APC SMT1500IC - Smart-UPS 1500VA LCD 230V

APC SMT750RMI2UC - Smart-UPS, 750VA, LCD RM 2U, 230V 762.1 EUR APC Smart-UPS 750VA LCD RM 2U 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

• Output power capacity: 500Watts / 750VA
• Max Configurable Power (Watts): 500Watts / 750VA
• Nominal Output Voltage: 230V
• Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion: Less than 5%
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Other Output Voltages: 220, 240
• Topology: Line Interactive
• Waveform type: Sine wave
• Output Connections: (2) IEC Jumpers (Battery Backup), (4) IEC 320 C13 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 160 - 286V
• Input voltage adjustable range for mains operation: 151 - 302V
• Number of Power Cords: 1
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 3hour(s)
• Replacement Battery: APCRBC123
• Expected Battery Life (years): 4 - 6
• RBC Quantity: 1

Communications & Management

• Interface Port(s): RJ-45 Serial, SmartSlot, USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Emergency Power Off (EPO): Optional
• Available SmartSlot™ Interface Quantity: 1

Cold-start capable
Provides temporary battery power when the utility power is out.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency
Reduces utility costs, generates less heat.

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power...

SEE OFFER SEE OFFER ebay

APC BR900MI - Back-UPS Pro, 900VA, LCD, 230 V 304.38 EUR Back UPS Pro BR 900VA, 6 Outlets, AVR, LCD Interface
High Performance Computer and Electronics UPS for Premium Power Protection

Output

• Output power capacity: 540Watts / 900VA
• Max Configurable Power (Watts): 540Watts / 900VA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (6) IEC 320 C13 (Battery Backup)
• Transfer Time: 10ms typical : 12ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 176 - 294V
• Maximum Input Current: 10.0A

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 12hour(s)
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1
• Battery Volt-Amp-Hour Capacity: 128

Communications & Management

• Interface Port(s): USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

• Data Line Protection: Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)
• Filtering: Full time multi-pole noise filtering :10% of IEEE surge let-through : zero clamping response time: instantaneous

Includes:

• USB cable
• User Manual

SEE OFFER SEE OFFER ebay

APC BR1600MI - Back-UPS Pro, 1600VA, LCD, 230 V 552.38 EUR Back UPS Pro BR 1600VA, 8 Outlets, AVR, LCD Interface

High Performance Computer and Electronics UPS for Premium Power Protection

Output

• Output power capacity: 960Watts / 1.6kVA
• Max Configurable Power (Watts): 960Watts / 1.6kVA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Output Connections: (6) IEC 320 C13 (Battery Backup), (2) IEC 320 C13

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 176 - 294V
• Maximum Input Current: 10.0A

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 16hour(s)
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1
• Battery Volt-Amp-Hour Capacity: 180

Communications & Management

• Interface Port(s): USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

• Surge energy rating: 509Joules
• Data Line Protection: RJ45 10/100/1000 Base-T Ethernet protection
• Filtering: Full time multi-pole noise filtering :10% of IEEE surge let-through : zero clamping response time: instantaneous

Includes:

• USB cable
• User Manual

SEE OFFER SEE OFFER ebay

APC BR1600SI - Back UPS Pro BR, 1600VA, LCD, 230V 666.08 EUR Back UPS Pro BR 1600VA, Sinewave,8 Outlets, AVR, LCD interface
High Performance Computer and Electronics UPS for Premium Power Protection

Technical Specifications

Output

• Output power capacity: 960Watts / 1.6kVA
• Max Configurable Power (Watts): 960Watts / 1.6kVA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Output Connections: (6) IEC 320 C13 (Battery Backup), (2) IEC 320 C13 (Surge Protection)

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 176 - 294V
• Maximum Input Current: 10.0A

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 16hour(s)
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1
• Battery Volt-Amp-Hour Capacity: 260

Communications & Management

• Interface Port(s): USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable
Provides temporary battery power when the utility power is out.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

LCD graphics display
Text and mimic diagrams that display modes of operation,...

