APC BVX700LI-GR - Easy UPS, 700VA / 360 W

113.3 EUR
Access the complete sheet with information, compare prices and identify the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it inserts into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
APC Easy UPS BVX 700VA, 230V, AVR, Earthed Sockets
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
Output:
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
EAN: 0731304404583
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
APC Easy UPS BVX 700VA, 230V, AVR, Earthed Sockets
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 2x Earthed socket outlet
- 230 V AC
- 700 VA / 360 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
EAN: 0731304404583
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 4x IEC C13
- 230 V AC
- 700 VA / 360 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 2200 VA / 1200 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 300Watts / 500VA
- Max Configurable Power (Watts): 300Watts / 500VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet...

113.3 EUR APC EASY UPS BV 650VA, AVR, Schutzkonakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 375Watts / 650VA
- Max Configurable Power (Watts): 375Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of...

123.64 EUR APC EASY UPS BV 1000VA, AVR, Schutzkontakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 600Watts / 1.0kVA
- Max Configurable Power (Watts): 600Watts / 1.0kVA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet...

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 1200 VA / 650 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 1600 VA / 900 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 2x Earthed socket outlet
- 230 V AC
- 900 VA / 480 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 450Watts / 800VA
- Max Configurable Power (Watts): 450Watts / 800VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical / 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for...

This APC Back-UPS Pro offers first-class power protection for powerful games consoles and PCs, routers/modems and gaming accessories.
The 2200VA/1320W tower UPS has a total of 6 outlets, 3 with battery backup and surge protection and 3 with surge protection only.
It has a surge protection of 1080 joules.
It has automatic voltage regulation that corrects voltage dips and surges to the correct level. Included is PowerChute Serial Shutdown, an easy-to-use software for safely shutting down the system with power and energy management functions.
This UPS has 2 USB ports (type A + C) for smart charging of personal devices.
Output
- Max. configurable power in W: 1320 W
- Output frequency: 50/60 Hz +/-3 Hz mains synchronization
- UPS type: Line Interactive
- Wave type: Sine wave
- Runtime at full load: 00:30:00
- Runtime at half load: 00:04:29
- Max. configurable power in VA: 2200 VA
- Running time at 700 W: 00:04:00
- Switching time: 8 ms typical, 10 ms max.
Input
- Network frequency: 50/60 Hz +/-3 Hz
- Plug standard: earthing contact
- Input voltage limits: 168 - 302 V
- Max. Input current: 12 A
- Max. Switching current: 15 A
- Input harmonic distortion: Less than 3 % at full load
- Input protection type: Circuit breaker
Sustainability
With the Green PremiumTM label, Schneider Electric is committed to delivering products with world-class environmental performance. Green Premium promises compliance with current regulations, transparency on environmental impact, recyclability and products with a low carbon footprint.

