ADAFRUIT DEBO RTC UHR2 - Developer Boards - Precision Real-Time Clock, DS3231
32.28 EUR
Detailed sheet with complete information, compare prices and find the features for PRODUCTNAME, at the price of PRICE CURRENCY; classified in the category CATEGORY NAME; this product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
Precision Real-Time Clock DS3231
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Precision Real-Time Clock DS3231
supply voltage: 3.3 V- Dimensions: 23 x 17.6 x 7.2 mm
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
ADAFRUIT DEBO GPS - Developer boards - GPS breakout board, MTK3333
56.46 EUR
The Breakout is based on the MTK3333 chipset, a high-quality GPS module that can track up to 22 satellites on 66 channels, and has an excellent high-sensitivity receiver (-165 dB tracking) and a built-in antenna. It can perform up to 10 location updates per second to enable fast, high-sensitivity recording or tracking. The power consumption during navigation is very low at 20 mA, - Satellites: 22 (acquisition), 66 (search)
- Update rate: 1 to 10 Hz
- Position accuracy: 3 m
- Speed accuracy: 0.1 m
- Warm / cold start in 34 seconds
- Recording sensitivity: -145 dBm
- Detection sensitivity: -165 dBm
- Maximum speed: 515 m/s
- with jammer detection and reduction
- Dimensions: 35 x 25.5 x 6.5 mm
ADAFRUIT DEBO LED NP16 - Developer Boards - NeoPixel Ring with 16 WS2812 RGB LEDs
23.8 EUR
16 ultrabright LED Neopixels arranged in a circle.- 16 individually addressable RGBs
- voltage range: 4 - 7 V
- outside diameter: 44.5 mm
- inside diameter: 31.7 mm
ADAFRUIT DEBO LED PIXIE - Developer boards - Pixie, linkable Smart LED Pixel, FD-3RGB-Y2
29.38 EUR
linkable smart LEDs- small and user friendly
- Power: 3 W
- Dimensions: 24.1 x 19.7 x 8.2 mm
ADAFRUIT DEBO LED NP24 - Developer Boards - NeoPixel Ring with 24 WS2812 RGB LEDs
27.78 EUR
24 ultrabright LED Neopixels arranged in a circle.- 24 individually addressable RGBs
- with integrated drivers
- constant current: 18 mA
- voltage range: 4 - 7 V
- outside diameter: 65.6 mm
- inside diameter: 52.3 mm
ADAFRUIT DEBO LED NP12 - Developer Boards - NeoPixel Ring with 12 WS2812
20.13 EUR
12 ultrabright LED Neopixels arranged in a circle.- 16 individually addressable RGBs
- voltage range: 4 - 7 V
- outside diameter: 36.8 mm
- inside diameter: 23.3 mm
ADAFRUIT DEBO SOUND AMP2 - Developer boards - Audio amplifier, stereo, 3.7 W, class D, MAX9
22.3 EUR
This super small stereo amplifier is surprisingly powerful. It can deliver up to 3.7 watts for speakers with an impedance of 3-8 ohms.- exceeds the EMI limit unfiltered with up to 30 cm of speaker cable
- supply voltage: 2.7 - 5.5 V
- selectable amplification via 5 pins
- Dimensions: 28 x 24 x 3 mm
ADAFRUIT DEBO AMP 16BIT - Developer boards - A/D amplifier board, 16-bit, ADS1115
29.38 EUR
The ADS1115 amplifier board provides 16-bit precision at 860 samples per second- 4-channel
- with one amplifier with programmable gain
- Voltage range: 2 - 5.5 V
- Dimensions: 25.4 x 17.8 x 4.6 mm
ADAFRUIT DEBO AMP THERMO2 - Developer Boards - Thermocouple Amplifier, AD8495
26.44 EUR
thermocouple amplifier- detection accuracy range: ± 2°C
- temperature range: -250 to +750°C
- supply voltage: 3 - 18 V
- supplied with 2-pin terminal
- only thermocouples of type K
- Dimensions: 20 x 16 x 2 mm
ADAFRUIT DEBO AMP THERMO - Developer Boards - Thermocouple Amplifier, MAX31855
29.38 EUR
Thermocouple Amplifier Breakout Board MAX31855- Works with any type K thermocouple .
