Review Ard mkr shd rgb arduino shield rgb matrix 84 leds ap102

ARD MKR SHD MEM - Arduino MKR Shield - SD card and flash memory 34.96 EUR Do you need more memory for your application with the Arduino MKR? Use this board and get 2 MB of fast flash memory. Or expand the memory space as you like by using this board with an SD memory card!

1x micro SD card slot

2 MB SPI flash memory

Note

Supplied without a memory card

SEE OFFER SEE OFFER ebay

ARD SHD P MKR SD - Arduino shield - MKR SD Proto Shield 25.66 EUR The Arduino MKR SD Proto Shield allows you to easily connect an SD card to your MKR form factor board. There is also a small prototyping area for soldering components.

SEE OFFER SEE OFFER ebay

ARD MKR SHD ENV2 - Arduino Shield - Rev 2 MKR environmental sensors 54.09 EUR The second revision of the Shield includes several latest generation sensors to collect environmental data. These include:

Air pressure
Temperature and humidity

UVA and UVB intensity

Technical Data

Operating voltage: 3.3 V
Communication: I²C, analog
Built-in sensors:
- ST LPS22HB
- ST HTS221
- VISHAY TEMT6000
dimensions (LxW): 61 x 25 mm

Note:

SEE OFFER SEE OFFER ebay

ARD MKR SHD GRV - Arduino MKR Shield - Grove 33.67 EUR Connect the Arduino MKR to the large Grove ecosystem.

The shield is perfect for rapid prototyping without soldering. Simply connect your sensors directly to this shield with Grove connectors.

14x Grove connections

I²C and UART interface

The board offers both Single Grove and Double Grove analogue inputs

SEE OFFER SEE OFFER ebay

ARD MKR SHD GPS - Arduino Shield- positioning MKR, GPS, GLONASS, Galileo 57.44 EUR This shield complements your Arduino MKR by supporting the following GNSS (Global Navigation Satellite System) and thus worldwide satellite-based positioning:
•GPS •GLONASS • Galileo

Examples of use

For monitoring fleets or swarms
scientific experiments at high altitude
general localisation

The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is designed for use on MKR format boards, but thanks to its Eslov connector it can also be connected with a cable to any board with such a connector.

Technical data

GNSS receiver: SAM-M8Q
Connections: MKR, Eslov
Battery: CR1216 (not included)
Communication: Serial / I2C / DCC

SEE OFFER SEE OFFER ebay

ARD SHD MKR2UNO - Arduino shield - MKR2UNO adapter 27.83 EUR With the MKR2UNO adapter, you can convert your Arduino UNO form factor-based project into an MKR-based project without much effort!

Technical data

Operating voltage: 3.3 V
Input voltage: 7 - 12 V
DC current for 3.3 V Pin: 700 mA
DC Strin for 5 V Pub: 700 mA

Dimensions (LxW): 68.6 x 53.4 mm

Note

Please remember that the MKR2UNO is only a form factor adapter and therefore there is NO voltage translation. Be careful before connecting a shield, as a shield without IOREF level shifting capability may not work properly.

SEE OFFER SEE OFFER ebay

ARD SHD P MKR L - Arduino shield - MKR Proto Shield 23.49 EUR The MKR Proto Large Shield plugs onto your MKR board using the sockets/pin headers provided and the mounting holes allow you to make repairs anywhere you may require. This shield features a larger prototyping area with more than 300 solder points and makes connecting components to your board super simple thanks to the silk layer that indicates the location of the MKR board pins

Dimensions (L x W): 80 x 50 mm

SEE OFFER SEE OFFER ebay

JOY-IT DEBO LED MATRIX1 - Developer boards - LED matrix, 64 x 64 RGB pixels 57.39 EUR Full color matrix module

This LED matrix is a 64x64 RGB pixel matrix which can be used with microcontrollers (e.g. Arduino, Micro:Bit and many more) or e.g. a Raspberry Pi.

The small grid of 3 mm allows good representations to be achieved.