- Technology: line-interactive
- Design: tower
Input
- Nominal voltage: 220 V / 230 V / 240 V AC
- Voltage tolerance: up to 162 V - 290 V
- Stabilizer: AVR Buck / Boost
- Nominal frequency: 50 / 60 Hz
- Automatic detection frequency: Yes
- Protection: circuit breaker
Output
- 2x protective contact
- Nominal voltage: 220 V / 230 V / 240 V AC
- Precision voltage (battery mode): ±10%
- Power (VA): 700
- Waveform (battery mode): modified sine wave
- Frequency: 50 / 60 Hz ± 1 Hz (1)
- Transmission time: 2 / 6 ms
The best electrical protection for domestic and professional office equipment
Salicru's SPS ONE series, an uninterruptible power supply system (UPS/UPS) in mini-tower format of line-interactive type, enables battery backup (with pseudo-sinusoidal inverter output) and protection against overloads.
During voltage interruptions, the SPS ONE units provide battery backup to perform a proper shutdown of the IT system and protect it against data loss and damage to the electronics.
Operation via automatic voltage regulation (AVR) to correct small voltage fluctuations without having to use the battery, thus extending its useful life.
The AVR function is essential in areas where voltage fluctuations occur frequently.
Integrates a UPS/PC communication interface of the USB type with HID protocol, allowing configuration of parameters, control of the UPS and shutdown and standby of the computer through the USB port.
Compatible with operating systems-Windows, Linux and Mac.
The software for monitoring and managing the UPS and closing files and applications for Windows, Linux and Mac operating systems is available for free download from www.salicru.com.
Batteries
- Battery type: lead/calcium, maintenance-free, sealed, design life 3-5 years
- Charge time: 4-6 hours to 90% of capacity
- Battery can be replaced by user: Yes
- Runtime: Up to 20 minutes
- Battery replacement and privacy: Yes
- Communication
- Ports: USB HID
- Monitoring software: For Windows, Mac, Linux and UNIX
Other features
- Cold startup (boot up using batteries): yes
- Automatic restart: Yes, when mains power is applied
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN-IEC 62040-12
- Operation: EN 62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C13
- 220 - 240 V AC
Output:
- 6x IEC C14
- 230 V AC
- 1600 VA / 900 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 4x IEC C13
- 230 V AC
- 900 VA / 480 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C20
- 220 - 240 V AC
Output:
- 6x IEC C14
- 230 V AC
- 2200 VA / 1200 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 600Watts / 1.0kVA
- Max Configurable Power (Watts): 600Watts / 1.0kVA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power...

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 375Watts / 650VA
- Max Configurable Power (Watts): 375Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a...

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 6x IEC C13
- 230 V AC
- 1200 VA / 650 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 450Watts / 800VA
- Max Configurable Power (Watts): 450Watts / 800VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power...

Battery Backup & Surge Protector for Electronics and Computers
Output
- Output power capacity: 400Watts / 650VA
- Max Configurable Power (Watts): 400Watts / 650VA
- Nominal Output Voltage: 230V
- Efficiency at Full Load: 80.0 %
- Output Frequency (sync to mains): 47 - 63 Hz
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Other Output Voltages: 220
- Topology: Standby
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (2) F CEE 7 (Surge Protection), (6) F CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 47 - 63 Hz
- Input Connections: F CEE 7/7P
- Cord Length: 1.83meters
- Input voltage range for main operations: 180 - 266V
- Efficiency at Full Load: 80.0 %
- Maximum Input Current: 6.0A
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Expected Battery Life (years): 2 - 5
- Battery Volt-Amp-Hour Capacity: 75
Communications & Management
- Interface Port(s): USB
- Control panel: LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators, LED status display with On Line : On Battery : Replace Battery and Overload indicators
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
- Surge energy rating: 310Joules
- Data Line Protection: Analog phone line for phone/fax/modem/DSL (RJ-45 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Cold-start capable
Provides temporary battery power when the utility power is out.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Hot-swappable batteries
Ensures...

- Up to 700 W output power (cos =1.0)
- Highest protection for critical applications (e.g. Server/Workstation)
- 8 output sockets IEC320 C13, four of which can be controlled
- Integrates with network management systems
- Slot for optional interface cards
- Software for monitoring and shutdown
- Can be used as a rack or tower
The XANTO series continuous transformer technology completely decouples the loads from disturbances from the power supply network. Forward-looking DYNAMIC power TECHNOLOGY (DPT) guarantees that efficiency is combined with maximum safety. Data loss is effectively prevented while minimizing energy loss. The highest security level according to VFI-SS-111 is achieved.
Even extreme voltage fluctuations, harmonics and voltage peaks are prevented by the connected loads using XANTO UPS. On the voltage side, this means that no damage can be caused to the loads and maximum reliability is achieved. In order to increase performance and to establish redundancy, the models above 6kVA can be connected in parallel to the UPS systems. The system can be developed up to building management via separately available accessories such as SNMP adapters and relay cards as well as sensors. For example Room monitoring with switching of consumers according to temperature, humidity etc. possible.
Applications in this premium class are servers, switchgear, IT infrastructure as well as any sensitive applications in the industrial and data center.
- Dual-transducer technology for 100% decoupling of consumers
- Scalable bridging time with additional battery packs (not 700VA)
- Highest security level VFI-SS-111 according to IEC 62040-3
- Up to 98% efficiency: Low operating costs due to scaling output power
- RS-232 and USB interface & emergency stop interface
- Cold start function: Start the UPS system without input voltage
- Automatic bypass in case of overload, e.g. when switching on large loads
- Switchable output sockets for extending the bridging time for critical loads (not X6000, X10000)
- Tower or rack-tower combo models 2/4U depending on model
- Parallel function as standard for increased safety with redundancy (from 6kVA model)
- Slot for optional SNMP adapter or AS400/relay card (not for 20kVA)
- Integrated revision bypass (only on 20kVA models) for maximum comfort without downtime

