APC APSMT1500RMI2UNC - Smart-UPS, 1500VA, LCD RM 2U NC, 230V

APCSMT3000RMI2UC - Smart-UPS, 3000VA, LCD RM 2U, 230V 2879.3 EUR APC Smart-UPS 3000VA LCD RM 2U 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

• Output power capacity: 2.7kWatts / 3.0kVA
• Max Configurable Power (Watts): 2.7kWatts / 3.0kVA
• Nominal Output Voltage: 230V
• Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion: Less than 5%
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Other Output Voltages: 220, 240
• Topology: Line Interactive
• Waveform type: Sine wave
• Output Connections: (3) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup), (1) IEC 320 C19 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: British BS1363A, IEC-320 C20, Schutzkontakt CEE 7/EU1-16P
• Cord Length: 2meters
• Input voltage range for main operations: 160 - 286V
• Input voltage adjustable range for mains operation: 151 - 302V
• Number of Power Cords: 1
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 3hour(s)
• Replacement Battery: RBC43
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1

Communications & Management

• Interface Port(s): RJ-45 Serial, SmartSlot, USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Available SmartSlot™ Interface Quantity: 1

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates...

SEE OFFER SEE OFFER ebay

APCSMT2200RMI2UC - Smart-UPS, 2200VA, LCD RM 2U, 230V 2311.84 EUR APC Smart-UPS 2200VA LCD RM 2U 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

• Output power capacity: 1.98kWatts / 2.2kVA
• Max Configurable Power (Watts): 1.98kWatts / 2.2kVA
• Nominal Output Voltage: 230V
• Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion: Less than 5%
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Other Output Voltages: 220, 240
• Topology: Line Interactive
• Waveform type: Sine wave
• Output Connections: (8) IEC 320 C13 (Battery Backup), (1) IEC 320 C19 (Battery Backup), (3) IEC Jumpers (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: British BS1363A, IEC-320 C20, Schutzkontakt CEE 7/EU1-16P
• Cord Length: 2meters
• Input voltage range for main operations: 160 - 286V
• Input voltage adjustable range for mains operation: 151 - 302V
• Number of Power Cords: 1
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 3hour(s)
• Replacement Battery: RBC43
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1

Communications & Management

• Interface Port(s): RJ-45 Serial, SmartSlot, USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Available SmartSlot™ Interface Quantity: 1

Cold-start capable
Provides temporary battery power when the utility power is out.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency
Reduces utility costs, generates less heat.

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Pure sine wave output on battery
Simulates utility power to...

SEE OFFER SEE OFFER ebay

APC SMT1000IC - Smart-UPS 1000VA LCD 230V 689.75 EUR APC Smart-UPS 1000VA LCD 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

• Output power capacity: 700Watts / 1.0 kVA
• Max Configurable Power (Watts): 700Watts / 1.0 kVA
• Nominal Output Voltage: 230V
• Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion: Less than 5%
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Other Output Voltages: 220, 240
• Topology: Line Interactive
• Waveform type: Sine wave
• Output Connections: 8x IEC 320 C13 (Battery Backup), 2x IEC Jumpers (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 160 - 286V
• Input voltage adjustable range for mains operation: 151 - 302V
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 3hour(s)
• Replacement Battery: RBC6
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1

Communications & Management

• Interface Port(s): SmartSlot , USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
• Emergency Power Off (EPO): Optional
• Available SmartSlot™ Interface Quantity: 1

Regulatory:
CE, Querschnitt, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, UL 1778, VDE

SEE OFFER SEE OFFER ebay

APC SMT3000IC - Smart-UPS, 3000VA, LCD, 230V 2362.5 EUR APC Smart-UPS 3000VA LCD 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

• Output power capacity: 2.7kWatts / 3.0kVA
• Max Configurable Power (Watts): 2.7kWatts / 3.0kVA
• Nominal Output Voltage: 230V
• Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion: Less than 5%
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Other Output Voltages: 220, 240
• Topology: Line Interactive
• Waveform type: Sine wave
• Output Connections: (1) IEC 320 C19 (Battery Backup), (2) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C20, Schutzkontakt CEE 7 / EU1-16P, British BS1363A
• Input voltage range for main operations: 160 - 286V
• Input voltage adjustable range for mains operation: 151 - 302V
• Number of Power Cords: 1
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 3hour(s)
• Replacement Battery: RBC55
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1
• Extendable Run Time: 1

Communications & Management

• Interface Port(s): SmartSlot, USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Emergency Power Off (EPO): Yes
• Available SmartSlot™ Interface Quantity: 1

Cold-start capable
Provides temporary battery power when the utility power is out.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency
Reduces utility costs, generates less heat.