Display type: RGB LED
Resolution: 64x64
Number: 4096 LEDs
LED size: 3 mm pitch
Dimensions: 192 x 192 x 14 mm
Supply voltage: 5 V
max. power consumption: 40 W
Control: 1/32 Scan
Operating temperature: -20 - 55 °C
Viewing angle: 140°.
Pixel density: 111,111 pixels/m²

Scope of delivery
LED matrix and cable

SEE OFFER SEE OFFER ebay

ARD SHD P MKR - Arduino shield - MKR Proto Shield 19.92 EUR The Arduino MKR Proto Shield is a prototyping shield designed for your MKR board. This shield easily plugs onto your MKR using the sockets/pin headers provided and has a duplicate breakout for each pin on the board along with many solderable through-holes on a standard 0.1'' grid (2.54 mm).

Dimensions (L x W): 61.5 x 25 mm

SEE OFFER SEE OFFER ebay

ADAFRUIT ARD SHD DATA - Arduino Shield - data logging shield 24.89 EUR With these Shield you can saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program.

SD card interface works with FAT16 or FAT32 formatted cards
3.3 V level shifter circuitry prevents damage to your SD card
for the Prototyping area with soldering connectors, circuitry or sensors
Onboard 3.3 V regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run

SEE OFFER SEE OFFER ebay

ADAFRUIT ARD SHD MOTOR - Arduino Shield - Engine, TB6612FNG 35.74 EUR This shield does incredibly fast work on your next robot project. It can drive up to 4 AC or 2 stepper motors.

Supply voltage: 4.5 - 13.5 V DC
2 connections for 5 V servos
TB6612 chipset with 1.2A per bridge
Engines are automatically disabled at power up
Arduino reset button
Dimensions: 70 x 55 x 10 mm
SEE OFFER SEE OFFER ebay

ARD SHD ASX00027 - Arduino Pro Shield - Portenta LPWAN Cat. M1/NB IoT GNSS 99.67 EUR The Portenta Cat. M1/NB IoT GNSS Shield brings cellular communication and positioning to the Portenta H7 boards.

The Shield uses a Cinterion TX62 radio module designed for high-efficiency, low-power IoT applications and optimized bandwidth and performance.
The Shield enables the development of asset tracking and remote monitoring applications (agriculture, smart cities, utilities) combined with the powerful computing power of Portenta H7. This is a Works with Arduino product, developed by Arduino and Thales.

• add NB-IoT, CAT.M1 and positioning to Portenta.
• change connectivity capabilities without changing the board.
• reduce communication bandwidth requirements in IoT applications
• low power module
• implement a small multiprotocol gateway (H7 WiFi - BT + NB-IoT/CAT.M1)
• compatible with MKR boards and Portenta H7

Technical data

• Cinterion TX62 radio module (see data sheet)
• NB-IoT - LTE CAT.M1
• 3GPP Rel.14 compliant protocol LTE Cat. M1/NB1/NB2
• UMTS BANDS: 1 - 5 / 8 / 12 (17) / 13 / 18 - 20 / 25 - 28 / 66 / 71 / 85
• LTE Cat.M1 DL: max. 300 kbps, UL: max. 1.1 Mbps
• LTE Cat.NB1 DL: max. 27 kbps, UL: max. 63 kbit/s
• LTE Cat.NB2 DL: max. 124 kbps, UL: max. 158 kbps
• point-to-point mobile terminated (MT) and mobile originated (MO) text mode
• Protocol Data Unit (PDU) mode
• GNSS capability (GPS/BeiDou/Galileo/GLONASS)
• Embedded IPv4 and IPv6 TCP/IP stack access
• Internet services: TCP server/client, UDP client, DNS, Ping, HTTP client, FTP client, MQTT client Secure connection with TLS/DTLS Secure Boot

Possible application areas

• Remote monitoring
• industry and agriculture
• public utilities
• asset tracking
• daily life
• fleet management of industrial vehicles

SEE OFFER SEE OFFER ebay

ARD SHD 4 RELAIS - Arduino Shield - Relay 4, 30.22.7.005.0010 39.72 EUR The Arduino 4 Relays Shield allows your Arduino to run under high loads.