SEE OFFER SEE OFFER ebay

APC SC450RMI1U - Smart-UPS, SC450VA, 1U, 230V 428.39 EUR APC Smart-UPS SC 450VA 230V - 1U Rackmount/Tower

APC Smart-UPS SC is ideal for small and medium businesses looking to protect networking equipment and point-of-sale (POS) devices from power disturbances and outages. The Smart-UPS SC features network grade protection, hot swap batteries, and built-in data line protection for worry free uninterruptible power protection for increased availability. Built on the same standards as the award-winning Smart-UPS, Smart-UPS SC provides the basic features and manageability needed to protect entry-level applications

Output

• Output power capacity: 280Watts / 450VA
• Max Configurable Power (Watts): 280Watts / 450VA
• Nominal Output Voltage: 230V
• Output Voltage Distortion: Less than 5% at full load
• Output Frequency (sync to mains): 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (2) IEC Jumpers (Battery Backup), (4) IEC 320 C13 (Battery Backup)
• Transfer Time: 4ms typical : 8ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 195 - 265V
• Input voltage adjustable range for mains operation: 151 - 302V

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 5hour(s)
• Replacement Battery: RBC18
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1

Communications & Management

• Interface Port(s): DB-9 RS-232
• Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
• Emergency Power Off (EPO): Optional

Front-access servicing
Simplifies installation and UPS maintenance while minimizing space requirements.

Multiple mounting methods
Allows for standardization on one product for use in different environments.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Lieferumfang:

• CD with software
• Rack Mounting Brackets
• Smart UPS signalling RS-232 cable
• User Manual

SEE OFFER SEE OFFER ebay

APC BR650MI - Back-UPS Pro, 650VA, LCD, 230 V 237.29 EUR Back UPS Pro BR 650VA, 6 Outlets, AVR, LCD Interface

High Performance Computer and Electronics UPS for Premium Power Protection

Output

• Output power capacity: 390Watts / 650VA
• Max Configurable Power (Watts): 390Watts / 650VA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (6) IEC 320 C13 (Battery Backup)
• Transfer Time: 10ms typical : 12ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 176 - 294V
• Maximum Input Current: 10.0A

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 12hour(s)
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1
• Battery Volt-Amp-Hour Capacity: 75

Communications & Management

• Interface Port(s): USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Includes:

• USB cable
• User Manual

SEE OFFER SEE OFFER ebay

APCSMT3000RMI2UC - Smart-UPS, 3000VA, LCD RM 2U, 230V 2879.3 EUR APC Smart-UPS 3000VA LCD RM 2U 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

• Output power capacity: 2.7kWatts / 3.0kVA
• Max Configurable Power (Watts): 2.7kWatts / 3.0kVA
• Nominal Output Voltage: 230V
• Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion: Less than 5%
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Other Output Voltages: 220, 240
• Topology: Line Interactive
• Waveform type: Sine wave
• Output Connections: (3) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup), (1) IEC 320 C19 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: British BS1363A, IEC-320 C20, Schutzkontakt CEE 7/EU1-16P
• Cord Length: 2meters
• Input voltage range for main operations: 160 - 286V
• Input voltage adjustable range for mains operation: 151 - 302V
• Number of Power Cords: 1
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 3hour(s)
• Replacement Battery: RBC43
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1

Communications & Management

• Interface Port(s): RJ-45 Serial, SmartSlot, USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Available SmartSlot™ Interface Quantity: 1

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates...

SEE OFFER SEE OFFER ebay

APCSMT750RMI2UNC - Smart-UPS, 750VA, LCD RM 2U NC, 230V 1103.19 EUR APC Smart-UPS 750VA LCD RM 2U 230V with Network Card

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

• Output power capacity: 500Watts / 750VA
• Max Configurable Power (Watts): 500Watts / 750VA
• Nominal Output Voltage: 230V
• Output Voltage Distortion: Less than 5%
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Other Output Voltages: 220, 240
• Topology: Line Interactive
• Waveform type: Sine wave
• Output Connections: (2) IEC Jumpers (Battery Backup), (4) IEC 320 C13 (Battery Backup)
• Transfer Time: 2ms typical