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Pure sine wave output on battery<...

SEE OFFER SEE OFFER ebay

APC BR1600SI - Back UPS Pro BR, 1600VA, LCD, 230V 666.08 EUR Back UPS Pro BR 1600VA, Sinewave,8 Outlets, AVR, LCD interface
High Performance Computer and Electronics UPS for Premium Power Protection

Technical Specifications

Output

• Output power capacity: 960Watts / 1.6kVA
• Max Configurable Power (Watts): 960Watts / 1.6kVA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Output Connections: (6) IEC 320 C13 (Battery Backup), (2) IEC 320 C13 (Surge Protection)

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 176 - 294V
• Maximum Input Current: 10.0A

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 16hour(s)
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1
• Battery Volt-Amp-Hour Capacity: 260

Communications & Management

• Interface Port(s): USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable
Provides temporary battery power when the utility power is out.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

LCD graphics display
Text and mimic diagrams that display modes of operation,...

SEE OFFER SEE OFFER ebay

APC BR1600MI - Back-UPS Pro, 1600VA, LCD, 230 V 552.38 EUR Back UPS Pro BR 1600VA, 8 Outlets, AVR, LCD Interface

High Performance Computer and Electronics UPS for Premium Power Protection

Output

• Output power capacity: 960Watts / 1.6kVA
• Max Configurable Power (Watts): 960Watts / 1.6kVA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Output Connections: (6) IEC 320 C13 (Battery Backup), (2) IEC 320 C13

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 176 - 294V
• Maximum Input Current: 10.0A

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 16hour(s)
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1
• Battery Volt-Amp-Hour Capacity: 180

Communications & Management

• Interface Port(s): USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

• Surge energy rating: 509Joules
• Data Line Protection: RJ45 10/100/1000 Base-T Ethernet protection
• Filtering: Full time multi-pole noise filtering :10% of IEEE surge let-through : zero clamping response time: instantaneous

Includes:

• USB cable
• User Manual

SEE OFFER SEE OFFER ebay

APC BR900MI - Back-UPS Pro, 900VA, LCD, 230 V 304.38 EUR Back UPS Pro BR 900VA, 6 Outlets, AVR, LCD Interface
High Performance Computer and Electronics UPS for Premium Power Protection

Output

• Output power capacity: 540Watts / 900VA
• Max Configurable Power (Watts): 540Watts / 900VA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (6) IEC 320 C13 (Battery Backup)
• Transfer Time: 10ms typical : 12ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 176 - 294V
• Maximum Input Current: 10.0A

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 12hour(s)
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1
• Battery Volt-Amp-Hour Capacity: 128

Communications & Management

• Interface Port(s): USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

• Data Line Protection: Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)
• Filtering: Full time multi-pole noise filtering :10% of IEEE surge let-through : zero clamping response time: instantaneous

Includes:

• USB cable
• User Manual

SEE OFFER SEE OFFER ebay

APC BR650MI - Back-UPS Pro, 650VA, LCD, 230 V 237.29 EUR Back UPS Pro BR 650VA, 6 Outlets, AVR, LCD Interface

High Performance Computer and Electronics UPS for Premium Power Protection

Output

• Output power capacity: 390Watts / 650VA
• Max Configurable Power (Watts): 390Watts / 650VA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (6) IEC 320 C13 (Battery Backup)
• Transfer Time: 10ms typical : 12ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 176 - 294V
• Maximum Input Current: 10.0A

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 12hour(s)
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1
• Battery Volt-Amp-Hour Capacity: 75