- Up to 700 W output power (cos =1.0)
- Highest protection for critical applications (e.g. Server/Workstation)
- 4 output sockets IEC320 C13, two of which can be controlled
- Integrates with network management systems
- Slot for optional interface cards o Software for monitoring and shutdown
The XANTO series continuous transformer technology completely decouples the loads from disturbances from the power supply network. Forward-looking DYNAMIC power TECHNOLOGY (DPT) guarantees that efficiency is combined with maximum safety. Data loss is effectively prevented while minimizing energy loss. The highest security level according to VFI-SS-111 is achieved.
Even extreme voltage fluctuations, harmonics and voltage peaks are prevented by the connected loads using XANTO UPS. On the voltage side, this means that no damage can be caused to the loads and maximum reliability is achieved. In order to increase performance and to establish redundancy, the models above 6kVA can be connected in parallel to the UPS systems. The system can be developed up to building management via separately available accessories such as SNMP adapters and relay cards as well as sensors. For example Room monitoring with switching of consumers according to temperature, humidity etc. possible.
Applications in this premium class are servers, switchgear, IT infrastructure as well as any sensitive applications in the industrial and data center.
- Dual-transducer technology for 100% decoupling of consumers
- Scalable bridging time with additional battery packs (not 700VA)
- Highest security level VFI-SS-111 according to IEC 62040-3
- Up to 98% efficiency: Low operating costs due to scaling output power
- RS-232 and USB interface & emergency stop interface
- Cold start function: Start the UPS system without input voltage
- Automatic bypass in case of overload, e.g. when switching on large loads
- Switchable output sockets for extending the bridging time for critical loads (not X6000, X10000)
- Tower or rack-tower combo models 2/4U depending on model
- Parallel function as standard for increased safety with redundancy (from 6kVA model)
- Slot for optional SNMP adapter or AS400/relay card (not for 20kVA)
- Integrated revision bypass (only on 20kVA models) for maximum comfort without downtime

General Data:
- 700 VA / 420 W.
- 175 - 275 V.
- 5 min battery life at 70% load
- HID-compatible USB port
- Line-Interactive Technology
- Replaceable Batteries
- 3 cold appliance sockets with surge protection and backup
- 3 IEC outlets with surge protection only
- Automatic Battery Test
Ideal for protecting:
- Workstations
- Business Telephony
- Network Devices
- Point-of-sale equipment
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040 -3
- CB Report
- CE mark
The Eaton 5S UPS provides effective power protection, even in high-noise electrical environments. Voltage fluctuations are automatically compensated by a voltage regulator (AVR, booster/fader) without using the batteries.
The 5S is not only a battery backup that keeps your equipment up and running even in the event of power outages, but also provides effective protection against harmful surges.
The 5S also protects your network equipment against voltage spikes coming through the back door via Ethernet, Internet or telephone lines.
Your regular battery self-test warns early if a battery replacement is necessary.
The easy-to-replace batteries help to prolong UPS life.
The 5S can be installed vertically above, on or under a table, or horizontally under a screen. Its compact, thin form factor allows it to easily integrate into space-constrained environments.
Further technical details can be found in the data sheet.

