ALAN 42DS - CB hand-held device
144.27 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the production is done by MANUFACTURER NAME and the sale is managed by SELLER NAME.
"The versatile Alan 42 DS comes with a wide range of accessories for every application.
New: Digital squelch makes the Alan 42 DS particularly convenient top operate, and guarantees optimum reception sensitivity at all times.
By switching the country standard, the device can be used in any European country.
The extensive range of accessories for the Alan 42 DS allows the device to be used in different scenarios. Two exchangeable battery compartments are included for portable operation with rechargeable or alkaline batteries. These can be easily exchanged for the on-board power adapter with a 12-V cigarette lighter connection for mobile use in the car. External CB antennas with PL connectors are connected via the additional antenna connection of the on-board voltage adapter.
The Midland/Albrecht 2-pin standard accessory connection enables the connection of external headsets for any application.
The device also offers a standard BNC antenna connection to further optimise the range in portable operation
Included with delivery: Alan 42 DS hand-held radio, battery compartment for 6 AA alkaline batteries, battery compartment for 8 rechargeable round-cell R6 AA batteries with charging connection, plug-in charger, on-board power adapter with antenna connection for PL plug, protective cover, antenna, belt clip, carrying strap"
EAN: 8011869200007
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"The versatile Alan 42 DS comes with a wide range of accessories for every application.
- Extensive range of accessories included with delivery
- Digital squelch
- Switchable to any European national standard
- AM/FM modulation
- Noise blanker
- EMG emergency channel
- Battery level warning
- Reception signal strength (RX) and transmission power (TX)
- High/low transmission power switchover
- Detachable antenna (BNC connector)
New: Digital squelch makes the Alan 42 DS particularly convenient top operate, and guarantees optimum reception sensitivity at all times.
By switching the country standard, the device can be used in any European country.
The extensive range of accessories for the Alan 42 DS allows the device to be used in different scenarios. Two exchangeable battery compartments are included for portable operation with rechargeable or alkaline batteries. These can be easily exchanged for the on-board power adapter with a 12-V cigarette lighter connection for mobile use in the car. External CB antennas with PL connectors are connected via the additional antenna connection of the on-board voltage adapter.
The Midland/Albrecht 2-pin standard accessory connection enables the connection of external headsets for any application.
The device also offers a standard BNC antenna connection to further optimise the range in portable operation
Included with delivery: Alan 42 DS hand-held radio, battery compartment for 6 AA alkaline batteries, battery compartment for 8 rechargeable round-cell R6 AA batteries with charging connection, plug-in charger, on-board power adapter with antenna connection for PL plug, protective cover, antenna, belt clip, carrying strap"
EAN: 8011869200007
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
BROTHER P-TOUCH E310BTVP - Labelling machine, hand-held device
185.67 EUR
"Professional labelling machine for industrial useThe PT-E310BTVP is a professional labelling machine for the electrical trade. A particular highlight is the integrated Bluetooth interface that lets you easily control the device using a smartphone or tablet. In addition to a Li-Ion battery, there is also a labelling tape in the carry case.
Included in delivery
- PT-E310BT labelling machine
- Li-Ion battery, USB Type C
- Cable (1 m, black),
- 1x 18-mm black on yellow
- extra-strong adhesive
- labelling tape,
- hand strap, carrying case,
- documentation
*An AC adapter is no longer included in the scope of delivery as with the previous series. If the supplied USB-C cable is not sufficient, the right mains adapter can be purchased as an optional accessory: PA-AD-004 (PAAD004EU)."
BROTHER P-TOUCH H100LB - Labelling machine, hand-held device
35.8 EUR
"Flexible labelling machine for home office and work office useThe Brother P-touch H100LB is a compact, versatile hand-held labelling machine for creating individual labels. The device has an ABC keyboard with separate numeric keypad and prints up to 20 mm/second. TZe tapes of widths 3.5 - 12 mm can be used in the device. A variety of print and tape colours are available. Choose from 7 frames, 8 font styles, 178 icons and 3 print sizes. The Deco mode and the Auto-Design function provide an individual touch, which allows the labels to be designed in different variants.