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 160 - 286V
• Input voltage adjustable range for mains operation: 151 - 302V
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 3hour(s)
• Replacement Battery: APCRBC123
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1

Communications & Management

• Interface Port(s): RJ-45 10/100 Base-T, RJ-45 Serial, SmartSlot, USB
• Pre-Installed SmartSlot™ Cards: AP9631
• Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Emergency Power Off (EPO): Optional

Cold-start capable
Provides temporary battery power when the utility power is out.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency
Reduces utility costs, generates less heat.

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Preinstalled network management card
Provides for remote management and control of the UPS over a network out of the box.

Single switched outlet...

SEE OFFER SEE OFFER ebay

APCSMT2200RMI2UC - Smart-UPS, 2200VA, LCD RM 2U, 230V 2311.84 EUR APC Smart-UPS 2200VA LCD RM 2U 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

• Output power capacity: 1.98kWatts / 2.2kVA
• Max Configurable Power (Watts): 1.98kWatts / 2.2kVA
• Nominal Output Voltage: 230V
• Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion: Less than 5%
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Other Output Voltages: 220, 240
• Topology: Line Interactive
• Waveform type: Sine wave
• Output Connections: (8) IEC 320 C13 (Battery Backup), (1) IEC 320 C19 (Battery Backup), (3) IEC Jumpers (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: British BS1363A, IEC-320 C20, Schutzkontakt CEE 7/EU1-16P
• Cord Length: 2meters
• Input voltage range for main operations: 160 - 286V
• Input voltage adjustable range for mains operation: 151 - 302V
• Number of Power Cords: 1
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 3hour(s)
• Replacement Battery: RBC43
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1

Communications & Management

• Interface Port(s): RJ-45 Serial, SmartSlot, USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Available SmartSlot™ Interface Quantity: 1

Cold-start capable
Provides temporary battery power when the utility power is out.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency
Reduces utility costs, generates less heat.

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Pure sine wave output on battery
Simulates utility power to...

SEE OFFER SEE OFFER ebay

APC SMX1000I - Smart SMX 1000I LCD UPS-800Watt-1000VA 1051.55 EUR APC Smart-UPS X, 1000 VA, Rack / Tower LCD, 230 V

SMX Series Smart-UPS Rack/Tower 48.3cm (19''), 800W / 1000 VA
Inputs

• 1x IEC 320 C14

Outputs

• 8x IEC 320 C13
• 2x IEC jumpers

This product is part of the Smart-UPS series, an intelligent and efficient line power protection offering from entry-level to scalable runtime.
This high quality and reliable 1000 VA / 800 W line-interactive UPS offers pure sine wave and scalable runtimes for critical applications.
The convertible (rack/tower) 2U SMX UPS has the ability to integrate a network management card for network-based monitoring and PowerChute Business Edition for unattended shutdown...

Advanced power protection for servers and network equipment

• Intuitive LCD user interface
• Display of battery replacement date
• Pure sinusoidal output signal in battery mode
• Battery failure notification
• Hot-swappable batteries
• Intelligent battery management

Automatic detection of external batteries
UPS system detects the connection of external battery modules and automatically updates the autonomy time.

Supports cold start

• Allows temporary battery operation when the mains supply fails
• Energy consumption meter
• Indication of usage in kilowatt hours for energy-conscious users.
• EPO (Energy Power-Off)

The instrument can be connected to an EPO (Emergency Power Off) system so that it is automatically switched off in an emergency situation.

Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.

High frequency design
Reduces or eliminates the need for bulky transformers, making equipment lighter and easier to handle.

High online efficiency

• Reduces power costs, generates less waste heat
• Intuitive LCD user interface

Easy-to-read interface with accurate information in multiple languages and support for on-site UPS configuration with user-friendly navigation buttons.

Group switchable outputs
Multiple output groups for separate control via the UPS system for targeted restart of unresponsive systems, sequential startup or shutdown of systems, or shutdown of non-critical loads.