- -200°C to + 1350°C Output in steps of 0.25 degrees
- Accuracy from 2 to 6°C
- Power supply: 3.3 to 5 V
- Dimensions: 20 x 20 x 3.3 mm
ADAFRUIT DEBO AMP 12BIT - Developer boards - ADC + amplifier board,
23.8 EUR
The ADS1015 amplifier board offers 12-bit precision at 3,300 samples per second- voltage range: 2 - 5.5 V
- Dimensions: 17 x 28 x 3 mm
ADAFRUIT DEBO AMP MIC2 - Developer Boards - Microphone Amplifier, MAX9814
21.01 EUR
Electret Microphone Amplifier MAX9814- supply voltage: 2.7 - 5.5 V
- Frequency range: 20 Hz - 20 KHz
- automatic gain, selectable
- Dimensions: 26 x 14 mm
SOLDERED DEBO 3.5 JACK - Developer boards - 3.5 mm jack socket, stereo
11.35 EUR
This product allows users to utilize all pins of a male 3.5 mm connector with four pins via an easily accessible header. It is optimized for use with Arduino (or a compatible board such as Dasduino).- Allows access to all four pins of the 3.5 mm connector
- Compatible with Arduino (or a compatible board such as Dasduino)
- Easy handling due to user-friendly design
- Ideal solution for audio applications
- Robust construction for long-term use
The product is an efficient solution for handling audio components in conjunction with Arduino (or a compatible board such as Dasduino). The connection is made via a header that provides direct access to all four pins of the 3.5 mm connector. This configuration is particularly advantageous for developers working in audio technology who require a precise and uncomplicated connection. The robust design ensures the longevity and reliability of the product.
Technical data
- Dimensions: 22 mm x 22 mm
- Board connection: 3.5 mm female, accepts 3.5 mm male
- Connections: Ground, right speaker, left speaker, microphone
- Mounting holes: 2
In summary, this product offers an indispensable function for anyone involved in the development of audio projects. It greatly simplifies the connection process and increases flexibility when working with audiovisual media.
External links
https://github.com/SolderedElectronics/3.5mm-Jack-breakout-hardware-design
ADAFRUIT DEBO SENS DC - Developer boards - DC current sensor
23.8 EUR
DC current sensor for current and voltage measurementsInstead of struggling with two multimeters, you can simply use the handy INA219B chip on this board to measure both voltage and DC current consumption via the I2C interface.