Communications & Management

• Interface Port(s): USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Includes:

• USB cable
• User Manual

SEE OFFER SEE OFFER ebay

APC SC450RMI1U - Smart-UPS, SC450VA, 1U, 230V 428.39 EUR APC Smart-UPS SC 450VA 230V - 1U Rackmount/Tower

APC Smart-UPS SC is ideal for small and medium businesses looking to protect networking equipment and point-of-sale (POS) devices from power disturbances and outages. The Smart-UPS SC features network grade protection, hot swap batteries, and built-in data line protection for worry free uninterruptible power protection for increased availability. Built on the same standards as the award-winning Smart-UPS, Smart-UPS SC provides the basic features and manageability needed to protect entry-level applications

Output

• Output power capacity: 280Watts / 450VA
• Max Configurable Power (Watts): 280Watts / 450VA
• Nominal Output Voltage: 230V
• Output Voltage Distortion: Less than 5% at full load
• Output Frequency (sync to mains): 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (2) IEC Jumpers (Battery Backup), (4) IEC 320 C13 (Battery Backup)
• Transfer Time: 4ms typical : 8ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 195 - 265V
• Input voltage adjustable range for mains operation: 151 - 302V

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 5hour(s)
• Replacement Battery: RBC18
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1

Communications & Management

• Interface Port(s): DB-9 RS-232
• Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
• Emergency Power Off (EPO): Optional

Front-access servicing
Simplifies installation and UPS maintenance while minimizing space requirements.

Multiple mounting methods
Allows for standardization on one product for use in different environments.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Lieferumfang:

• CD with software
• Rack Mounting Brackets
• Smart UPS signalling RS-232 cable
• User Manual

SEE OFFER SEE OFFER ebay

APC SMX1000I - Smart SMX 1000I LCD UPS-800Watt-1000VA 1051.55 EUR APC Smart-UPS X, 1000 VA, Rack / Tower LCD, 230 V

SMX Series Smart-UPS Rack/Tower 48.3cm (19''), 800W / 1000 VA
Inputs

• 1x IEC 320 C14

Outputs

• 8x IEC 320 C13
• 2x IEC jumpers

This product is part of the Smart-UPS series, an intelligent and efficient line power protection offering from entry-level to scalable runtime.
This high quality and reliable 1000 VA / 800 W line-interactive UPS offers pure sine wave and scalable runtimes for critical applications.
The convertible (rack/tower) 2U SMX UPS has the ability to integrate a network management card for network-based monitoring and PowerChute Business Edition for unattended shutdown...

Advanced power protection for servers and network equipment

• Intuitive LCD user interface
• Display of battery replacement date
• Pure sinusoidal output signal in battery mode
• Battery failure notification
• Hot-swappable batteries
• Intelligent battery management

Automatic detection of external batteries
UPS system detects the connection of external battery modules and automatically updates the autonomy time.

Supports cold start

• Allows temporary battery operation when the mains supply fails
• Energy consumption meter
• Indication of usage in kilowatt hours for energy-conscious users.
• EPO (Energy Power-Off)

The instrument can be connected to an EPO (Emergency Power Off) system so that it is automatically switched off in an emergency situation.

Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.

High frequency design
Reduces or eliminates the need for bulky transformers, making equipment lighter and easier to handle.

High online efficiency

• Reduces power costs, generates less waste heat
• Intuitive LCD user interface

Easy-to-read interface with accurate information in multiple languages and support for on-site UPS configuration with user-friendly navigation buttons.

Group switchable outputs
Multiple output groups for separate control via the UPS system for targeted restart of unresponsive systems, sequential startup or shutdown of systems, or shutdown of non-critical loads.

External plug-and-play batteries
Ensures uninterrupted supply of clean power to connected equipment during installation of runtime extension modules.

Battery replacement date display
Dynamic display of recommended battery replacement date in month and year facilitates long-term maintenance planning.

Pure...