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C14
Output:
- Output power capacity: 410 Watts / 750VA
- Output Connections: (4) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C14
Output:
- Output power capacity: 520 Watts / 950VA
- Output Connections: (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C14
Output:
- Output power capacity: 650 Watts / 1.2kVA
- Output Connections: (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C20
Output:
- Output power capacity: 1.2kWatts / 2.2kVA
- Output Connections: (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

High-performance UPS systems with double-conversion online technology and scalable autonomy time.
Input:
- Input connection type: IEC 60320 C20
- Nominal input voltage: 230 V
Output:
- Output power capacity: 1.98kWatt / 2.2kVA
- Output Connections: (8) IEC 60320 C13 (power failure protection) + (2) IEC 60320 C19 (power failure protection)
- Nominal output voltage: 230 V
Battery failure notification
Analyses for early detection of battery faults enable timely preventive maintenance
ECO mode
Operating mode that bypasses unneeded electrical components when power is properly supplied to allow efficient operation without compromising availability
LCD graphic display
Display of operating modes, system parameters and alarms in the form of text and overview schematics.
Combination rack/tower unit
Protects existing UPS investments when moving from a tower to a rack environment.

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Cold-start capable
Provides temporary battery power when the utility power is out.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Serial connectivity
Provides management of the UPS via a serial port.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Network manageable
Provides remote power management of the UPS over the network.

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C14
Output:
- Output power capacity: 900 Watts / 1.6kVA
- Output Connections: (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

Complete protection
- During a power outage, the Eaton 3S provides emergency power via the battery and advanced overvoltage protection to prevent damage from lightning strikes or mains surges.
- In the event of a power failure that lasts longer than expected, Eaton software will safely shut down your computer without losing data.
- To protect routers from interference over the data line, the Eaton 3S also includes RJ11/xDSL data line protection.
Modern application and easy integration
- The compact and attractive design with a high-gloss surface fits perfectly into any modern living or office environment.
- IEC outputs are available for professional use.
- To facilitate installation, a wall mounting system is implemented in all models.
Don't worry
- The surge protection complies with the international standard IEC 61643-11.
- The 10 A circuit breaker protects your equipment against overload.
Comprehensive protection for:
- Computers, peripherals and multimedia
- TV, video and hi-fi equipment: Home theater equipment, NAS, digital decoders, etc.
- Router
- Game consoles
- Broadband modems (Internet and TV) and IP telephones
- Housewares, etc.

- Energy Saving Technology
- Automatic Voltage Regulation (AVR)
- LCD Status Display
- High-speed Ethernet Data Transmission
Input
- Nominal Input Voltage ( Vac ): 230 ± 10%
- Input Voltage Range ( Vac ): 167 ~ 295
- Input Frequency ( Hz ): 50 ± 5 / 60 ± 5
- Rated Input Current ( A ): 3.04
- Input Connector Type: IEC C14
Output
- Capacity (VA): 700
- Capacity (Watts): 390
- On Battery Waveform: Simulated Sine Wave
- On Battery Voltage(s) ( Vac ): 230 ± 10%
- On Battery Frequency ( Hz ): 50 ± 1% / 60 ± 1%
- Automatic Voltage Regulation (AVR): Single Boost, Single Buck
- Overload Protection: Circuit Breaker
- Outlet(s) - Total: 4
- Outlet Type: Schutzkontakt x 4
- Outlet(s) - Battery & Surge Protected: 4
- Typical Transfer Time ( ms ): 4
CyberPower VP700ELCD offers home and office users a reliable battery backup and safeguards office PCs and other electronic devices from surges, spikes, brownouts and other power incidents.
Designed with GreenPower UPS™ Technology to improve operating efficiency and to minimize energy consumption, users can enjoy significant energy cost savings over conventional UPS systems.
The UPS provides Automatic Voltage Regulation (AVR) to maintain safe voltage for connected equipment.
The UPS provides multifunctional LCD readout to display clear power and battery conditions.
The product features data line protection with high-speed transmission to safeguard phones, network and communication equipment against surge/spike as well as supply 1Gbps speed to transmit data.
The UPS is also compatible with PowerPanel® Power Management Software to achieve real-time monitoring and configuration.
Package Content:
- VP700ELCD UPS
- USB Cable
- User's Manual
- Product Registration Card