Maximum current of single-pole switch contact: 30 VDC, 2 A
Maximum load voltage: 48 V
Maximum switching capacity: 60 W

SEE OFFER SEE OFFER ebay

SEEED ARD SHD SOLAR V2 - Arduino Shield - Solar charger v2.2, ETA1036 / CN3065 26.18 EUR Description
The solar charger is a stackable shield to Arduino compatible platforms, enables adaptive battery power and act as energy harvester for in-field charging. You may use various batteries that has the voltage of 3.0V-4.2V to shift up for 5V output, or put on Li-ion battery and solar panel to form an autonomous sensor unit. The maximum current provided by the board can get up to 600mA. An usb connector is also useful to charge the battery.

Features
• Output Disconnect
• Short circuit protection
• 3W Output Power when connecting battery
• Continuous Charge Current Up to 900mA
• Battery status indication ( Red : Charging , Green: Charged )
• Micro-USB Connector

Specification
• Battery input voltage: 3.0~4.5V
• USB input voltage: 4.75~5.25V
• Solar input voltage: 4.8~6V
• Maximum Output Power(with battery): 3W(600mA@5V)
• Ripple voltage:<100mV @ 500mA
• Dimensions: 68*53mm

SEE OFFER SEE OFFER ebay

ARD UNO R4 WIFI - Arduino UNO Rev4 WiFi, RA4M1, ESP32-S3 35.79 EUR The Arduino UNO R4 WiFi combines the computing power and exciting new peripherals of Renesas' RA4M1 microcontroller with the wireless connectivity performance of Espressif's ESP32-S3.

In addition, the UNO R4 WiFi features an integrated 12x8 LED matrix, a QWIIC connector, a VRTC pin for a backup battery, and an OFF pin.
With the UNO R4 WiFi, you can easily upgrade your project and add wireless connectivity to extend the reach of your current project.
If this is your first project, this board simply has everything you need to spark your maximum creativity.

Hardware Compatibility with UNO Form Factor
The UNO R4 WiFi maintains the same form factor, pinout, and 5V operating voltage as its predecessor the UNO R3. This ensures a seamless transition for existing shields and projects.

Expanded memory and faster clock
The UNO R4 WiFi has more memory and a higher clock frequency, enabling more precise calculations and effortless processing of complex projects.

Additional on-board peripheral capabilities
The UNO R4 WiFi offers a range of on-board peripherals, including a 12-bit DAC, CAN-BUS, and OP AMP, providing enhanced capabilities and design flexibility.

HID Support
Integrated HID support allows the UNO R4 WiFi to simulate a mouse or keyboard via USB-C.

Wi-Fi® and Bluetooth®
The UNO R4 WiFi features an ESP32-S3 module, enabling wireless connectivity. Combined with the Arduino IoT Cloud, Makers can now monitor and control their projects remotely.

QWIIC connector
The UNO R4 WiFi features a QWIIC I2C connector that allows for easy connection into the QWIIC ecosystem. Adapter cables allow compatibility with sensors and actuators based on other connector standards.

Support for a battery-powered RTC
The UNO includes additional pins, such as an ''OFF'' pin to turn off the board and a ''VRTC'' pin that powers the internal real-time clock and keeps it running.

LED Matrix
The UNO R4 WiFi has a bright 12x8 red LED matrix, ideal for creative projects with animations or plotting sensor data without the need for additional hardware.

Runtime error diagnostics
The UNO R4 WiFi includes an error recovery mechanism that detects runtime crashes and provides detailed explanations with hints on the line of code that caused the crash.

Specifications
• USB-C connector
• Renesas RA4M1 (Cortex M4)
• HID interface (simulate a mouse or keyboard)
• improved power supply (up to 24 V via VIN)
• CAN bus
• DAC (12 bits)
• OP AMP
• WiFi/BT LE (ESP32-S3)
• fully addressable LED matrix (12x8 matrix)
• QWIIC I2C connector
• RTC (with support for a buffer battery)
• diagnosis of runtime errors

External links
https://docs.arduino.cc/

SEE OFFER SEE OFFER ebay

SEEED XIAO RGB 6X10 - Xiao Shield - LED matrix 6x10, 60 LEDs, RGB 17.55 EUR The 6x10 RGB Matrix expansion board for Seeed Studio XIAO is the perfect addition for your portable devices with the XIAO series.