- Current measurement resistance: 0.1 Ohm / 1% / 2 W
- Target voltage: up to 26 V
- Current measurement: up to 3.2 A
- Resolution: 0.8 mA
- Dimensions: 20 x 23 mm
ADAFRUIT DEBO POWER2 - Developer boards - Charger for Li-Ion / LiPo batteries with micr
21.27 EUR
Charger for charging single Li-Ion and LiPo batteries- pre-assembled
- input voltage: 5 V via microUSB
- 100 mA charging current, adjustable to 500 mA by re-soldering
- with JST cable
- Dimensions: 19 x 2 x 21 mm
ADAFRUIT DEBO TOUCH SENS - Developer boards - board for capacitive touch sensors, MPR121
20.91 EUR
You can connect up to 12 individual touch sensors to this board.- flashing LED when touch is detected
- Dimensions: 33 x 19 x 2 mm
2 pin headers included in the scope of delivery
ADAFRUIT DEBO LOGIC 4CH - Developer boards - bidirectional logic level converter, 4-channe
17.34 EUR
Bidirectional Logic Level Converter BSS138- 4-channel
- I2C-safe
ADAFRUIT DEBO POWER1 - Developer boards - Charger for Li-Ion / LiPo batteries, MCP73831
18.21 EUR
Charger for charging single Li-Ion and LiPo batteries- pre-assembled
- input voltage: 5 V
- 100 mA charging current, adjustable to 500 mA by re-soldering
- with JST cable
- Dimensions: 12.5 x 8 x 30 mm
ADAFRUIT DEBO POWER4 - Developer boards - Charger for Li-Ion / LiPo batteries, miniUSB,
27.32 EUR
Charger for charging single Li-Ion and LiPo batteries with 3.7 or 4.2 V- pre-assembled
- input voltage: up to 5 V via miniUSB
- 500 mA Charging current, adjustable to 100 to 1000 mA by re-soldering
- with JST cable
ADAFRUIT DEBO LIGHT SENS6 - Developer boards - light sensor, TSL2591
16.98 EUR
Light sensor with high dynamic range - TSL2591- Contains both infrared and full spectrum diodes
- Sensitivity: 188 µLux
- Input measurements up to 88,000 lux
- Uses I2C-7-bit address 0x29, 0.28 (fixed)
- Supply voltage: 3.3 - 5 V
- STEMMA QT connector for the I2C bus
- Dimensions: 16 x 19 x 1 mm
ADAFRUIT DEBO SENS ACC2 - Developer Boards - Accelerometer Board, MMA8451Q
21.22 EUR
This accelerometer board can be used with phones, tablets, smart watches and many more.- simple use with Arduino or another microcontroller
- installed tilt / position detection
- Wide range of use from 2 to 8 g
- very precise with built-in 14-bit ADC
- Dimensions: 21 x 18 x 2 mm
SOLDERED DEBO EASYC 20CM - Developer boards - EasyC cable, 20cm
11.09 EUR
The easyC system enables easy connection of microcontroller boards, sensors and actuators for fast prototyping without errors. The modules are connected via simple, prefabricated cables. easyC modules have suitable connections for these cables and are based on I2C communication.- easyC compatible cable
- easyC connections at both ends
- cable length: 20 cm
- simple and error-free connection
- suitable for Arduino (or a compatible board such as Dasduino)
The easyC compatible cable is specially designed for easy integration into the easyC system. It has easyC connectors at both ends and a cable length of 20 cm, which allows flexible handling and installation. The modules' prefabricated cables and socket connectors ensure a reliable and secure connection. The I2C-based communication allows efficient and error-free data transmission between the connected components. This cable is particularly suitable for use with Arduino (or a compatible board such as Dasduino), which extends the versatility and range of applications of the easyC system.
In summary, the easyC compatible cable provides a reliable and efficient solution for connecting microcontroller boards, sensors and actuators in the easyC system, supported by I2C communication.