Complete protection
- During a power outage, the Eaton 3S provides emergency power via the battery and advanced overvoltage protection to prevent damage from lightning strikes or mains surges.
- In the event of a power failure that lasts longer than expected, Eaton software will safely shut down your computer without losing data.
- To protect routers from interference over the data line, the Eaton 3S also includes RJ11/xDSL data line protection.
Modern application and easy integration
- The compact and attractive design with a high-gloss surface fits perfectly into any modern living or office environment.
- The Eaton 3S 700VA and 850VA models offer two 2A USB ports for charging any mobile device (mobile phone, tablet, etc...).
- To facilitate installation, a wall mounting system is implemented on all models.
Do not worry
- The surge protection complies with the international standard IEC 61643-11.
- The 10 A circuit breaker protects your equipment against overload.
Comprehensive protection for:
- Computers, peripherals and multimedia
- TV, video and hi-fi equipment: Home theater equipment, NAS, digital decoders, etc.
- Router
- Game consoles
- Broadband modems (Internet and TV) and IP telephones
- Housewares, etc.

Smart and efficient solution for uninterruptible power supply of network systems, selection from entry-level to models with scalable autonomy time.
Ideal UPS for servers, POS systems, routers, switches, hubs and other devices.
Input Connections
- 1x IEC 320 C14
Output connection type
- 8x IEC 320 C13
- 2x IEC jumpers
Advanced power protection for servers and network equipment
- Intuitive LCD user interface
- Display of battery replacement date
- Pure sinusoidal output signal in battery mode
- Battery failure notification
- Hot-swappable batteries
- Intelligent battery management
Automatic detection of external batteries
UPS system detects the connection of external battery modules and automatically updates the autonomy time.
Supports cold start
Allows temporary battery operation when the mains supply fails.
Energy consumption meter
Indication of usage in kilowatt hours for energy-conscious users.
EPO (Energy Power-Off)
The device can be connected to an EPO (Emergency Power Off) system so that it is automatically switched off in an emergency situation.
Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.
High Frequency Design
Reduces or eliminates the need for bulky transformers, making equipment lighter and easier to handle.
High on-line efficiency
Reduces power costs, generates less waste heat.
Intuitive LCD user interface
Easy-to-read interface with accurate information in multiple languages and support for on-site UPS configuration with user-friendly navigation buttons.
Group switchable outputs
Multiple output groups for separate control via the UPS system for targeted restart of unresponsive systems, sequential startup or shutdown of systems, or shutdown of non-critical loads.
External plug-and-play batteries
Ensures uninterrupted supply of clean power to connected equipment during installation of runtime extension modules.
Battery replacement date display
Dynamic display of recommended battery replacement date in month and year facilitates long-term maintenance planning.
Pure sinusoidal output signal in battery mode
Simulates mains power supply for the highest possible compatibility with servers and sensitive electronic systems with active power factor correction.
Combination Rack/Tower
Protects existing UPS investments when moving from a tower to a...

SMX Series Smart-UPS Rack/Tower 48.3cm (19''), 800W / 1000 VA
Inputs
- 1x IEC 320 C14
Outputs
- 8x IEC 320 C13
- 2x IEC jumpers
This product is part of the Smart-UPS series, an intelligent and efficient line power protection offering from entry-level to scalable runtime.
This high quality and reliable 1000 VA / 800 W line-interactive UPS offers pure sine wave and scalable runtimes for critical applications.
The convertible (rack/tower) 2U SMX UPS has the ability to integrate a network management card for network-based monitoring and PowerChute Business Edition for unattended shutdown...
Advanced power protection for servers and network equipment
- Intuitive LCD user interface
- Display of battery replacement date
- Pure sinusoidal output signal in battery mode
- Battery failure notification
- Hot-swappable batteries
- Intelligent battery management
Automatic detection of external batteries
UPS system detects the connection of external battery modules and automatically updates the autonomy time.
Supports cold start
- Allows temporary battery operation when the mains supply fails
- Energy consumption meter
- Indication of usage in kilowatt hours for energy-conscious users.
- EPO (Energy Power-Off)
The instrument can be connected to an EPO (Emergency Power Off) system so that it is automatically switched off in an emergency situation.
Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.
High frequency design
Reduces or eliminates the need for bulky transformers, making equipment lighter and easier to handle.
High online efficiency
- Reduces power costs, generates less waste heat
- Intuitive LCD user interface
Easy-to-read interface with accurate information in multiple languages and support for on-site UPS configuration with user-friendly navigation buttons.
Group switchable outputs
Multiple output groups for separate control via the UPS system for targeted restart of unresponsive systems, sequential startup or shutdown of systems, or shutdown of non-critical loads.
External plug-and-play batteries
Ensures uninterrupted supply of clean power to connected equipment during installation of runtime extension modules.
Battery replacement date display
Dynamic display of recommended battery replacement date in month and year facilitates long-term maintenance planning.
Pure...

