audio detection
• Ethernet or LoRa (depending on shield)
• JTAG
• for Arduino Portenta
Arduino has teamed up with OpenMV to offer a free license for the OpenMV IDE, which allows an easy entry into image processing with MicroPython. With OpenMV, all professionals, researchers and developers can develop cost-effective Python-based camera vision and audio applications. With the two digital microphones integrated in all directions you can record sounds to the videos, which can be stored on a MicroSD card.
Transfer data either via Ethernet or LoRa®.ARD SHD ASX00021 (Shield with LAN)
ARD SHD ASX00026 (Shield with LoRa)
Technical data• Camera: Himax HM-01B0 Camera module
• resolution: 320 x 320 active pixel resolution with support for QVGA
• Image sensor: Highly sensitive 3.6-µ-BrightSenseTM pixel technology
• Microphones: 2x MP34DT06JTR
• Connection: LoRa
• Interface: JTAG
• Dimensions (LxW): 66 x 25 mm
Scope of delivery
Portenta Shield with LoRa function
external links
https://openmv.io/pages/download
https://www.arduino.cc/pro/tutorials/portenta-h7/por-openmv-bt
SEEED ARD SHD PROTOKIT - Arduino Shield - Protoshield Kit
18.21 EUR
"DescriptionBuild your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1"" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom shield.
Features
• Standard Arduino compatible
• Large 0.1""*0.1"" pitch prototyping area
• A variety of through-hole sizes to fit most parts
• Arduino UART and I2C port pin breakout for easy external communications
• Dual ISP breakouts for easy programming and stacking
• 3.3 volt, 5 volt, and ground power rails are easily available anywhere on the board
• Breadboard style prototyping area
• USB type B breakout
• Basic components included (buttons, switches, LEDs, resistors, USB jack)
Packing List
• 1x Arduino compatible Proto Board
• 1x B type USB connector
• 1x 40-pin 2.54mm male long header
• 1x 40-pin 2.54mm female header
• 2x 40-pin 2.54mm male header
• 1x 40-pin 2.54mm spacer
• 3x 8-pin 2.54mm female header
• 1x 6-pin 2.54mm female header
• 1x ISP female pin header
• 1x ISP male pin header
• 1x 10k Ohm rotary potentiometer
• 4x 1k Ohm through-hole resistor
• 2x 10k Ohm through-hole resistor
• 2x 3mm Red through-hole LED
• 2x 3mm Green through-hole LED
• 1x 3mm dual color through-hole LED
• 4x Mini push button switch
• 2x DPDT switch
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product."
IDUINO ARD SHD XBEE - Arduino Shield - Xbee Bottom Board
11.45 EUR
XBEE conversion boardThis Arduino XBEE conversion board allows you to quickly and easily interface a Bluetooth XBEE module on a breadboard, without the need for jumper cables or soldering.
This board converts all 20 XBEE pins to double row pins with 0.25 cm standard spacing. The corresponding pins are clearly labeled for easy identification.
ARD SHD P UNO3 - Arduino Shield - Proto Shield R3
24.21 EUR
"The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder.- Arduino UNO Pinout
- Larger area for THT components
- 24-pin SMD area
- Dimensions (LxW): 101.5 x 53.3 mm
ARD SHD P MEGAR3 - Arduino Shield - Proto Shield R3
15.48 EUR
The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder.Dimensions (LxW): 101.5 x 53.3 mm
FREI ARD SHD USB ADK1 - Arduino Shield - USB host compatible with Google Android ADK
20.7 EUR
USB host compatible with Google Android ADKFunctionality of a USB host, communicates with USB devices and serves as a USB hub.
Specifications• supports Google Android ADK, Android phones G1, Nexus One, Nexus S, Motorola Droid (Requirement: Smartphone Android 2.3.4 / Tablet Android 3.1)
• provide compiled APK installation packages and ADK source files
• compatible with Arduino UNO 328 / Arduino Diecimila / Duemilanove 328 / Arduino Mega 2560(recommended)/ Arduino Mega 1280
SEEED ARD SHD RS232 - Arduino Shield - RS232, MAX232
21.11 EUR
DescriptionRS232 Shield is a standard communication port for industry equipment.This module is base on MAX232,which is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V supply. The shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface. Also the RS232 headers will facilitate your connections and commissioning. It provides the welding areas to make full use of extra space on it, which is highly convenient for prototyping.