- For 3.5 to 12-mm wide TZe tapes
- Print speed of up to 20 mm/s
- Large 12-character display
- ""Deco Mode"" feature for individual labels
- Flag labels for cable labelling
- Multiple copy printout of up to 9
Scope of delivery: P-Touch H100LB, laminated TZe labelling tape (12 mm x 4 m, black on white)
Power supply, batteries: 6 micro (AAA) (not included)"
PROXXON 28941 - Chuck for hand-held Micromot devices
14.81 EUR
3-jaw chuck for hand-held Micromot devicesClamping range: 0.5 - 3.2 mm
Not for Proxxon Micromot GG12, IB/E, LB/E, Colt2, and MICROMOT 50 and 50/E
PROXXON 28940 - Collets for hand-held Micromot devices 6-piece
17.17 EUR
Micromot steel collets for all hand-held Micromot devices.1 piece each for 1.0/1.5/2.0/2.4/3.0/3.2mm with clamping nut and collet holder.
ICOM IC-F29SDR - Licence-free hand-held radio (dPMR446/PMR446)
319 EUR
The IC-F29SDR's digital channels ensure stable communication for professional use. A licence is not required, so it can be used immediately. The handheld radio has 32 digital and 16 analogue channels and is therefore compatible with existing PMR446 radio devices.Excellent 1500-mW LF power
The newly developed internal loudspeaker ensures crystal clear communication, even in noisy environments.
Alert tone for help in emergency situations
You can use the alert tone function to inform others about an emergency. The lone worker function also sends an alert tone if the hand-held radio is not operated within a pre-specified time.
All information on the LCD screen
The IC-F29SDR has an LCD display, with which settings such as the Common ID or the key acknowledgement tone can be changed quickly and easily. In situations where speaking is not possible, a PC-configurable status message* can be sent.
*Requires optional programming software and cables.
BROTHER P-TOUCH E560BTSP - Labelling machine, hand-held device
268.36 EUR
"Professional labelling machine for industrial useDesigned for electrical and network installers. The PT-E560BT offers a professional labelling solution for any electrical and data communication installation. The clear identification of cables, lines, pipes, switches and sockets with durable and robust labels is essential for installation technicians of electrical, data communications, telecommunications and security equipment.
Bluetooth interface
The PT-E560BTVp is a professional labelling machine for the electrical trade. A particular highlight is the integrated Bluetooth interface that lets you easily control the device using a smartphone or tablet. In addition to a lithium-ion battery, there are also two labelling tapes in the carry case.
Included in delivery
- PT-E560BT labelling machine
- Lithium-ion battery
- USB Type-C cable (1 m, black)
- 1x 12-mm wide black-on-white flexi tape
- 1x 18-mm wide black-on-white extra-strong adhesive labelling tape
- 1x 24-mm wide black-on-white extra-strong adhesive labelling tape
- 1x 24-mm black-on-yellow extra-strong adhesive labelling tape
- Wrist strap
- Carrying case
- Documentation
BROTHER P-TOUCH E560BTVP - Labelling machine, hand-held device
268.36 EUR
"Professional labelling machine for industrial useDesigned for electrical and network installers. The PT-E560BT offers a professional labelling solution for any electrical and data communication installation. The clear identification of cables, lines, pipes, switches and sockets with durable and robust labels is essential for installation technicians of electrical, data communications, telecommunications and security equipment. With built-in, industry-specific features, one-touch application buttons plus a Bluetooth interface, the PT E560BT enables fast and efficient label printing wherever you are.
Included in delivery
- PT-E560BT labelling machine
- Lithium-ion battery
- USB Type-C cable (1 m, black)
- 1x 12-mm wide black on white flexi tape
- 1x 24-mm black on yellow extra strong adhesive label tape
- Wrist strap
- Carrying case
- Documentation
*An AC adapter is no longer included in the scope of delivery as with the previous series. If the supplied USB-C cable is not sufficient, the right mains adapter can be purchased as an optional accessory: PA-AD-004 (PAAD004EU)."