ADAFRUIT DEBO MOTODRIVER4 - Developer boards - servo driver, 16 channel, 12 bit, PCA9685
29.38 EUR
PWM driver board with integrated clock• 6-address dialing pins
• adjustable frequency PWM up to about 1.6 kHz
• 12 bit resolution for each output
• configurable push-pull or open-drain output
• Dimensions: 62.5 x 25.4 x 3 mm
Scope of delivery
• Servo driver board
• solderable power terminal
• various solderable connectors
ADAFRUIT DEBO HAPTICMOTO - Developer boards - haptic motor control, DRV2605L
21.01 EUR
This board has been specially developed for haptic motors, such as sum and vibration motors- Control via the I2C interface
- Supply voltage: 3 or 5 V
- has STEMMA QT connectors
- Dimensions: 25.8 x 17.8 x 4.6 mm
ADAFRUIT DEBO TEMP HUM2 - Developer Boards - Temperature and Humidity Sensor, Si7021
26.23 EUR
Breakout board with temperature and humidity sensor Si7021- Sensor for Silicon Labs
- measures relative humidity with ±3 %
- temperature accuracy: ± 0.4°C
- temperature range: -10 to +85°C
- Dimensions: 15.3 x 17.8 x 3 mm
ADAFRUIT DEBO SENS ACC - Developer boards - accelerometer, 3-axis, LIS3DH
16.88 EUR
3-axis accelerometer LIS3DH- three-axis detection
- selectable scale length
- interrupt output
- multiple data rate options: 1 Hz to 5 KHz
- Dimensions: 20 x 20 x 2.6 mm
SOLDERED DEBO EASYC 50CM - Developer boards - EasyC cable, 50cm
11.35 EUR
The easyC system enables easy connection of microcontroller boards, sensors and actuators for fast prototyping without errors. The modules are connected via simple, prefabricated cables. easyC modules have suitable connections for these cables and are based on I2C communication.- easyC compatible cable
- easyC connections at both ends
- Cable length: 50 cm
- simple and error-free connection
- suitable for Arduino (or a compatible board such as Dasduino)
The easyC compatible cable is specially designed for easy integration into the easyC system. It has easyC connectors at both ends and a cable length of 50 cm, which allows flexible handling and installation. The modules' prefabricated cables and socket connectors ensure a reliable and secure connection. The I2C-based communication allows efficient and error-free data transmission between the connected components. This cable is particularly suitable for use with Arduino (or a compatible board such as Dasduino), which extends the versatility and range of applications of the easyC system.
In summary, the easyC compatible cable provides a reliable and efficient solution for connecting microcontroller boards, sensors and actuators in the easyC system, supported by I2C communication.
ADAFRUIT DEBO LOGIC 8CH - Developer boards - bidi. Logic level converter, 8-channel, TXB01
21.11 EUR
Bidirectional logic level converter- 8-channel
- VCC isolation function: If one of the VCC inputs is on ground, all outputs are in high impedance status
- Low current consumption: max. 4 mA
ADAFRUIT DEBO TEMP HUM - Developer Boards - Temperature and Humidity Sensor, SHT31-D
28.04 EUR
Breakoutboard with Temperature and Humidity Sensor Sensiron SHT31-D- Uses I2C address 0x44 or 0x45
- mitt relative humidity up to ±2%
- Accuracy: ±0.3°C
- 12.7 x 18 x 2.6 mm
ADAFRUIT DEBO PWR SOLAR1 - Developer boards - Charger for Li-Ion / LiPo batteries, USB/DC/S
32.64 EUR
Li-Ion and LiPo battery charger for use with solar panels- Charging with a 5-6 VDC, USB or 6 V solar panel
- automatic charge current detection for highly efficient use of solar panels with any wattage
- three color signal lamps-LEDs
- Battery warning display with LED output
- Set for maximum charging rates of 500 mA
- temperature monitoring
ADAFRUIT DEBO POWER3 - Developer boards - Pro Trinket for Li-Ion / LiPo batteries, MCP7
16.82 EUR
This small board reduces the battery voltage to 3.3 V and is used to charge individual Li-Ion and LiPo batteries.- pre-assembled
- input voltage: up to 5 V
- 100 mA Charging current, by re-soldering adjustable to 500 mA
- Dimensions: 15 x 17 x 2 mm
SOLDERED DEBO EASYC 10CM - Developer boards - EasyC cable, 10cm
10.83 EUR
The easyC system enables easy connection of microcontroller boards, sensors and actuators for fast prototyping without errors. The modules are connected via simple, prefabricated cables. easyC modules have suitable connections for these cables and are based on I2C communication.- easyC compatible cable
- easyC connections at both ends
- cable length: 10 cm
- simple and error-free connection
- suitable for Arduino (or a compatible board such as Dasduino)
The easyC compatible cable is specially designed for easy integration into the easyC system. It has easyC connectors at both ends and a cable length of 10 cm, which allows flexible handling and installation. The modules' prefabricated cables and socket connectors ensure a reliable and secure connection. The I2C-based communication allows efficient and error-free data transmission between the connected components. This cable is particularly suitable for use with Arduino (or a compatible board such as Dasduino), which extends the versatility and range of applications of the easyC system.