Specification
• Meets or Exceeds TIA/EIA-232-F and ITU
• Operates Up To 120 kbit/s
• Low Supply Current
• LED Indicator
• DB9 Connectors(female)
• Welding Areas
ARD SHD ASX00027 - Arduino Pro Shield - Portenta LPWAN Cat. M1/NB IoT GNSS
99.67 EUR
The Portenta Cat. M1/NB IoT GNSS Shield brings cellular communication and positioning to the Portenta H7 boards. The Shield uses a Cinterion TX62 radio module designed for high-efficiency, low-power IoT applications and optimized bandwidth and performance.
The Shield enables the development of asset tracking and remote monitoring applications (agriculture, smart cities, utilities) combined with the powerful computing power of Portenta H7. This is a Works with Arduino product, developed by Arduino and Thales.
• add NB-IoT, CAT.M1 and positioning to Portenta.
• change connectivity capabilities without changing the board.
• reduce communication bandwidth requirements in IoT applications
• low power module
• implement a small multiprotocol gateway (H7 WiFi - BT + NB-IoT/CAT.M1)
• compatible with MKR boards and Portenta H7
Technical data
• Cinterion TX62 radio module (see data sheet)
• NB-IoT - LTE CAT.M1
• 3GPP Rel.14 compliant protocol LTE Cat. M1/NB1/NB2
• UMTS BANDS: 1 - 5 / 8 / 12 (17) / 13 / 18 - 20 / 25 - 28 / 66 / 71 / 85
• LTE Cat.M1 DL: max. 300 kbps, UL: max. 1.1 Mbps
• LTE Cat.NB1 DL: max. 27 kbps, UL: max. 63 kbit/s
• LTE Cat.NB2 DL: max. 124 kbps, UL: max. 158 kbps
• point-to-point mobile terminated (MT) and mobile originated (MO) text mode
• Protocol Data Unit (PDU) mode
• GNSS capability (GPS/BeiDou/Galileo/GLONASS)
• Embedded IPv4 and IPv6 TCP/IP stack access
• Internet services: TCP server/client, UDP client, DNS, Ping, HTTP client, FTP client, MQTT client Secure connection with TLS/DTLS Secure Boot
Possible application areas
• Remote monitoring
• industry and agriculture
• public utilities
• asset tracking
• daily life
• fleet management of industrial vehicles
JOY-IT ARD SHD RS232-2 - Arduino Shield - RS232
22.3 EUR
RS232 port expansion card for ArduinoThis expansion card is used to add an additional RS232 interface to an Arduino.
The RS232 port can then be addressed via the UART interface of the Arduino.
Specifications
• Signal: UART to RS232
• Ports: 2x D0 - D7
• Pin header looped through
• reset button
• incl. 2 jumpers
ARDUINO SHD SENS - Arduino Shield - Axes Sensor, 9-Axes, BN0055
47.42 EUR
Arduino™ 9 Axes Motion ShieldThe Arduino™ 9 Axes Motion Shield has been developed with Bosch using their BN0055 absolute orientation sensor as an on-board key feature. With the shield, designers can start to introduce motion sensing to projects, connecting to TinkerKit modules and Arduino™ boards such as Uno, Yun, Leonardo, Ethernet, Mega, Due and Zero Pro.
The shield is powered only when connected to an Arduino™ board.