UNI-TREND UTD 1025 DL - 2 CH hand-held DSO, 25MHz, 250MS/s, with DMM
446.13 EUR
"The 2-channel DSO UTD1025DL combines the functionality of a high-quality digital oscilloscope with an analogue bandwidth of 25 MHz and a sampling rate of 250 MS/s with a digital multimeter in a mobile, battery or mains-powered measuring device.The functions and properties:
• 2-channel DSO with 25 MHz analogue bandwidth, sampling rate 250 MS/s (real-time)
• Extremely easy commissioning with auto setup and auto scale
• High-resolution 8.89 cm / 3.5"" colour LCD screen, 320 x 240 pixels, can be switched to b/w display
• High measurement resolution of up to 20 V/Div
• Storage option for screen image (also multimeter)
• Extensive display and analysis functions (FFT) for signal evaluation
• Internal recorder for signal characteristics with playback function
• Cursor control and evaluation functions
• Automatic recording of 19 signal parameters, configurable
• Extensive trigger options: Edge, pulse width, video, slope
• Auto-range digital multimeter (3.75 digit) for AC/DC voltage measurement up to 400 V AC/DC current measurement
Up to 6 A, resistance measurement up to 40 MOhm, capacity up to 100 µF, continuity test, diode test, hold function, relative value measurement
• Built-in On-Screen-Hilfesystem
• Isolated USB port
• Mains and battery operation (integrated, replaceable Li-ion battery for up to 8 h operating time)
Oscilloscope:
Channels: 2
Bandwidth: 25 MHz
Sample rate: 250 MS/s Real Time
Rise time: 14 ns
Memory depth: 12 kpts
Vertical sensitivity: 5 mV/div ~ 20 V/div
Horizontal time basis: 10 ns/div ~ 50 s/div
Storage form: Bitmap, setup, waveform
Trigger mode: Edge, pulse, video, slope
Interface: Mini USB
Digital multimeter:
Display: 4000 counts
DC voltage: 400mV / 4V / 40V /400V ±(1%+ 5)
AC voltage: 400mV / 4V / 40V /400V ±(1.2%+ 5)
DC current: 400µA / 4000µA ±(1.2%+ 5)
40mA / 4000mA ±(1%+ 5)
6A ±(2.5%+ 5)
AC current: 400µA / 4000µA ±(2%+ 5)
40mA / 4000mA ±(1.5%+ 5)
6A ±(2.5%+ 5)
Resistance: 400 Ohm / 4 kOhm / 40 kOhm / 400 kOhm / 4 MOhm ±(1.2%+ 5)
40 MOhm ±(1.5%+ 5)
Capacity: 51.2nF / 512nF / 5.12µF / 51.2µF / 100µF ±(3%+5)
Power supply: 100-240 V 50/60 Hz, integrated battery pack
LCD display: 3.5"" full colour display (320x240 pixels)
Included with delivery: Hand-held oscilloscope, DC adapter, test leads, 2 probes (1:1 / 10:1), 10A current divider, mains cable, power supply, battery pack, USB cable, software download instructions, carrying/storage case, user manual (German, English)"
SMC PNEUMATIK IZH10-H - Hand-held electrostatic measuring device
855.29 EUR
Hand-held electrostatic measuring deviceFor measuring electrostatic potential
CFH 52140 - Manual soldering device Piezo-Compact PC 140 incl. 1 compressed
37.85 EUR
"The Piezo Compact PC 140 including compressed gas can is a handy hand-held soldering device with integrated piezo ignition for safe and convenient working. With an output of 2.07 kW and a working temperature of approx. 730 °C, it is ideal for soft soldering and simple hard soldering work. It is operated with CFH screw-in cartridges - perfect for DIY enthusiasts and professionals.- High-quality hand-held soldering device
- The powerful special Ø 17 mm torch concentrates and focuses the flame, saving energy and reducing working time
- Ideal for soft and hard soldering
- Quick and convenient ignition at the touch of a button with piezo ignition
- Ergonomically shaped handle with adjusting wheel for flame regulation facilitates one-handed operation
- Lightweight device (only 293 g) for comfortable handling
- Compatible with CFH accessories such as gas cartridges
The CFH Piezo Compact PC 140 hand-held soldering tool including compressed gas can is a compact and powerful soldering tool for precise soldering work. With an output of approx. 2.07 kW and a working temperature of around 730 °C, the device is ideal for soft soldering and simple hard soldering applications. The integrated piezo ignition enables safe and convenient ignition without external aids. It is operated with CFH screw-in cartridges type UG 230 or UG 440, which are connected via a standardized cartridge connection valve (G.35 - 7/16"" UNEF). With a weight of only approx. 293 g and compact dimensions, the PC 140 is particularly handy and flexible to use - ideal for repairs, installations and DIY work.