SEE OFFER SEE OFFER ebay

APC SMX750I - Smart SMX 750I LCD UPS - 500Watt- 750VA 534.75 EUR SMX Series Smart UPS Rack/Tower 48.3cm (19''), 500W / 750 VA

Smart and efficient solution for uninterruptible power supply of network systems, selection from entry-level to models with scalable autonomy time.
Ideal UPS for servers, POS systems, routers, switches, hubs and other devices.

Input Connections

• 1x IEC 320 C14

Output connection type

• 8x IEC 320 C13
• 2x IEC jumpers

Advanced power protection for servers and network equipment

• Intuitive LCD user interface
• Display of battery replacement date
• Pure sinusoidal output signal in battery mode
• Battery failure notification
• Hot-swappable batteries
• Intelligent battery management

Automatic detection of external batteries
UPS system detects the connection of external battery modules and automatically updates the autonomy time.

Supports cold start
Allows temporary battery operation when the mains supply fails.

Energy consumption meter
Indication of usage in kilowatt hours for energy-conscious users.

EPO (Energy Power-Off)
The device can be connected to an EPO (Emergency Power Off) system so that it is automatically switched off in an emergency situation.

Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.

High Frequency Design
Reduces or eliminates the need for bulky transformers, making equipment lighter and easier to handle.

High on-line efficiency
Reduces power costs, generates less waste heat.

Intuitive LCD user interface
Easy-to-read interface with accurate information in multiple languages and support for on-site UPS configuration with user-friendly navigation buttons.

Group switchable outputs
Multiple output groups for separate control via the UPS system for targeted restart of unresponsive systems, sequential startup or shutdown of systems, or shutdown of non-critical loads.

External plug-and-play batteries
Ensures uninterrupted supply of clean power to connected equipment during installation of runtime extension modules.

Battery replacement date display
Dynamic display of recommended battery replacement date in month and year facilitates long-term maintenance planning.

Pure sinusoidal output signal in battery mode
Simulates mains power supply for the highest possible compatibility with servers and sensitive electronic systems with active power factor correction.

Combination Rack/Tower
Protects existing UPS investments when moving from a tower to a...

SEE OFFER SEE OFFER ebay

APC SMT750IC - Smart UPS 750VA / 500W 531.65 EUR APC Smart-UPS 750VA LCD 230V with SmartConnect
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Cold-start capable
Provides temporary battery power when the utility power is out.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency
Reduces utility costs, generates less heat.

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Serial connectivity
Provides management of the UPS via a serial port.

Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

LED status indicators
Quickly understand unit and power status with visual indicators.

Network manageable
Provides remote power management of the UPS over the network.

SEE OFFER SEE OFFER ebay

APC SRT3000RMXLN - Smart-UPS 3000 VA / 2700 W 4570.84 EUR APC Smart-UPS SRT, 3000 VA, rackmount, 230 V, network card

High-performance UPS systems with double-conversion online technology and scalable autonomy time

Input

• Input connection type: IEC 60320 C20
• Nominal input voltage: 230 V

Output

• Output power capacity: 2.7kWatt / 3.0kVA
• Output Connections: (8) IEC 60320 C13 (power failure protection) + (2) IEC 60320 C19 (power failure protection)
• Nominal output voltage: 230 V

Battery failure notification
Analyses for early detection of battery faults enable timely preventive maintenance

ECO mode
Operating mode in which unneeded electrical components are bypassed when power is properly supplied to allow efficient operation without compromising availability

Green operating mode
Patent-pending operating mode in which unused electrical components are shut down when power conditions are good, allowing very high operating efficiency without sacrificing safety.

LCD graphic display
Display of operating modes, system parameters and alarms in the form of text and overview diagrams.

Combination Rack/Tower
Protects existing UPS investments when moving from a tower to a rack environment.

SEE OFFER SEE OFFER ebay

APC SRT2200RMXLN - Smart-UPS 2200 VA / 1980 W 3067.06 EUR APC Smart-UPS SRT, 2200 VA, rackmount, 230 V, network card

High-performance UPS systems with double-conversion online technology and scalable autonomy time.