Features
• BN0055 absolute orientation sensor
• 5 V operating voltage
• 50 mW power consumption
WAVESHARE RPI SHD PAN-TILT - Raspberry Pi Shield - kit with pan/tilt function
30.11 EUR
This is a 2-DOF pan-tilt kit designed for the Raspberry Pi. With the integrated PCA9685 PWM chip and the TSL2581 ambient light sensor, the Pi can control the camera movement and measure the light intensity via the I2C interface.• compatible with all popular Raspberry Pis
• I2C interface - only 2 pins are needed for motion and light intensity measurement
• onBoard PCA9685 chip - provides 12-bit PWM signal with resolution for motion control
• the built-in TSL2581FN light-to-digital converter with embedded ADC provides a value corresponding to human eye sensation
• special acrylic glass for mounting the Raspberry Pi camera
Specifications
• PWM driver: PCA9685
• PWM resolution: 12-bit
• ambient light sensor: TSL2581FNN
• Ambient light resolution: 16-bit
• Communication interface: I2C
• Operating voltage: 3.3 /5 V
• dimensions: 56.6 x 65 mm
Scope of delivery
1x pan/tilt HOOD
1x 2-DOF pan/tilt kit
1x SG90 servo
1x MG90S servo
1x acrylic plate
1x M2 screw package
1x RPi screw package
Documentation and downloads can be found here:
https://www.waveshare.com/wiki/Pan-Tilt_HAT
ARD SHD 4 RELAIS - Arduino Shield - Relay 4, 30.22.7.005.0010
39.72 EUR
The Arduino 4 Relays Shield allows your Arduino to run under high loads.Maximum current of single-pole switch contact: 30 VDC, 2 A
Maximum load voltage: 48 V
Maximum switching capacity: 60 W
ARDUINO SHD ETH2 - Arduino Shield - Ethernet Shield 2, without PoE, W5500
37.34 EUR
Arduino™ Ethernet Shield 2 without PoEThe Arduino™ Ethernet Shield 2 allows an Arduino™ board to connect to the Internet as well as read and write on a microSD card.
The shield is simply mounted on an Arduino™ board, for example on the Arduino™ Uno or since this version also on the Arduino™ Mega. Other shields can be stacked right on top of the Ethernet shield, allowing for optimum functionality integration in designs.
Connect the shield to your computer or a network hub/router via a standard Ethernet cable.
Features:
• W5500 Ethernet chip
• Slot for microSD card/card reader
• Reset controller
• RJ45 Ethernet jack
• 5 status LEDs
• Dimensions: 6.86 x 5.33 cm
JOY-IT ARD SHD CNC KIT - Arduino Shield - CNC controller board, A4988
25.35 EUR
"Controller board CNC 4x A4988 Motordriver for Arduino Uno.- detachable A4988 Motordriver
- compatible to GRBL 0.8
- control of up to 4 axes
- reset-button
- screw-terminals for power supply
- input voltage: 12 - 36 V
- dimensions: 53 x 68 x 18 mm
JOY-IT ARD SHD CNC KIT2 - Arduino Shield - CNC Controller board
26.33 EUR
Arduino CNC controller 4-axis CNC control cardThe ARD-CNC-Kit2 is a specially developed expansion board that enables CNC machines to be controlled via an Arduino board. This kit stands out for its compatibility with GRBL v0.9, a popular open-source software package developed for CNC applications. Thanks to its support for GRBL v0.9, the ARD-CNC-Kit2 can utilise advanced features such as PWM (Pulse Width Modulation) for controlling spindle speed and the implementation of soft limits, which serve to keep the machine within safe operating limits. These functions are particularly important for users who require precise and safe machine control. The kit allows for the simultaneous control of up to four stepper motors, with each motor controlled by a DRV8825 motor driver.
These drivers are renowned for their efficiency and reliability and are supplied with heat sinks that ensure optimal heat dissipation. This minimises the risk of overheating and the resulting damage or loss of performance.
FREI "ARD SHD LCD3,5 - Arduino Shield - Display 3.5"", 320 x 480, ILI9486"
31.24 EUR
"This shield can be used to add a 3.5"" (8.9 cm) display to an Arduino Uno, Mega or Leonardo.Features
• 320 x 480 resolution
• 8-bit parallel interface
• SPI interface for SD slot
• LCD controller: ILI9486 / R61581
• without touch function
• display with LED backlight
• compatible with: Arduino Uno, Arduino Leonardo, Arduino Mega
external links
lcdwiki.com/3.5inch_Arduino_Display-UNO
optional driver: https://github.com/prenticedavid
Note: Driver may vary - ILI9486 / R61581"
ARD SHD MKR2UNO - Arduino shield - MKR2UNO adapter
27.83 EUR
"With the MKR2UNO adapter, you can convert your Arduino UNO form factor-based project into an MKR-based project without much effort! Technical data
- Operating voltage: 3.3 V
- Input voltage: 7 - 12 V
- DC current for 3.3 V Pin: 700 mA
- DC Strin for 5 V Pub: 700 mA
Dimensions (LxW): 68.6 x 53.4 mm
NotePlease remember that the MKR2UNO is only a form factor adapter and therefore there is NO voltage translation. Be careful before connecting a shield, as a shield without IOREF level shifting capability may not work properly."