External plug-and-play batteries
Ensures uninterrupted supply of clean power to connected equipment during installation of runtime extension modules.

Battery replacement date display
Dynamic display of recommended battery replacement date in month and year facilitates long-term maintenance planning.

Pure...

SEE OFFER SEE OFFER ebay

APC SMX750I - Smart SMX 750I LCD UPS - 500Watt- 750VA 792.02 EUR SMX Series Smart UPS Rack/Tower 48.3cm (19''), 500W / 750 VA

Smart and efficient solution for uninterruptible power supply of network systems, selection from entry-level to models with scalable autonomy time.
Ideal UPS for servers, POS systems, routers, switches, hubs and other devices.

Input Connections

• 1x IEC 320 C14

Output connection type

• 8x IEC 320 C13
• 2x IEC jumpers

Advanced power protection for servers and network equipment

• Intuitive LCD user interface
• Display of battery replacement date
• Pure sinusoidal output signal in battery mode
• Battery failure notification
• Hot-swappable batteries
• Intelligent battery management

Automatic detection of external batteries
UPS system detects the connection of external battery modules and automatically updates the autonomy time.

Supports cold start
Allows temporary battery operation when the mains supply fails.

Energy consumption meter
Indication of usage in kilowatt hours for energy-conscious users.

EPO (Energy Power-Off)
The device can be connected to an EPO (Emergency Power Off) system so that it is automatically switched off in an emergency situation.

Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.

High Frequency Design
Reduces or eliminates the need for bulky transformers, making equipment lighter and easier to handle.

High on-line efficiency
Reduces power costs, generates less waste heat.

Intuitive LCD user interface
Easy-to-read interface with accurate information in multiple languages and support for on-site UPS configuration with user-friendly navigation buttons.

Group switchable outputs
Multiple output groups for separate control via the UPS system for targeted restart of unresponsive systems, sequential startup or shutdown of systems, or shutdown of non-critical loads.

External plug-and-play batteries
Ensures uninterrupted supply of clean power to connected equipment during installation of runtime extension modules.

Battery replacement date display
Dynamic display of recommended battery replacement date in month and year facilitates long-term maintenance planning.

Pure sinusoidal output signal in battery mode
Simulates mains power supply for the highest possible compatibility with servers and sensitive electronic systems with active power factor correction.

Combination Rack/Tower
Protects existing UPS investments when moving from a tower to a...

SEE OFFER SEE OFFER ebay

APC BE650G2-GR - Back UPS, 650VA, 230V, USB 133.97 EUR APC Back-UPS 650VA, 230V, 1 USB charging port
Battery Backup & Surge Protector for Electronics and Computers

Output

• Output power capacity: 400Watts / 650VA
• Max Configurable Power (Watts): 400Watts / 650VA
• Nominal Output Voltage: 230V
• Efficiency at Full Load: 80.0 %
• Output Frequency (sync to mains): 47 - 63 Hz
• Output Frequency (not synced): 50/60 Hz +/-1 Hz
• Other Output Voltages: 220
• Topology: Standby
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (2) F CEE 7 (Surge Protection), (6) F CEE 7 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 47 - 63 Hz
• Input Connections: F CEE 7/7P
• Cord Length: 1.83meters
• Input voltage range for main operations: 180 - 266V
• Efficiency at Full Load: 80.0 %
• Maximum Input Current: 6.0A

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Expected Battery Life (years): 2 - 5
• Battery Volt-Amp-Hour Capacity: 75

Communications & Management

• Interface Port(s): USB
• Control panel: LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators, LED status display with On Line : On Battery : Replace Battery and Overload indicators
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

• Surge energy rating: 310Joules
• Data Line Protection: Analog phone line for phone/fax/modem/DSL (RJ-45 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.

Cold-start capable
Provides temporary battery power when the utility power is out.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Hot-swappable batteries
Ensures...