- Energy Saving Technology
- Automatic Voltage Regulation (AVR)
- LCD Status Display
- High-speed Ethernet Data Transmission
Input
- Nominal Input Voltage ( Vac ): 230 ± 10%
- Input Voltage Range ( Vac ): 167 ~ 295
- Input Frequency ( Hz ): 50 ± 5 / 60 ± 5
- Rated Input Current ( A ): 3.04
- Input Connector Type: IEC C14
Output
- Capacity (VA): 700
- Capacity (Watts): 390
- On Battery Waveform: Simulated Sine Wave
- On Battery Voltage(s) ( Vac ): 230 ± 10%
- On Battery Frequency ( Hz ): 50 ± 1% / 60 ± 1%
- Automatic Voltage Regulation (AVR): Single Boost, Single Buck
- Overload Protection: Circuit Breaker
- Outlet(s) - Total: 6
- Outlet Type: IEC C13 x 6
- Outlet(s) - Battery & Surge Protected: 6
- Typical Transfer Time ( ms ): 4
CyberPower VP700EILCD offers home and office users a reliable battery backup and safeguards office PCs and other electronic devices from surges, spikes, brownouts and other power incidents.
Designed with GreenPower UPS™ Technology to improve operating efficiency and to minimize energy consumption, users can enjoy significant energy cost savings over conventional UPS systems.
The UPS provides Automatic Voltage Regulation (AVR) to maintain safe voltage for connected equipment.
The UPS provides multifunctional LCD readout to display clear power and battery conditions.
The product features data line protection with high-speed transmission to safeguard phones, network and communication equipment against surge/spike as well as supply 1Gbps speed to transmit data.
The UPS is also compatible with PowerPanel® Power Management Software to achieve real-time monitoring and configuration.
Package Content:
- VP700EILCD UPS
- Power Cord
- USB Cable
- User's Manual
- Product Registration Card

- Technology: Off-line
- Design: Flexible basic design
Input
- Nominal voltage: 230 V
- Voltage tolerance: 180 - 270 V
- Nominal frequency: 50 / 60 Hz (automatic detection)
- Automatic detection frequency: Yes
- Protection: Resettable thermal switch
Output
- 4x protective contact (protection + UPS)
- 2x protective contact (protection only)
- 2x RJ45 for telephone / fax (10/100)
- Nominal voltage: 230 V
- Precision voltage (battery mode): ±7%
- Power (VA/W): 650 / 360
- Waveform (battery mode): pseudosinusoidal
- Frequency: 50 / 60 Hz (corresponds to input)
- Precision frequency (battery mode): ±1Hz
- Transmission time: 4 ms (typical)
- Compatible with APFC loads: yes
Ideal multi-plug solution for office and home environments
Salicru's SPS HOME series uninterruptible power supplies (UPS) with offline technology have a flexible basic design with 6 outlets and capacity to protect loads with power correction factor (APFC).
User-friendly and compatible
All sockets are aligned to conveniently connect supply transformers, and feature contact protection via orifice plates.
To complete the protection, they also have RJ45 jacks for telephone line/ADSL/Ethernet protection against power surges and/or electrical noise.
Management via USB
And to allow the management and control of the UPS, the USB interface embeds the HID protocol that allows the configuration of parameters and the controlled shutdown/standby of the computer.
Also there is the option of software packages for monitoring and controlled closing of files for Windows, Linux and Mac.
Batteries
- Battery type: Pb-Ca sealed, AGM, maintenance free
- Charge time: 8 hours to 90%
- Battery can be replaced by user: Yes
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN 62040-2
- Operation: EN 62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