ARD SHD P MKR - Arduino shield - MKR Proto Shield
19.92 EUR
"The Arduino MKR Proto Shield is a prototyping shield designed for your MKR board. This shield easily plugs onto your MKR using the sockets/pin headers provided and has a duplicate breakout for each pin on the board along with many solderable through-holes on a standard 0.1"" grid (2.54 mm).Dimensions (L x W): 61.5 x 25 mm"
IDUINO ARD SHD2 DATA - Arduino Shield – data detection shield
16.77 EUR
"Dedicated shield for data logging on an SD card. It is easy to assemble and customise and is well documented.SD cards in FAT16 or FAT32 formats are supported, a 3.3-V level converter protects your storage medium from damage.
The integrated real-time clock module (RTC) allows correct time values even without an Arduino connected.
Compatible with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or newer. ADK/Mega R2 and older are not supported.
Features
- Replaceable CR1220 battery
- 102 soldering pads (prototyping area)
- Reset button
JOY-IT RPI SHD MOTOPI - Raspberry Pi Shield - MotoPi motor control
37.13 EUR
The MotoPi board is an expansion board for controlling and using up to 16 PWM controlled 5V servo motors.The own clock on the MotoPi provides a very accurate PWM signal and therefore also an accurate positioning. The board has 2 inputs for a voltage of 4.8V - 6V over which together up to 11A can be fed, so that an optimal supply of the motors is always guaranteed and thus also larger projects can be supplied with sufficient current. The supply runs centrally via the MotoPi, which provides a connection for voltage, ground and the control line separately for each motor.
The current is additionally buffered by the built-in capacitor. This mitigates the collapse of the voltage in the event of a brief overload, which could otherwise lead to jerking. In addition, it is possible to connect a further capacitor.
The integrated analog-digital converter, offers new possibilities such as: control via a joystick. The control and programming of the motors can, as usual, still be operated comfortably via the Raspberry Pi. Instructions and code examples allow even beginners to achieve results quickly.
Technical data
• 16 channels (16x PWM)
• own clock for servo motors (PWM)
• analog-digital converter
• input 1: hollow connector 5.5 / 2.1 mm, 4.8 ... 6 V, 5 A max.
• Input 2: Screw terminal, 4.8 ... 6 V, 6 A max.
• compatible with all common Raspberry Pi boards
Scope of delivery
• circuit board
• user manual
• mounting material
dimensions (WxHxD): 65 x 24 x 56 mm
Delivery without Raspberry Pi
FREI ARD SHD SCREW3 - Arduino Shield - Screw Shield Terminal
14.65 EUR
The terminal expansion board can easily expand your terminal or connect it to other boards. Free your Arduino project from the limitations of a single breadboard.
ADAFRUIT ARDUINO SHD LCD - Arduino LCD shield kit, 16x2 blue-and-white display
36.77 EUR
The Adafruit LCD shield with 5 buttons is designed for use with the Arduino™ and other devices.Features
• 16x2-character display
• 3 backlight pins
• 5 keypad pins
• I²C interface
Use
• Arduino Uno™, Duemilanove, Diecimilla and Mega R3
ARD SHD P MKR L - Arduino shield - MKR Proto Shield
23.49 EUR
The MKR Proto Large Shield plugs onto your MKR board using the sockets/pin headers provided and the mounting holes allow you to make repairs anywhere you may require. This shield features a larger prototyping area with more than 300 solder points and makes connecting components to your board super simple thanks to the silk layer that indicates the location of the MKR board pinsDimensions (L x W): 80 x 50 mm
ARD MKR SHD GRV - Arduino MKR Shield - Grove
33.67 EUR
"Connect the Arduino MKR to the large Grove ecosystem.The shield is perfect for rapid prototyping without soldering. Simply connect your sensors directly to this shield with Grove connectors.