SEE OFFER SEE OFFER ebay

APC SMT750IC - Smart UPS 750VA / 500W 531.65 EUR APC Smart-UPS 750VA LCD 230V with SmartConnect
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Cold-start capable
Provides temporary battery power when the utility power is out.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency
Reduces utility costs, generates less heat.

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Serial connectivity
Provides management of the UPS via a serial port.

Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

LED status indicators
Quickly understand unit and power status with visual indicators.

Network manageable
Provides remote power management of the UPS over the network.

SEE OFFER SEE OFFER ebay

APC SRT2200RMXLN - Smart-UPS 2200 VA / 1980 W 3067.06 EUR APC Smart-UPS SRT, 2200 VA, rackmount, 230 V, network card

High-performance UPS systems with double-conversion online technology and scalable autonomy time.

Input:

• Input connection type: IEC 60320 C20
• Nominal input voltage: 230 V

Output:

• Output power capacity: 1.98kWatt / 2.2kVA
• Output Connections: (8) IEC 60320 C13 (power failure protection) + (2) IEC 60320 C19 (power failure protection)
• Nominal output voltage: 230 V

Battery failure notification
Analyses for early detection of battery faults enable timely preventive maintenance

ECO mode
Operating mode that bypasses unneeded electrical components when power is properly supplied to allow efficient operation without compromising availability

LCD graphic display
Display of operating modes, system parameters and alarms in the form of text and overview schematics.

Combination rack/tower unit
Protects existing UPS investments when moving from a tower to a rack environment.

SEE OFFER SEE OFFER ebay

SALICRU SALI 662AF000005 - UPS, 1500 VA / 900 W 211.29 EUR SPS 1500 ONE

• Technology: Line-interactive
• Design: tower

Input

• Nominal voltage: 220 V / 230 V / 240 V AC
• Voltage tolerance: up to 162 V - 290 V
• Stabilizer: AVR Buck / Boost
• Nominal frequency: 50 / 60 Hz
• Automatic detection frequency: Yes
• Protection: circuit breaker

Output

• 4x protective contact
• Nominal voltage: 220 V / 230 V / 240 V AC
• Precision voltage (battery mode): ±10%
• Power (VA): 1500
• Waveform (battery mode): modified sine wave
• Frequency: 50 / 60 Hz ± 1 Hz (1)
• Transmission time: 2 / 6 ms

The best electrical protection for domestic and professional office equipment
Salicru's SPS ONE series, an uninterruptible power supply system (UPS/UPS) in mini-tower format of line-interactive type, enables battery backup (with pseudo-sinusoidal inverter output) and protection against overloads.
During voltage interruptions, the SPS ONE units provide battery backup to perform a proper shutdown of the IT system and protect it against data loss and damage to the electronics.
Operation via automatic voltage regulation (AVR) to correct small voltage fluctuations without having to use the battery, thus extending its useful life.
The AVR function is essential in areas where voltage fluctuations occur frequently.

Integrates a UPS/PC communication interface of the USB type with HID protocol, allowing configuration of parameters, control of the UPS and shutdown and standby of the computer through the USB port.
Compatible with operating systems-Windows, Linux and Mac.
The software for monitoring and managing the UPS and closing files and applications for Windows, Linux and Mac operating systems is available for free download from www.salicru.com.

Batteries

• Battery type: lead/calcium, maintenance-free, sealed, design life 3-5 years
• Charge time: 4-6 hours to 90% of capacity
• Battery can be replaced by user: Yes
• Runtime: Up to 20 minutes
• Battery replacement and privacy: Yes
• Communication
• Ports: USB HID
• Monitoring software: For Windows, Mac, Linux and UNIX

Other features

• Cold startup (boot up using batteries): yes
• Automatic restart: Yes, when mains power is applied

Standards

• Safety: EN-IEC 62040-1
• Electromagnetic compatibility (EMC): EN-IEC 62040-12
• Operation: EN 62040-3
• Quality management and environmental protection: ISO 9001 & ISO 14001

SEE OFFER SEE OFFER ebay

APC BVX1600LI - Easy UPS, 1600VA / 900 W 230.3 EUR APC Easy UPS BVX 1600VA, 230V, AVR, IEC Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