Scope of delivery: Device, 1x gas can
Suitable products: CFH screw-in cartridge UG 230 (art. no. 52109), UG 440 (art. no. 52108)"
UNI-TREND UTD 1050 DL - 2 CH hand-held DSO, 50MHz, 250MS/s, with DMM
484.38 EUR
"The 2-channel DSO UTD1050DL combines the functionality of a high-quality digital oscilloscope with an analogue bandwidth of 50 MHz and a sampling rate of 250 MS/s with a digital multimeter in a mobile, battery or mains-powered measuring device.The functions and properties:
• 2-channel DSO with 50 MHz analogue bandwidth, sampling rate 250 MS/s (real-time)
• Extremely easy commissioning with auto setup and auto scale
• High-resolution 8.89 cm / 3.5"" colour LCD screen, 320 x 240 pixels, can be switched to b/w display
• High measurement resolution of up to 20 V/Div
• Storage option for screen image (also multimeter)
• Extensive display and analysis functions (FFT) for signal evaluation
• Internal recorder for signal characteristics with playback function
• Cursor control and evaluation functions
• Automatic recording of 19 signal parameters, configurable
• Extensive trigger options: Edge, pulse width, video, slope
• Auto-range digital multimeter (3.75 digit) for AC/DC voltage measurement up to 400 V AC/DC current measurement
Up to 6 A, resistance measurement up to 40 MOhm, capacity up to 100 µF, continuity test, diode test, hold function, relative value measurement
• Built-in On-Screen-Hilfesystem
• Isolated USB port
• Mains and battery operation (integrated, replaceable Li-ion battery for up to 8 h operating time)
Oscilloscope:
Channels: 2
Bandwidth: 50 MHz
Sample rate: 250 MS/s Real Time
Rise time: 7 ns
Memory depth: 12 kpts
Vertical sensitivity: 5 mV/div ~ 20 V/div
Horizontal time basis: 5 ns/div ~ 50 s/div
Storage form: Bitmap, setup, waveform
Trigger mode: Edge, pulse, video, slope
Interface: Mini USB
Digital multimeter:
Display: 4000 counts
DC voltage: 400mV / 4V / 40V /400V ±(1%+ 5)
AC voltage: 400mV / 4V / 40V /400V ±(1.2%+ 5)
DC current: 400µA / 4000µA ±(1.2%+ 5)
40mA / 4000mA ±(1%+ 5)
6A ±(2.5%+ 5)
AC current: 400µA / 4000µA ±(2%+ 5)
40mA / 4000mA ±(1.5%+ 5)
6A ±(2.5%+ 5)
Resistance: 400 Ohm / 4 kOhm / 40 kOhm / 400 kOhm / 4 MOhm ±(1.2%+ 5)
40 MOhm ±(1.5%+ 5)
Capacity: 51.2nF / 512nF / 5.12µF / 51.2µF / 100µF ±(3%+5)
Power supply: 100-240 V 50/60 Hz, integrated battery pack
LCD display: 3.5"" full colour display (320x240 pixels)
Included with delivery: Hand-held oscilloscope, DC adapter, test leads, 2 probes (1:1 / 10:1), 10A current divider, mains cable, power supply, battery pack, USB cable, software, carrying/storage case, user manual (German, English)"
PCE INSTRUMENTS PCE VT 1100S - PCE-VT 1100S vibration measuring device
335.33 EUR
"PCE-VT 1100S vibration tester with long measuring tip (approx. 45 mm)- For vibration measurements
- For measuring acceleration, vibration velocity and displacement
- Keeps the reading after each measurement
- Wide frequency range
- Cordless hand-held measuring device
- Handy and battery-powered
- Automatically shuts off after 20 seconds
Product benefits:
The vibration meter is used as a hand-held measuring device for the individual assessment of a vibration on machines and systems. With the help of this vibration meter, the actual condition can be easily determined on site. This means that appropriate changes can be made directly on site after the measurement. The new condition can then also be assessed. The vibration meter therefore serves as a measuring device for a relative measurement on different machines.
The vibration meter is essentially used for preventive maintenance of production machines. This vibration meter is used for a quick measurement of imbalance, as well as for checking the condition of bearings and gears. Very often, the vibration meter is used to assess the condition of smaller electric motors.