- 14x Grove connections
- I²C and UART interface
The board offers both Single Grove and Double Grove analogue inputs"
ADAFRUIT ARD SHD PROTO - Arduino Shield - Protoshield for Arduino-Kit
21.22 EUR
"This prototyping shield works with almost all Arduino models and comes with header bars. You can choose which of them you would like to use.- IC pattern for attaching DIP ICs with up to 20 pins
- Tracks along the middle and sides
- Reset button and additional button for general use
- with two 3 mm LEDs
- ICSP stacking bar for stacking any kind of shields
- compatible with small experimental systems "
JOY-IT ARD SHD MOTORINO - Arduino Shield - Motorino, 16 channel controls
34.45 EUR
The Motorino board is an extension-board to control and use up to 16 PWM-controlled 5V-Servo-motors.The included clock generator ensures a very precise PWM signal and a very precise positioning. The board has 2 inputs for voltage from 4.8V to 6V which can be used for up to 11A. With this input, a perfect power supply is always guaranteed and even bigger projects are no problem. The supply runs directly over the Motorino which provides a connection for voltage, ground and control.
With the build in capacitor, the voltage is buffered which prevents a sudden voltage-drop at a high load. But there is also the possibility to connect another capacitor. The control and the programing can be done, as usual, with the Arduino. Manuals and code examples allows a quick introduction for beginners.
Specifications
• 16 Channels , own clock generator
• Input 1: Coaxial power connector 5.5 / 2.1 mm , 4.8 ... 6 V, 5 A max.
• Input 2: Screw-terminal, 4.8 ... 6 V, 6 A max.
• compatible with Arduino Uno, Mega and may more microcontroller with Arduino compatible pinout
Scope of supply
• board
• manual
Dimensions: 69 x 24 x 56 mm
ALLNET ARD SHD LCD - Arduino Shield - Display LCD kit, 16x2 blue/white
21.84 EUR
The LCD-Shield with 5 buttons from Allnet is designed for the Arduino™ among others.
ARD SHD ASX00031 - Arduino Pro - Portenta Breakout Expansion Board
56.98 EUR
"The Arduino Portenta breakout board allows easy access to the 80-pin high-density connectors of the Portenta series. This greatly simplifies prototyping including measurement or control of signals, making the board ideal for developing and designing custom hardware for the Portenta family (for example Portenta H7).
The breakout board offers you among other things:
- Power button
- Switch for selecting the boot mode
- Access to all signals of the high-density connectors
- Power supply via terminals
- Power supply backup via CR2032 battery
Interfaces
- USB-A
- Gbit Ethernet
- MicroSD slot
- OpenMV camera port
Applications
- Prototyping
- Development
FREI ARD SHD IO BOARD - Arduino Shield – I/O YUN Expansion Board
13.52 EUR
As an expansion board for the linker kit family, this expansion board forwards the ports of the Arduino Uno to Grove connections. The sockets of the Arduino are also passed through and thus remain usable.Features
• 2.54 Grove connectors
• Arduino form factor
• supports Dupont cables
FREI ARD SHD XBEE IO - Arduino Shield - Xbee I/O expansion board
14.5 EUR
Xbee I/O expansion boardExtended 14 digital IO ports (12 servo interface) and power supply
• 6 analog IO ports and power supply
• 1 digital port for external power supply
• automatic switching between digital port and integrated external power supply
• 1 input terminal for external power supply + input pins
• RS485 interface
• reset button
• interface for xbee/Bluetooth Bee Bluetooth wireless modules
• APC220 / Bluetooth V3 interfaces for Bluetooth wireless data transmission
• IIC / I2C / TWI interfaces
• 3.3 V output connector
• interface for SD card module
JOY-IT DEBO MOTODRIVER2 - Developer boards - MotoDriver2, L298N
17.17 EUR
The MotoDriver2 is an extension board which can be easily and quickly connected to your Arduino and allows you to control and to supply up to two DC-motors. Additional power supplys for your motors, or large amounts of cables, are no longer needed. The board allows to control with a constant voltage between 5V and 35V.Specifications
• Driver: L298N
• Logical voltage: 5V
• Drive Voltage: 5V— 35V
• Drive Current: 2A
• Power: Max. 25W
Dimensions (L x B x H): 43 x 43 x 27 mm
ARD MKR SHD ETH - Arduino MKR Shield - Ethernet
43.96 EUR
"Ethernet expansion board for all MKR boards.The cable connection is faster and more stable than the usual connection via WLAN and is particularly useful in locations where electromagnetic interference is a problem or where there are special safety requirements.
- Microcontroller: Wiznet W5500
- Interface: SPI
- Connection:1x RJ45, female
- SPI SD card slot
- compatible with all MKR boards