• 1x IEC C13
• 220 - 240 V AC

Output:

• 6x IEC C14
• 230 V AC
• 1600 VA / 900 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BVX2200LI - Easy UPS, 2200VA / 1200 W 295.52 EUR APC Easy UPS BVX 2200VA, 230V, AVR, IEC Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

• 1x IEC C20
• 220 - 240 V AC

Output:

• 6x IEC C14
• 230 V AC
• 2200 VA / 1200 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BVX900LI - Easy UPS, 900VA / 480 W 152.38 EUR APC Easy UPS BVX 900VA, 230V, AVR, IEC Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

• 1x IEC C14
• 220 - 240 V AC

Output:

• 4x IEC C13
• 230 V AC
• 900 VA / 480 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BGM2200-GR - Back-UPS Pro Gaming, 2200 VA / 1320 W 440.64 EUR APC Back-UPS Pro, 2200VA/1320W, Tower, 230V, 4x protective contact and 2x IEC C13 outlets, RGB lighting, pure sine wave, Arctic (white)

This APC Back-UPS Pro offers first-class power protection for powerful games consoles and PCs, routers/modems and gaming accessories.
The 2200VA/1320W tower UPS has a total of 6 outlets, 3 with battery backup and surge protection and 3 with surge protection only.
It has a surge protection of 1080 joules.
It has automatic voltage regulation that corrects voltage dips and surges to the correct level. Included is PowerChute Serial Shutdown, an easy-to-use software for safely shutting down the system with power and energy management functions.
This UPS has 2 USB ports (type A + C) for smart charging of personal devices.

Output

• Max. configurable power in W: 1320 W
• Output frequency: 50/60 Hz +/-3 Hz mains synchronization
• UPS type: Line Interactive
• Wave type: Sine wave
• Runtime at full load: 00:30:00
• Runtime at half load: 00:04:29
• Max. configurable power in VA: 2200 VA
• Running time at 700 W: 00:04:00
• Switching time: 8 ms typical, 10 ms max.

Input

• Network frequency: 50/60 Hz +/-3 Hz
• Plug standard: earthing contact
• Input voltage limits: 168 - 302 V
• Max. Input current: 12 A
• Max. Switching current: 15 A
• Input harmonic distortion: Less than 3 % at full load
• Input protection type: Circuit breaker

Sustainability
With the Green PremiumTM label, Schneider Electric is committed to delivering products with world-class environmental performance. Green Premium promises compliance with current regulations, transparency on environmental impact, recyclability and products with a low carbon footprint.

SEE OFFER SEE OFFER ebay

APC BVX700LI-GR - Easy UPS, 700VA / 360 W 113.3 EUR APC Easy UPS BVX 700VA, 230V, AVR, Earthed Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

• 1x Power cord
• 220 - 240 V AC

Output:

• 2x Earthed socket outlet
• 230 V AC
• 700 VA / 360 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BV500I-GR - Easy-UPS BV UPS 500VA / 300W 113.3 EUR APC EASY UPS BV 500VA, AVR, Schutzkontakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers

Output

• Output power capacity: 300Watts / 500VA
• Max Configurable Power (Watts): 300Watts / 500VA
• Nominal Output Voltage: 230V
• Output Frequency (not synced): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
• Input Connections: Schutzkontakt CEE 7/7P
• Cord Length: 5ft (1.52meters)
• Number of Power Cords: 1

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Cold-start capable
Provides temporary battery power when the utility power is out.

Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

LED Indicators
Provide easy-to-read status of the unit and utility power conditions.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet...