LED appearance, scene lighting
LED point light source, LED pixel screen
all kinds of electronic products and electrical equipment marquee
portable devices
mobile devices

This remarkable matrix brings a vibrant spectrum of color to your projects. With 60 LEDs in a compact size where each is a 1x1mm WS2812B LED, this matrix goes beyond mere aesthetics to bring your creative vision to life. Whether you're working on an interactive piece of art, developing a dynamic notification system or simply want to add a shiny accent to your creations, this matrix serves as the ultimate canvas. Seamlessly integrated with the XIAO main controller and QT Py for Adafruit, it features VCC, GND and DIN solder pads that provide unparalleled customizability for a variety of scenarios.

Technical specifications

LED type: XL-1010RGBC-WS2812B
Number of LEDs: 60
Arrangement: 6 rows x 10 columns
LED size: 1 mm x 1 mm
Connection port: Digital
Additional pads: VCC, GND, DIN, DOUT

The 6x10 RGB matrix expansion board for Seeed Studio XIAO offers a versatile and powerful solution to add color and dynamics to your projects. With its high customizability and seamless integration into the XIAO series, it is perfect for a wide range of applications, from interactive artwork and dynamic notification systems to portable devices and mobile applications.

External links
https://wiki.seeedstudio.com/rgb_matrix_for_xiao/

SEE OFFER SEE OFFER ebay

FREI ARD LED 32X16 WT - Arduino - LED matrix, 32 x 16 LEDs, white 17.18 EUR Großes Dot-Matrix-LED-Panel

Spezifikationen
• 32 x 16 weiße LEDs mit hoher Helligkeit (insgesamt 512 LEDs) im 10 mm Raster
• Betriebsspannung: 5 V
• sichtbar aus über 12 m Entfernung
• robuster Kunststoffrahmen
• Controller IC's auf der Platine, einfache getaktete Datenschnittstelle
• Arduino-kompatible Bibliothek, Grafikfunktionen und Beispielunterstützung
• Maße (L x B x H): 320 x 160 x 14 mm (einschließlich rückseitiger Anschlüsse)

SEE OFFER SEE OFFER ebay

ARD SHD P MEGAR3 - Arduino Shield - Proto Shield R3 15.48 EUR The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder.

Dimensions (LxW): 101.5 x 53.3 mm

SEE OFFER SEE OFFER ebay

FREI ARD SHD LCD3,5 - Arduino Shield - Display 3.5'', 320 x 480, ILI9486 31.24 EUR This shield can be used to add a 3.5'' (8.9 cm) display to an Arduino Uno, Mega or Leonardo.

Features
• 320 x 480 resolution
• 8-bit parallel interface
• SPI interface for SD slot
• LCD controller: ILI9486 / R61581
• without touch function
• display with LED backlight
• compatible with: Arduino Uno, Arduino Leonardo, Arduino Mega

external links
lcdwiki.com/3.5inch_Arduino_Display-UNO
optional driver: https://github.com/prenticedavid

Note: Driver may vary - ILI9486 / R61581

SEE OFFER SEE OFFER ebay

FREI ARD SHD XBEE IO - Arduino Shield - Xbee I/O expansion board 14.5 EUR Xbee I/O expansion board

Extended 14 digital IO ports (12 servo interface) and power supply

• 6 analog IO ports and power supply
• 1 digital port for external power supply
• automatic switching between digital port and integrated external power supply
• 1 input terminal for external power supply + input pins
• RS485 interface
• reset button
• interface for xbee/Bluetooth Bee Bluetooth wireless modules
• APC220 / Bluetooth V3 interfaces for Bluetooth wireless data transmission
• IIC / I2C / TWI interfaces
• 3.3 V output connector
• interface for SD card module

SEE OFFER SEE OFFER ebay

FREI ARD SHD L298P - Arduino Shield - Motor control unit, L298P 19.05 EUR L298P H-Bridge motor control

Specifications

• Control of two DC motors simultaneously with a voltage of 4.8 ... 24 V and up to 2 A
• Schottky diodes for protection against motor back voltage
• control of a servo motor with a special voltage regulator
• signal buzzer
• Bluetooth connection
• 6 digital and analog pins with 5V and GND pins for easy connection
• separate pins for connection to ultrasonic sensors

SEE OFFER SEE OFFER ebay

FREI ARD SHD SCREW3 - Arduino Shield - Screw Shield Terminal 14.65 EUR The terminal expansion board can easily expand your terminal or connect it to other boards. Free your Arduino project from the limitations of a single breadboard.