Input:

• Input connection type: IEC 60320 C20
• Nominal input voltage: 230 V

Output:

• Output power capacity: 1.98kWatt / 2.2kVA
• Output Connections: (8) IEC 60320 C13 (power failure protection) + (2) IEC 60320 C19 (power failure protection)
• Nominal output voltage: 230 V

Battery failure notification
Analyses for early detection of battery faults enable timely preventive maintenance

ECO mode
Operating mode that bypasses unneeded electrical components when power is properly supplied to allow efficient operation without compromising availability

LCD graphic display
Display of operating modes, system parameters and alarms in the form of text and overview schematics.

Combination rack/tower unit
Protects existing UPS investments when moving from a tower to a rack environment.

SEE OFFER SEE OFFER ebay

FREI APC RBC 7 - RBC 7 replacement battery 175.94 EUR Compatible replacement battery for
APC Back-UPS Pro 1400 VA
APC Smart-UPS 700XL , 1400 VA , 1000 VA XL , 700 VA XL , 1500 VA , 750 VA XL USB & serial
APC Smart-UPS v/s 1400 VA

SEE OFFER SEE OFFER ebay

FREI APC RBC 9 - Replacement battery 84.36 EUR APC Compatible Replacement Battery

Suitable for:
APC Smart-UPS RM 700VA Only for

• SU700RMNET
• SU700RM

SEE OFFER SEE OFFER ebay

FREI APC RBC 11 - Replacement battery (2-piece) 255.63 EUR APC Compatible Replacement Battery

Suitable for:
APC Smart-UPS

• 3000UXINET
• 2200VA XL
• 1400VA XL
• 3000
• 1400
• 48BP
• 48XLBP
• 1000RM
• 1250

APC Smart-UPS RM 3000VA Only for:

• SU3000RMNET
• SU3000RMINET
• SU3000RMINET-2EW
• SU3000RMINET-3EW
• SU3000RMINET-1EW
• SU3000RMNET-1EW

APC Smart-UPS RM 2200VA Only for:

• SU2200RM
• SU2200RMNET

APC Smart-UPS RM 1400VA XL Only for:

• SU1400RMXLNET
• SU1400RMXLTNET

APC Smart-UPS RM 2200VA XL Only for:

• SU2200RMXLNET
• SU2200RMXLTNET
• SU2200RMXLTX153
• SU2200RMXL
• SU2200RMXLINET-1EW
• SU2200RMXLINET-2EW
• SU2200RMXLINET-3EW

APC Smart-UPS RM 3000VA Shipboard Only for:

• SU3000RMX93

Note: complete kit (2x batteries)

SEE OFFER SEE OFFER ebay

FREI APC RBC 8 - RBC 8 replacement battery 133.76 EUR Compatible replacement battery for
APC Smart-UPS RM 1400 VA only for SU1400RMNET, SU1400RMBX120, SU1400RM, SU1400RMX176, SU1400RMBX135

SEE OFFER SEE OFFER ebay

VAL MS0110 - VA-LABs TrueRMS Digital Multimeter, 4000 Counts, 600 V, 10 A, NC 31.97 EUR The True RMS (TRMS) digital multimeter MS0110 with automatic range selection and its 4000 counts LCD enables the most important measurement functions as AC/DC voltage and current measurement up to 600 V / 10 A as well as resistance measurement up to 40 MOhm. Further the CAT III multimeter is equipped with diverse special functions as a non contact voltage detection (NCV), continuity test, diode function and battery test. The integrated LED working light enables the user additional the measurement with the multimeter in bad illuminated environments.

Features:

• display range: 4000 counts, with backlight
• TrueRMS (TRMS) measuement
• range selection: auto range
• voltage measuement up to 600 V AC/DC
• current measuement up to 10 A AC/DC
• resistance measuement up to 40 MOhm
• integrated LED working light for bad illuminated environments
• non contact voltage detection (NCV) with acustic and led alarm
• battery test function (1.5 V / 9 V)
• continuity and diode test
• data hold and maximum value function
• auto power off and low battery indication
• safety: CAT III 600 V, EN61010-1

scope of delivery:
MS0110 digital multimeter, test leads, manual, battery

SEE OFFER SEE OFFER ebay