In summary, the easyC compatible cable provides a reliable and efficient solution for connecting microcontroller boards, sensors and actuators in the easyC system, supported by I2C communication.
ADAFRUIT DEBO SHD MOTOR - Developer Boards Shield - Servo, 16 Channel, 12 Bit, PCA9685
35.27 EUR
PWM driver Shield with integrated clock- 6 address selection pins
- adjustable frequency PWM up to approx. 1.6 kHz
- 12 bit resolution for each output
- configurable push-pull or open-drain output
- Dimensions: 54 x 70 x 3 mm
ADAFRUIT DEBO BOOST 500 - Developer Boards - Powerboost 500 Charger, TPS61090
27.94 EUR
This small format DC/DC boost converter module can be powered by any 3.7 V Li-Ion / LiPo battery and converts battery power to 5.2 V DC to keep your 5 V projects running.- with low-battery detection
- charging current: max. 500 mA
- 2 A internal switch
- Dimensions: 22 x 37 x 7 mm
SPARKFUN ELECTRONICS DEBO FORCE AMP - Developer boards - Load cell amplifier, HX711
25.14 EUR
For reading load cells with very accurate weight measurement.- Separate digital and analogue supply
- Two-wire interface (clock and data)
- HX711
- I2C interface
Load cells Colour coding
- Red (VCC)
- Black (GND)
- White (Amp+, Signal+ or Output+)
- Green (A-, S- or O-)
- Yellow (Shield)
FREI DEBO 6PIN 10PIN - Developer boards - 6 pin to 10 pin adapter
11.5 EUR
10 Pin to 6 Pin Adapter AVRISP/USBASP/STK500Convert ATME ISP standard 10PIN to standard 6PIN interface.
It facilitates you to program MinSys, Arduino UNO R3, Arduino Mega2560 and so on.
ADAFRUIT DEBO I2C-MULTI - Developer boards - I2C multiplexer board, TCA9548A
20.18 EUR
Up to 8 devices can be connected to a microcontroller via the I2C interfaces on this small board.- selectable I2C address: 0x70 to 0x77
- Dimensions: 30.6 x 17.6 x 2.7 mm
ADAFRUIT DEBO BOOST 1000 - Developer Boards - Powerboost 1000 Charger, TPS61090
35.74 EUR
This small format DC/DC boost converter module can be powered by any 3.7 V Li-Ion / LiPo battery and converts battery power to 5.2 V DC to keep your 5 V projects running.- charging current: max. 1000 mA
- with low-battery detection
- 2 A internal switch
- Dimensions: 22 x 37 x 7 mm
ALLNET DEBO EMMC 2 MSD - Developer boards - eMMC to microSD
16.05 EUR
With the help of this eMMC adapter you can easily connect a fast eMMC memory module to the developer board via the microSD interface without having to open the case.suitable for
- raspberry pi
- banana pi
- Rock Pi
- additional boards with Micro-SD slot
JOY-IT DEBO TFT 1.8 TD - Developer boards - Display, 1.8'', Touch, ST7735R
19.2 EUR
This mini LCD touch display is perfect for your Raspberry/Arduino project. The 1.8'' TFT display with SPI interface is universally applicable for your projects. It can display 262,000 colors and offers a maximum resolution of 128x160 pixels.
Specifications
• Display 4,57 cm (1,8'')
• resolution: 128 x 160 pixels
• contrast: 1:400
• 262,000 colors
• touch function
• LED backlight
• dimensions (WxHxD): 57 x 35 x 5 mm
• Panel: JD-T18003-T01
• IC driver: ST7735R
• SPI interface
• compatible with Raspberry Pi and Arduino
Note: Please note that programming knowledge is required to use this item.
Delivery without Raspberry Pi