SEE OFFER SEE OFFER ebay

ALLNET ARD SHD LCD - Arduino Shield - Display LCD kit, 16x2 blue/white 21.84 EUR The LCD-Shield with 5 buttons from Allnet is designed for the Arduino™ among others.

SEE OFFER SEE OFFER ebay

FREI ARD SHD SCREW4 - Arduino Shield - Protoshield with screw terminals 13.62 EUR Protoshield with screw terminals

Specifications

• can be placed in the middle of a small breadplate as a paractic experimental extension
• convenient to use, reliable and durable

SEE OFFER SEE OFFER ebay

ADAFRUIT ARD SHD SCREW2 - Arduino Shield - Proto-Screwshield, R3-Kit 29.38 EUR This Protoshield features a large 2.54 mm pitch prototyping area and has sturdy screw terminals.

dual-use prototype shield
Pitch: 2.54 mm
with stacking bar for the 2x3 ICSP pins

SEE OFFER SEE OFFER ebay

JOY-IT ARD SHD CNC KIT2 - Arduino Shield - CNC Controller board 26.33 EUR Arduino CNC controller 4-axis CNC control card

The ARD-CNC-Kit2 is a specially developed expansion board that enables CNC machines to be controlled via an Arduino board. This kit stands out for its compatibility with GRBL v0.9, a popular open-source software package developed for CNC applications. Thanks to its support for GRBL v0.9, the ARD-CNC-Kit2 can utilise advanced features such as PWM (Pulse Width Modulation) for controlling spindle speed and the implementation of soft limits, which serve to keep the machine within safe operating limits. These functions are particularly important for users who require precise and safe machine control. The kit allows for the simultaneous control of up to four stepper motors, with each motor controlled by a DRV8825 motor driver.

These drivers are renowned for their efficiency and reliability and are supplied with heat sinks that ensure optimal heat dissipation. This minimises the risk of overheating and the resulting damage or loss of performance.

SEE OFFER SEE OFFER ebay

ARD MKR SHD CAN - Arduino MKR Shield - CAN bus 47.88 EUR The automotive interface is now on your Arduino MKR too! In the automotive sector, the CAN bus enables intelligent or autonomous vehicles and drones to be networked with various industrial sensors and motors.

Controller: Microchip MCP2515

Transceiver: NXP TJA1049

Compatible with all MKR boards

Input voltage either 5 V via the header connector or 7 to 24 V via threaded terminal ends.

SEE OFFER SEE OFFER ebay

JOY-IT ARD SHD CNC KIT - Arduino Shield - CNC controller board, A4988 25.35 EUR Controller board CNC 4x A4988 Motordriver for Arduino Uno.

detachable A4988 Motordriver
compatible to GRBL 0.8
control of up to 4 axes
reset-button
screw-terminals for power supply
input voltage: 12 - 36 V
dimensions: 53 x 68 x 18 mm

SEE OFFER SEE OFFER ebay

JOY-IT ARD SHD MOTORINO - Arduino Shield - Motorino, 16 channel controls 34.45 EUR The Motorino board is an extension-board to control and use up to 16 PWM-controlled 5V-Servo-motors.

The included clock generator ensures a very precise PWM signal and a very precise positioning. The board has 2 inputs for voltage from 4.8V to 6V which can be used for up to 11A. With this input, a perfect power supply is always guaranteed and even bigger projects are no problem. The supply runs directly over the Motorino which provides a connection for voltage, ground and control.

With the build in capacitor, the voltage is buffered which prevents a sudden voltage-drop at a high load. But there is also the possibility to connect another capacitor. The control and the programing can be done, as usual, with the Arduino. Manuals and code examples allows a quick introduction for beginners.