"
JOY-IT AT34 - USB measuring device AT34
24.63 EUR
"The TC66C is a small but multi-functional USB-C multimeter. By supporting current Quick Charge standards, it can also easily be used in conjunction with current hand-held hardware.- Measuring device for USB applications
- LCD display of measured values
- Shows current, voltage, power, output, voltage curve, internal resistance, temperature (int. sensor)
- Output via BT for evaluation on your PC/smartphone
- Supports: QC2.0, QC3.0, Huawei FCP, Huawei SCP, SAMSUNG AFC, PD
Technical data:
USB ports: USB type-C
Measurement ranges: 4 - 24 V DC/0 - 5 A/0 - 99 h 59 min 59 sec
Measuring accuracy: 0.005 - 30 volts
Display size: 1.44""
Dimensions: 49 x 22 x8 mm"
JOY-IT WE-0003 - Precision screwdriver set, 46 piece
30.61 EUR
Our high-quality, 46-piece tool set includes all the tools needed to repair fine electronic devices such as smartphones and game consoles.In addition to a total of 42 bits made of high-quality S2 tool steel, this includes aids for opening and gripping. The bits are held magnetically in their plastic holder, which is pushed into the high-quality aluminium housing and held there by a spring mechanism.
Thanks to the magnets provided, the plastic holder can also be used to magnetise the bits.
Specifications
Number of bits
42
Material
Bits: S2 tool steel
Bit storage: plastic
Housing & screwdriver: aluminium
Accessories included
Screwdriver/bit holder, tweezers, opening tool, magnetiser
Bits included
Philips: PH000, PH00, PH0, PH1
Slotted: SL1.0, SL1.5, SL2.0, SL2.5, SL3.0, SL3.5
Torx: T2, T3, T4
Torx with pin: T5H, T6H, T7H, T8H, T10H, T15H, T20H
Allen key: H0.7, H0.9, H1.3, H1.5, H2.0, H2.5, H3.0, H3.5
Internal square: SQ0, SQ1
2-hole clamp: U2.6, U3.0
Tri-point: Y0.6, Y2.0, Y2.5
Pentalobe: P2, P5, P6
3-edged: 2.0, 2.3
SIM
Bit for spacers: W1.5
More information
Dimensions
154 x 43 x 42 mm
Weight
283 g
BS SYSTEMS GMBH & CO. KG BOXX 6100000296 - Lid pads for XL-BOXX
14.39 EUR
The collapsible hard foam hold-down devices can be plugged onto the cover inserts XLB or directly into the honeycombs of the L-BOXX and LS-BOXX inside the lid. When the lid is closed, the load, such as heavy machines, is now held securely with light pressure during transport.
BERNSTEIN BERN 9 256 - Cover plate SPANNFIX, spare part
114.33 EUR
"Cover plate as accessory for board holder 9-253 and 9-253-ESDThanks to the practical cover plate, all inserted components are held in place when the board is turned over and can be soldered conveniently from the other side. The SPANNFIX is a universal ball joint clamping device. A third hand as a useful clamping and holding device with quick release mechanism, a useful aid in any workshop.
- Quality product 100% Made in Germany
- for precision ball joint with quick clamping
- 360° rotatable and infinitely adjustable
- covered with 20 mm thick conductive foam
- materials steel, plastic and foam conductive
- orientation dimensions approx. 280 x 130 x 20 mm
- weight 260 g
ZEBRA SGTC2LHSTR - Wrist strap, for Zebra TC22/TC27
40.91 EUR
"Zebra wrist strap- for Zebra TC22 and TC27 mobile computers
- allows the device to be easily held in the palm of your hand
- can be attached directly to the device, even when a rugged protective cover (SG-TC2L-BOOT-01) is installed.
