APC BV500I - Easy-UPS BV UPS 500VA / 300W
85.35 EUR
Access the complete sheet with information, compare prices and identify the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it inserts into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
"APC EASY UPS BV 500VA, AVR, IEC Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
Input
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access...
EAN: 0731304338260
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"APC EASY UPS BV 500VA, AVR, IEC Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 300Watts / 500VA
- Max Configurable Power (Watts): 300Watts / 500VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access...
EAN: 0731304338260
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 300Watts / 500VA
- Max Configurable Power (Watts): 300Watts / 500VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours...
Battery Backup & Surge Protector for Electronics and Computers
Output
- Output power capacity: 300Watts / 500VA
- Max Configurable Power (Watts): 300Watts / 500VA
- Nominal Output Voltage: 230V
- Output Frequency (sync to mains): 47 - 63 Hz
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Standby
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (1) IEC 320 C13 + (2) IEC Jumpers + (3) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 47 - 63 Hz, 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320-C14 inlet
- Input voltage range for main operations: 180 - 266V
- Input voltage adjustable range for mains operation: 160 - 300V
- Number of Power Cords: 2
- Maximum Input Current: 7.0A
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Approvals
C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE
Direct service!
• Free customer hotline: 0800 101 00 67"
Smart and efficient solution for uninterruptible power supply of network systems, selection from entry-level to models with scalable autonomy time.
Ideal UPS for servers, POS systems, routers, switches, hubs and other devices.
Input Connections
- 1x IEC 320 C14
Output connection type
- 8x IEC 320 C13
- 2x IEC jumpers
Advanced power protection for servers and network equipment
- Intuitive LCD user interface
- Display of battery replacement date
- Pure sinusoidal output signal in battery mode
- Battery failure notification
- Hot-swappable batteries
- Intelligent battery management
Automatic detection of external batteries
UPS system detects the connection of external battery modules and automatically updates the autonomy time.
Supports cold start
Allows temporary battery operation when the mains supply fails.
Energy consumption meter
Indication of usage in kilowatt hours for energy-conscious users.
EPO (Energy Power-Off)
The device can be connected to an EPO (Emergency Power Off) system so that it is automatically switched off in an emergency situation.
Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.
High Frequency Design
Reduces or eliminates the need for bulky transformers, making equipment lighter and easier to handle.
High on-line efficiency
Reduces power costs, generates less waste heat.
Intuitive LCD user interface
Easy-to-read interface with accurate information in multiple languages and support for on-site UPS configuration with user-friendly navigation buttons.
Group switchable outputs
Multiple output groups for separate control via the UPS system for targeted restart of unresponsive systems, sequential startup or shutdown of systems, or shutdown of non-critical loads.
External plug-and-play batteries
Ensures uninterrupted supply of clean power to connected equipment during installation of runtime extension modules.
Battery replacement date display
Dynamic display of recommended battery replacement date in month and year facilitates long-term maintenance planning.
Pure sinusoidal output signal in battery mode
Simulates mains power supply for the highest possible compatibility with servers and sensitive electronic systems with active power factor correction.
Combination Rack/Tower
Protects existing UPS investments when moving from a tower to a...
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Cold-start capable
Provides temporary battery power when the utility power is out.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Serial connectivity
Provides management of the UPS via a serial port.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Network manageable
Provides remote power management of the UPS over the network.
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 375Watts / 650VA
- Max Configurable Power (Watts): 375Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access...
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 450Watts / 800VA
- Max Configurable Power (Watts): 450Watts / 800VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access...
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 600Watts / 1.0kVA
- Max Configurable Power (Watts): 600Watts / 1.0kVA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a...
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 450Watts / 800VA
- Max Configurable Power (Watts): 450Watts / 800VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical / 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices,...
132.95 EUR "APC EASY UPS BV 1000VA, AVR, Schutzkontakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 600Watts / 1.0kVA
- Max Configurable Power (Watts): 600Watts / 1.0kVA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for...
110.83 EUR "APC EASY UPS BV 650VA, AVR, Schutzkonakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 375Watts / 650VA
- Max Configurable Power (Watts): 375Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for...