Specifications
• 16 Channels , own clock generator
• Input 1: Coaxial power connector 5.5 / 2.1 mm , 4.8 ... 6 V, 5 A max.
• Input 2: Screw-terminal, 4.8 ... 6 V, 6 A max.
• compatible with Arduino Uno, Mega and may more microcontroller with Arduino compatible pinout

Scope of supply
• board
• manual

Dimensions: 69 x 24 x 56 mm

SEE OFFER SEE OFFER ebay

FREI ARD LED 32X16 RD - Arduino - LED matrix, 32 x 16 LEDs, red 18.74 EUR Large dot matrix LED panel

Specifications

• 32 x 16 high brightness red LEDs (512 LEDs in total) in 10 mm pitch
• operating voltage: 5 V
• visible from more than 12 m distance
• robust plastic frame
• controller IC's on board, simple clocked data interface
• Arduino-compatible library, graphics functions and sample support
• dimensions (L x W x H): 320 x 160 x 14 mm (including rear connectors)

SEE OFFER SEE OFFER ebay

IDUINO ARD PSHD3 UNO - Arduino Shield - Protoshield kit with plug-in board, for Uno 12.33 EUR ProtoShield kit with plug-in board

Arduino ProtoShield prototype expansion board including mini breadboard. Can be used with Arduino ProtoShield prototype expansion board to build prototype circuit.
All pins and power supply led outside, perfect for building prototype circuit with Arduino.

Specifications

• 1 x reset button, 1 x general purpose button and 2 LED circuits.
• 5V, GND and raw pins
• SOIC space for IC
• mini breadboard with 170 points
• dimensions (L x W x H): 44 x 34 x10 mm

SEE OFFER SEE OFFER ebay

IDUINO ARD SHD JOYSTICK - Arduino Shield - Joystick Extension v1.0 13.41 EUR Joystick extension v1.0

This joystick/gamepad shield is based on Nokia 5110 LCD\
RF24L01 interface. You can easily develop joystick games and communicate wirelessly. The shield turns your Arduino into a simple controller with 7 buttons ( (4 x big buttons, 2 x small buttons + joystick select button ) and a two-axis thumb joystick.

Specifications

• nRF24L01 RF interface
• Nokia 5110 LCD interface
• Bluetooth interface
• I2C interface
• PS2 joystick
• Operating voltage: 3,3V or 5V e.g. STM32
• X,Y-axis with push button
• 6-button operation
• dimensions (L x W x H): 87 × 54 × 18 mm

SEE OFFER SEE OFFER ebay

IDUINO ARD SHD SCREW V3 - Arduino Shield - Screw-Shield V3 15.11 EUR Screw-Shield V3

This terminal expansion board can be screwed directly onto the terminal thread, reliable and convenient. It uses raised pins for easy connection of digital or analog sensors.

Features

• easy to use with Arduino UNO
• direct connection to the screw shield
• with contact pins for convenient connection of external digital or analog sensors

SEE OFFER SEE OFFER ebay

SEEED ARD SHD PROTOKIT - Arduino Shield - Protoshield Kit 18.21 EUR Description
Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1'' prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom shield.

Features
• Standard Arduino compatible
• Large 0.1''*0.1'' pitch prototyping area
• A variety of through-hole sizes to fit most parts
• Arduino UART and I2C port pin breakout for easy external communications
• Dual ISP breakouts for easy programming and stacking
• 3.3 volt, 5 volt, and ground power rails are easily available anywhere on the board
• Breadboard style prototyping area
• USB type B breakout
• Basic components included (buttons, switches, LEDs, resistors, USB jack)

Packing List
• 1x Arduino compatible Proto Board
• 1x B type USB connector
• 1x 40-pin 2.54mm male long header
• 1x 40-pin 2.54mm female header
• 2x 40-pin 2.54mm male header
• 1x 40-pin 2.54mm spacer
• 3x 8-pin 2.54mm female header
• 1x 6-pin 2.54mm female header
• 1x ISP female pin header
• 1x ISP male pin header
• 1x 10k Ohm rotary potentiometer
• 4x 1k Ohm through-hole resistor
• 2x 10k Ohm through-hole resistor
• 2x 3mm Red through-hole LED
• 2x 3mm Green through-hole LED
• 1x 3mm dual color through-hole LED
• 4x Mini push button switch
• 2x DPDT switch

For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.

SEE OFFER SEE OFFER ebay

FREI ARD LED 32X16 BL - Arduino - LED matrix, 32 x 16 LEDs, blue 18.63 EUR Large dot matrix LED panel

Specifications
-
• 32 x 16 high brightness blue LEDs (512 LEDs in total) in 10mm pitch.