- Available separately: Rugged protective cover: SG-TC2L-BOOT-01
TS4GUSDC4 - MicroSDHC-Card 4GB, Transcend Class 4
51.24 EUR
"Smartphones, tablet PCs, ebook readers, hand-held game consoles and other devices usually have a limited amount of built-in storage. Transcend's microSDHC Class 4 cards are a cost-effective way to expand device memory capacity and store many times more movies, music, ebooks and app data.Features
- Fully complies with SD 2.0 specifications
- Class 4 rating guarantees reliable write performance
- Meets the requirements of most mobile devices, including digital cameras, cell phones, and eBook readers
- Built-in Error Correcting Code (ECC) to detect and correct transfer errors
- Exclusive RecoveRx photo recovery software
TS16GUSDC4 - MicroSDHC-Card 16GB, Transcend Class 4
58.48 EUR
"Smartphones, tablet PCs, ebook readers, hand-held game consoles and other devices usually have a limited amount of built-in storage. Transcend's microSDHC Class 4 cards are a cost-effective way to expand device memory capacity and store many times more movies, music, ebooks and app data.Features
- Fully complies with SD 2.0 specifications
- Class 4 rating guarantees reliable write performance
- Meets the requirements of most mobile devices, including digital cameras, cell phones, and eBook readers
- Built-in Error Correcting Code (ECC) to detect and correct transfer errors
- Exclusive RecoveRx photo recovery software
STRAPUBOX SP 2512 SW - ABS case enclosure, 124 x 72 x 30 mm, black
16.05 EUR
ABS case enclosureConsisting of a half-shell, as well as the associated outer grained lid. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
Outside dimensions: 124 x 72 x 30 mm
STRAPUBOX SP 2044 SW - ABS case enclosure, 50 x 38 x 14 mm, black
11.91 EUR
ABS case enclosureWith external fixing lugs Consisting of a half-shell, as well as the associated outer grained lid. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
STRAPUBOX SP 2001 SW - ABS case enclosure, 120 x 60 x 36 mm, black
16.88 EUR
ABS case enclosureConsisting of a half-shell, as well as the associated outer grained lid. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
STRAPUBOX SP 2004 SW - ABS case enclosure, 140 x 60 x 34 mm, black
16.31 EUR
ABS case enclosureConsisting of a half-shell, as well as the associated outer grained lid with circumferential groove look. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
STRAPUBOX SP 2002 SW - ABS case enclosure, 128 x 59 x 47 mm, black
16.05 EUR
ABS case enclosureConsisting of a half-shell, as well as the associated outer grained lid. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
BOPLA BS 600F - BOPLA BOS-Streamline BS 600
28.87 EUR
BOPLA BOS-Streamline BS 600New hand-held housing design with ergonomic lines that opens up a host of applications in the field of data acquisition and processing. The design permits a parallel or desk-style arrangement of the half-shells and allows the device to be used in portrait or landscape format. A recess is provided in the upper part for membrane keypads. The optional decorative seal achieves protection class IP65 and increases the interior height by 2.5 mm.
Colour: graphite grey (RAL 7024)
Protection class: IP40
Dimensions (LxWxH): 159.4 x 77.9 x 33.5 mm
STRAPUBOX SP 2062 SW - ABS case enclosure, 85 x 65 x 28 mm, black
14.39 EUR
ABS case enclosureConsisting of a half-shell, as well as the associated outer grained lid with circumferential groove look. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
STRAPUBOX SP 2090 SW - ABS case enclosure, 129 x 40 x 26 mm, black
13.26 EUR
ABS case enclosureConsisting of a half-shell, as well as the associated outer grained lid with circumferential groove look. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
STRAPUBOX SP 2000 SW - ABS case enclosure, 103 x 62 x 26 mm, black
12.59 EUR
ABS case enclosureConsisting of a half-shell, as well as the associated outer grained lid with circumferential groove look. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
BOPLA BS 500 - BOPLA BOS-Streamline BS 500
28.24 EUR
BOPLA BOS-Streamline BS 500New hand-held housing design with ergonomic lines that opens up a host of applications in the field of data acquisition and processing. The design permits a parallel or desk-style arrangement of the half-shells and allows the device to be used in portrait or landscape format. A recess is provided in the upper part for membrane keypads. The optional decorative seal achieves protection class IP65 and increases the interior height by 2.5 mm.
Colour: graphite grey (RAL 7024)
Protection class: IP40
Dimensions (LxWxH): 140.3 x 72.9 x 31.3 mm
BOPLA BS 700 - BOPLA BOS-Streamline BS 700
30.93 EUR
BOPLA BOS-Streamline BS 700New hand-held housing design with ergonomic lines that opens up a host of applications in the field of data acquisition and processing. The design permits a parallel or desk-style arrangement of the half-shells and allows the device to be used in portrait or landscape format. A recess is provided in the upper part for membrane keypads. The optional decorative seal achieves protection class IP65 and increases the interior height by 2.5 mm.