The Conceptronic UPS offers long-lasting, reliable emergency power supply for small and home offices. The device features straightforward installation and operation, providing a simple and safe way to protect your systems from dangerous surges and power outages. The UPS is equipped with modem/LAN protection, a powerful microprocessor and a fault indicator that warns of dangerous wiring. Thanks to its elegant, compact design, the UPS is ideal for the limited workspace in small and home offices.
Technical specifications
- UPS topology: Standby (offline)
- Output capacity: 0.65 kVA
- Output power: 360 W
- Input operating voltage (min): 220 V
- Input operating voltage (max): 240 V
- Output operating voltage (min): 220 V
- Output operating voltage (max): 240 V
- Audible signals: Yes
- Audible alarm modes: Alarm on battery operation, fault, low battery warning, overload alarm
- Auto restart: Yes
- AC plug types: Type F
- Number of AC outputs: 6
- Battery charging time (90 %): 8 h
- Form factor: Compact
- Product color: Black
- LED indicators: Yes
- Operating temperature: 0 - 40 °C
- Operating relative humidity: 10 - 90%
- Width: 110 mm
- Depth: 309 mm
- Height: 84 mm
- Weight: 2.76 kg
- Quick installation guide

The dual-mode connectivity incorporates a 2.4GHz wireless and a Bluetooth 5.0 connection so you can pair and connect to almost any PC via your preferred mode.
Easy Pairing
Pair your mouse to your Windows laptop via Bluetooth instantly using Microsoft Swift Pair, so you do not need to configure in Windows settings every time. This mouse is also compatible with a variety of operating systems, including Windows, Mac, Chrome, Linux and Android.
Built to last
Work for up to 36 months on a single battery — that's three times longer than previous-generation models — and forget about having to recharge daily, weekly or even monthly. This lets you get on with your tasks smoothly without having to be concerned with battery replacements.
Simply reliable
Should your mouse be faulty within the three-year warranty, Dell’s Advanced Exchange Service ships you a replacement unit the next business day. Rigorous testing across Dell systems ensures your mouse is fully reliable and primed, making deployment easier across hundreds of Dell systems.
Precise tracking
A 1600 DPI sensor ensures this Dell Mobile Pro Wireless Mouse - MS5120W handles high-resolution screens easily. Its optical sensor offers accurate tracking and is ideal on most desk surfaces.
Quick access
Intuitively positioned shortcut buttons allow easy navigation across web pages and applications. Browse back and forth efficiently between pages onscreen effortlessly.
Simple Management
The Dell Peripheral Manager lets you customize and manage your keyboards and mice. Pair your devices, program shortcut buttons for quick access to your preferred applications and functions, and get battery and connectivity status and the latest firmware updates — whatever suits your business needs.

The Nano UPS provides comprehensive protection in a compressed and efficient form.
The Nano UPS is compact and offers comprehensive protection against power failure or power peaks.
With Nano the power supply can be continued reliably, a safe shutdown of your pc during a power failure is possible.
The integrated microprocessor control guarantees high reliability.
Output:
- Slots: 2 x protective contact
- Voltage: 220 V nominal
- Frequency: 50 / 60 Hz
- Transfer time: typically 2-6 ms
- Curve progression (Batt. mode): Simulated sine wave
- Battery: 12 V / 7 AH x 1
Input:
- Slots: 1x IEC C14
- Input voltage: 180 ~ 270 V AC
- Frequency: 50 / 60 Hz
Characteristics:
- Compact size with stand and mounting flexibility
- Excellent microprocessor control guarantees high reliability
- Automatic restart during AC recovery
- Simulated sinusoidal curve
- cold start function
- Complete protection: discharge, overcharge, short circuit and thermal protection