• operating voltage: 5 V

• visible from more than 12 m distance
• robust plastic frame

• controller IC's on board, simple clocked data interface

• Arduino-compatible library, graphics functions and sample support

• dimensions (L x W x H): 320 x 160 x 14 mm (including rear connectors)

SEE OFFER SEE OFFER ebay

ARD SHD ASX00021 - Arduino Pro Shield - Portenta Vision with LAN 61.53 EUR Portenta Vision Shield: a production-ready solution for embedded ML applications in combination with the Arduino Portenta H7 board

The Vision Shield is supplied with a 324 x 324 pixel camera module containing an ultra low power image sensor designed for always-on vision devices and applications. The highly sensitive image sensors can capture gestures, ambient light, proximity detection and object identification.

• professional image processing
• directed audio detection
• Ethernet or LoRa (depending on shield)
• JTAG
• for Arduino Portenta

Arduino has teamed up with OpenMV to offer a free license for the OpenMV IDE, which allows an easy entry into image processing with MicroPython. With OpenMV, all professionals, researchers and developers can develop cost-effective Python-based camera vision and audio applications. With the two digital microphones integrated in all directions you can record sounds to the videos, which can be stored on a MicroSD card.

Transfer data either via Ethernet or LoRa®.

ARD SHD ASX00021 (Shield with LAN)
ARD SHD ASX00026 (Shield with LoRa)

Technical data

• Camera: Himax HM-01B0 Camera module
• resolution: 320 x 320 active pixel resolution with support for QVGA
• Image sensor: Highly sensitive 3.6-µ-BrightSenseTM pixel technology
• Microphones: 2x MP34DT06JTR
• Connection: LAN
• Interface: JTAG
• Dimensions (LxW): 66 x 25 mm

Scope of delivery
Portenta Shield with LAN function

external links
https://openmv.io/pages/download
https://www.arduino.cc/pro/tutorials/portenta-h7/por-openmv-bt

SEE OFFER SEE OFFER ebay

IDUINO ARD SHD XBEE - Arduino Shield - Xbee Bottom Board 11.45 EUR XBEE conversion board

This Arduino XBEE conversion board allows you to quickly and easily interface a Bluetooth XBEE module on a breadboard, without the need for jumper cables or soldering.
This board converts all 20 XBEE pins to double row pins with 0.25 cm standard spacing. The corresponding pins are clearly labeled for easy identification.

SEE OFFER SEE OFFER ebay

FREI ARD SHD USB ADK1 - Arduino Shield - USB host compatible with Google Android ADK 20.7 EUR USB host compatible with Google Android ADK

Functionality of a USB host, communicates with USB devices and serves as a USB hub.

Specifications

• supports Google Android ADK, Android phones G1, Nexus One, Nexus S, Motorola Droid (Requirement: Smartphone Android 2.3.4 / Tablet Android 3.1)
• provide compiled APK installation packages and ADK source files
• compatible with Arduino UNO 328 / Arduino Diecimila / Duemilanove 328 / Arduino Mega 2560(recommended)/ Arduino Mega 1280

SEE OFFER SEE OFFER ebay

ALLNET ARD SENSOR KIT-2 - Arduino 40-in-1 sensor kit, sensors and modules 49.95 EUR This Arduino™ sensor kit contains 40 sensors and modules:

- Joystick
- Relay
- Microphone
- 8 LED PCB
- Voltage regulator linear
- Flame
- Hall TTL
- Touch
- Temp I2C
- Buzzer
- Piezo Speaker 16R
- RGB-LED
- IR-optical detection
- Two color LED 5/3mm ''RED/GREEN
- Gas MQ-2
- Vibration
- Reed contact
- Heartbeat
- Flash LED
- Light barrier
- Button
- Shock
- Rotary encoder
- 5V Step-engine with driver PCB
- Tilt
- Photoresistor
- Temperature and humidity
- Potentiometer / analog hall
- 1W LED module WW
- Temperature 1Wire
- NTC treshold TTL / NTC 10k
- IR receiver 38KHz
- IR LED
- Motion detection PIR

SEE OFFER SEE OFFER ebay

ARD MKR SHD RGB - Arduino Shield - RGB Matrix, 84 LEDs, AP102

Comparison of Similar Products