- Technology: Line - interactive
- Design: tower
Input
- Nominal voltage: 230 V
- Voltage tolerance: 162 - 290 V
- Stabilizer: AVR (Buck & Boost)
- Nominal frequency: 50 / 60 Hz (automatic detection)
- Automatic Detection Frequency: Yes
- Protection: Resettable thermal switch
Output
- 2x safety contact
- 2x USB
- Nominal voltage: 230 V
- Precision voltage (battery mode): ±10%
- Power (VA/W): 500 / 300
- Power (VA): 500
- Waveform (battery mode): pseudosinusoidal
- Frequency: 50 / 60 Hz (automatic detection)
- Precision frequency (battery mode): ±1Hz
- Compatible with APFC loads: yes
Optimal electrical protection for office environments and office systems
Salicru's SPS SOHO+ series of uninterruptible power supplies (UPS/UPS) offer Line-Interactive technology, compatibility with Active Power Factor Correction (APFC) loads, and a dual front-panel USB charger as their most notable benefits
The Line-Interactive technology is based on an automatic AVR voltage regulator (buck/boost).
This reduces any fluctuations in the input voltage and at the same time causes less use of the batteries, thus extending their life.
Therefore, the UPS has maximum autonomy in case of need.
In addition, this series counts on a USB interface with HID protocol for control, configuration of parameters and for controlled shutdown/standby of the computer.
Also available is a software package for monitoring and managing the assigned environments, including for virtual systems.
Batteries
- Protection: against deep discharge, against short circuit by fuse
- Battery type: Pb-Ca sealed, AGM, maintenance free
- Charge time: 2 - 4 hours to 90%
Communication
- Ports: USB (HID protocol)
- Monitoring software: For Windows, Linux and Mac
Other features
- Cold startup (boot up using batteries): yes
- Automatic restart: Yes, after the backup time of the battery is over
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN-62040-2
- Operation: EN-62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 6x IEC C13
- 230 V AC
- 1200 VA / 650 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off."
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 4x IEC C13
- 230 V AC
- 700 VA / 360 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off."
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 2x Earthed socket outlet
- 230 V AC
- 700 VA / 360 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off."
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 1200 VA / 650 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off."
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C20
- 220 - 240 V AC
Output:
- 6x IEC C14
- 230 V AC
- 2200 VA / 1200 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off."
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C13
- 220 - 240 V AC
Output:
- 6x IEC C14
- 230 V AC
- 1600 VA / 900 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off."
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 2200 VA / 1200 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off."
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 1600 VA / 900 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off."
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 2x Earthed socket outlet
- 230 V AC
- 900 VA / 480 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off."
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 4x IEC C13
- 230 V AC
- 900 VA / 480 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off."
The UPS has a USB interface, which guarantees together with the standard shutdown, monitoring and management software DataWatch proper and safe shutdown.
New to YUNTO is the increased performance with up to 1500VA. In addition, now all YUNTO models offer the practical, integrated in the housing wall bracket.
ONLINE UPS systems warrants all YUNTO models 2 years warranty incl. Battery and a 24-hour advance replacement.
- Line interactive technology with simulated sinusoidal output voltage
- noiseless
- Compact design, only 80 x 178 x 232mm
- Intelligent battery management, self-testing and quick-charging function
- Surge protection for data and phone lines
- alarm function
- USB interface
- Includes shutdown, management and monitoring software Data Watch for all operating systems (WIN, LINUX, UNIX, MAC, etc.)
- Integrated, practical wall mount
- With soldering iron and hot air pump
- Suitable for soldering and desoldering SMD components
- Temperature displayed in °C and °F
- The temperature is easy to adjust (up/down keys)
- Calibration from 3 l/min to 24 l/min
- Microprocessor-controlled temperature
- Practical rubber handle (non-flammable)
Technical data
Power consumption:
Soldering iron: 24 V, 60 W
Hot air: 300 W
Power supply: 220 - 240 VAC 50 Hz
Temperature range:
Soldering iron: 50 - 480°C
Hot air pump: 100 - 500°C
Dimensions: 113 x 125 x 175 mm
Weight: 2 kg"