SEE OFFER SEE OFFER ebay

APC BK650EI - APC Back-UPS CS, 400 watts/650 VA If service is required, please 211.45 EUR APC Back-UPS 650, 230V
Battery Backup & Surge Protector for Electronics and Computers

Output

• Output power capacity: 400Watts / 650VA
• Max Configurable Power (Watts): 400Watts / 650VA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 47 - 63 Hz
• Output Frequency (not synced): 50/60 Hz +/-1 Hz
• Topology: Standby
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (3) IEC 320 C13 (Battery Backup) + (2) IEC Jumpers + (1) IEC 320 C13
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 47 - 63 Hz, 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 180 - 266V
• Input voltage adjustable range for mains operation: 160 - 286V
• Number of Power Cords: 2
• Maximum Input Current: 7.0A

Serial connectivity
Provides management of the UPS via a serial port.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

LED status display
Quickly understand unit and power status with visual indicators.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Approvals:
A-tick, C-tick, CE, GOST, NEMKO

Direct service!
• Free customer hotline: 0800 101 00 67

SEE OFFER SEE OFFER ebay

APC BKRS1200 SCH - Power-saving Back-UPS Pro, 1200 VA protective contact plug If se 531.71 EUR Power-Saving Back-UPS Pro 1200, 230V, Schutzkontakt
High Performance Computer and Electronics UPS for Premium Power Protection

Output

• Output power capacity: 720Watts / 1.2kVA
• Max Configurable Power (Watts): 720Watts / 1.2kVA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Output Frequency (not synced): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveformtype: Stepped approximation to a sinewave
• Output Connections: (3) Schutzkontakt CEE 7 + (3) Schutzkontakt CEE 7 (Battery Backup)
• Transfer Time: 10ms typical : 12ms maximum
• Bypass: Built-in Bypass

Input

• Nominal Input Voltage: 230V
• Input frequency: 50 Hz +/- 1 Hz, 60 Hz +/- 1 Hz
• Input Connections: Schutzkontakt CEE 7/7P
• Cord Length: 5ft (1.52meters)
• Input voltage range for main operations: 176 - 294V
• Input voltage adjustable range for mains operation: 156 - 300V
• Maximum Input Current: 10.0A

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable
Provides temporary battery power when the utility power is out.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and...

SEE OFFER SEE OFFER ebay

APC BV650I - Easy-UPS BV UPS 650VA / 375W 102.97 EUR APC EASY UPS BV 650VA, AVR, IEC Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers


Output

• Output power capacity: 375Watts / 650VA
• Max Configurable Power (Watts): 375Watts / 650VA
• Nominal Output Voltage: 230V
• Output Frequency (not synced): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (6) IEC 320 C13 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Cord Length: 5ft (1.52meters)
• Number of Power Cords: 1

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Cold-start capable
Provides temporary battery power when the utility power is out.

Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

LED Indicators
Provide easy-to-read status of the unit and utility power conditions.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a...

SEE OFFER SEE OFFER ebay

APC BV650I-GR - Easy-UPS BV UPS 650VA / 375W
113.3 EUR APC EASY UPS BV 650VA, AVR, Schutzkonakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers

Output

• Output power capacity: 375Watts / 650VA
• Max Configurable Power (Watts): 375Watts / 650VA
• Nominal Output Voltage: 230V
• Output Frequency (not synced): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
• Input Connections: Schutzkontakt CEE 7/7P
• Cord Length: 5ft (1.52meters)
• Number of Power Cords: 1

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Cold-start capable
Provides temporary battery power when the utility power is out.

Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

LED Indicators
Provide easy-to-read status of the unit and utility power conditions.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of...

SEE OFFER SEE OFFER ebay

APC BVX700LI - Easy UPS, 700VA / 360 W 124.84 EUR APC Easy UPS BVX 700VA, 230V, AVR, IEC Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

• 1x IEC C14
• 220 - 240 V AC

Output:

• 4x IEC C13
• 230 V AC
• 700 VA / 360 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BVX1200LI-GR - Easy UPS, 1200VA / 650 W 180.29 EUR APC Easy UPS BVX 1200VA, 230V, AVR, Earthed Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

• 1x Power cord
• 220 - 240 V AC

Output:

• 4x Earthed socket outlet
• 230 V AC
• 1200 VA / 650 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BV1000I - Easy-UPS BV UPS 1000VA / 600 W 154.6 EUR APC EASY UPS BV 1000VA, AVR, IEC Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers

Output

• Output power capacity: 600Watts / 1.0kVA
• Max Configurable Power (Watts): 600Watts / 1.0kVA
• Nominal Output Voltage: 230V
• Output Frequency (not synced): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (6) IEC 320 C13 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Cord Length: 5ft (1.52meters)
• Number of Power Cords: 1

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Cold-start capable
Provides temporary battery power when the utility power is out.

Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

LED Indicators
Provide easy-to-read status of the unit and utility power conditions.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power...

SEE OFFER SEE OFFER ebay

APC BVX2200LI-GR - Easy UPS, 2200VA / 1200 W 293.97 EUR APC Easy UPS BVX 2200VA, 230V, AVR, Earthed Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

• 1x Power cord
• 220 - 240 V AC

Output:

• 4x Earthed socket outlet
• 230 V AC
• 2200 VA / 1200 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BKRS900 SCH - Power-Saving Back-UPS Pro,900VA protective contact. 347 EUR Power-saving Back-UPS Pro 900, 230 V, protection contat

Powerful UPS with premium protection features for computers and electronic systems.

Output

• Output power capacity: 540Watt / 900VA
• Maximum configurable power (watts): 540Watt / 900VA
• Nominal output voltage: 230V
• Output frequency (mains synchronized): 50/60 Hz +/-1 Hz
• Output frequency (non-synchronized): 50/60 Hz +/-1 Hz
• Topology: Line-Interactive
• Output connections: (2) protective contact CEE 7 + (3) protective contact CEE 7 (mains failure protection)
• Transfer Time: 8ms typical : 10 ms maximum

Input

• Nominal input voltage: 230V
• Input frequency: 50/60 Hz +/-3 Hz (automatic scanning)
• Input connection type: earthing contact CEE 7/7P
• Cable length: 1.52Meter
• Input voltage range for mains operation: 176 - 294V
• Input voltage adjustment range for main operations: 156 - 300V

Automatic Voltage Regulation (AVR)
Automatically increases the low voltage gradually and decreases the high voltage to levels suitable for your equipment.

Surge Protectors
Protects connected equipment from overvoltages on data lines.

LC display
The alphanumeric display shows system parameters as well as warnings.

USB interface
Allows the UPS to be managed via the USB port.

Intelligent battery management
An intelligent precision charging system optimizes battery performance, life and reliability.

Adjustable voltage sensitivity
Switch between predefined thresholds (high, medium or low tolerance) - depending on available power quality - to increase battery life and protect sensitive electronics.

Adjustable voltage switching points
Adjust the minimum and maximum voltage values (voltage range size) at which the UPS switches to battery power to increase battery life and protect sensitive electronics.

Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.

Sockets for connecting plug-in power supplies.
Protect equipment with input transformers without obscuring other outlets.

Automatic voltage regulation (AVR) with boost and trim function.
Increases UPS availability by correcting over- and undervoltages without using the battery.

Supports cold start
Allows temporary battery operation when mains power fails.

Battery failure notification
Analyses for early detection of battery faults enable timely preventive maintenance

Automatic self-test
Periodic battery self-tests for timely replacement of depleted...

SEE OFFER SEE OFFER ebay

APC BX2200MI - Back UPS, 2200VA / 1200 W 314.65 EUR APC Back-UPS 2200VA, 230V, AVR, IEC Sockets

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.

Input:

• Nominal Input Voltage: 230V
• Input Connections: IEC 60320 C20

Output:

• Output power capacity: 1.2kWatts / 2.2kVA
• Output Connections: (6) IEC 60320 C13 (Battery Backup)
• Nominal Output Voltage: 230V

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Ideal Power Protection for the following environments and devices:

• Home Office
  
  • Modem / Router
  • PC Desktop Computer
  • PC Monitor
  • Network-attached Storage (NAS)
• Home Entertainment
  
  • Modem / Router
  • TV Box
  • Television
  • Music Speaker
• Smart Home
  
  • Modem / Router
  • Smart Speaker
  • Home Security/Surveillance Camera

SEE OFFER SEE OFFER ebay