Colour: graphite grey (RAL 7024)
Protection class: IP40
Dimensions (LxWxH): 184.3 x 93 x 35.4 mm
BOPLA BS 403 - BOPLA BOS-Streamline BS 403, incl. battery compartment
32.59 EUR
BOPLA BOS-Streamline BS 403New hand-held housing design with ergonomic lines that opens up a host of applications in the field of data acquisition and processing. The design permits a parallel or desk-style arrangement of the half-shells and allows the device to be used in portrait or landscape format. A recess is provided in the upper part for membrane keypads. The optional decorative seal achieves protection class IP65 and increases the interior height by 2.5 mm.
Battery compartment: for 3x AAA
Colour: graphite grey (RAL 7024)
Protection class: IP40
Dimensions (LxWxH): 119.3 x 64.9 x 26.5 mm
BOPLA BS 400 - BOPLA BOS-Streamline BS 400
27.31 EUR
BOPLA BOS-Streamline BS 400New hand-held housing design with ergonomic lines that opens up a host of applications in the field of data acquisition and processing. The design permits a parallel or desk-style arrangement of the half-shells and allows the device to be used in portrait or landscape format. A recess is provided in the upper part for membrane keypads. The optional decorative seal achieves protection class IP65 and increases the interior height by 2.5 mm.
Colour: graphite grey (RAL 7024)
Protection class: IP40
Dimensions (LxWxH): 119.3 x 64.9 x 26.5 mm
STRAPUBOX SP 2030 GR - ABS case enclosure, 80 x 46 x 26 mm, grey
14.6 EUR
ABS case enclosureConsisting of a half-shell, as well as the associated outer grained lid. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
BOPLA BS 800 DIS - BOPLA BOS-Streamline BS 800, with display cutout
40.91 EUR
BOPLA BOS-Streamline BS 600 with display cutoutNew hand-held housing design with ergonomic lines that opens up a host of applications in the field of data acquisition and processing. The design permits a parallel or desk-style arrangement of the half-shells and allows the device to be used in portrait or landscape format. A recess is provided in the upper part for membrane keypads. The optional decorative seal achieves protection class IP65 and increases the interior height by 2.5 mm.
Colour: graphite grey (RAL 7024)
Protection class: IP40
Dimensions (LxWxH): 209.3 x 98.0 x 34.8 mm
STRAPUBOX SP 2099 GR - ABS case enclosure, 90 x 46 x 26 mm, grey
12.64 EUR
ABS case enclosureConsisting of a half-shell, as well as the associated outer grained lid with circumferential groove look. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
BOPLA BS 800 - BOPLA BOS-Streamline BS 800
34.24 EUR
BOPLA BOS-Streamline BS 800New hand-held housing design with ergonomic lines that opens up a host of applications in the field of data acquisition and processing. The design permits a parallel or desk-style arrangement of the half-shells and allows the device to be used in portrait or landscape format. A recess is provided in the upper part for membrane keypads. The optional decorative seal achieves protection class IP65 and increases the interior height by 2.5 mm.
Colour: graphite grey (RAL 7024)
Protection class: IP40
Dimensions (LxWxH): 209.3 x 98.0 x 34.8 mm
STRAPUBOX SP 2043 SW - ABS case enclosure, 54 x 37 x 21 mm, black
11.71 EUR
ABS case enclosureWith external fixing lugs Consisting of a half-shell, as well as the associated outer grained lid. Screwed connection with internal pillars. Recessed cams are used for fastening to printed circuits. Suitable for mounting hand-held transmitters, computer components, command devices etc.
FREI H05VV F3G1,5 100 - Flexible cable, 3 x 1.5 mm², black, 100-m coil
150.04 EUR
PVC flexible cable conforming to VDE 0281For use with light hand-held devices under low mechanical stress. Not for cooking, heating, and warming appliances, or for outdoor use.
• 3-wire /100 metres
• Operating temperature:
• Permanently installed: -40°C to + 70°C
• Flexibly installed: -5°C to + 70°C
• Rated voltage: Uo/U 300/500 V
• Jacket colour: black
FREI H05VV F3G1,5 5M - Flexible cable, 3 x 1.5 mm², black, 5-m coil
18.32 EUR
PVC flexible cable conforming to VDE 0281For use with light hand-held devices under low mechanical stress. Not for cooking, heating, and warming appliances, or for outdoor use.
• 3-wire / 5 meters
• Operating temperature:
• Permanently installed: -40°C to + 70°C
• Flexibly installed: -5°C to + 70°C
• Rated voltage: Uo/U 300/500 V
• Jacket colour: black