ADA CIRCUIT - Development boards - Adafruit Circuit Playground Classic

ADAFRUIT DEBO MICROUSB - Development boards - USB Micro-B Breakout Board 12.01 EUR "You can connect this board to a microcontroller to expand it with a USB port

• pre-assembled
• Dimensions: 20 x 10 x 4 mm

"

SEE OFFER SEE OFFER ebay

ADAFRUIT DEBO FEATHER RTC - Development boards - Adalogger FeatherWing, RTC + SD-Addon 22.3 EUR "The Adafruit Feather are a complete line of development boards from Adafruit that are both standalone and stackable. They're able to be powered by lipo batteries for on-the-go use or by their micro-USB plugs for stationary projects. Feathers are flexible, portable, and as light as their namesake.

This FeatherWing will make it real easy to add datalogging to any of our existing Feathers. You get both an I2C real time clock (PCF8523) with 32KHz crystal and battery backup, and a microSD socket that connects to the SPI port pins (+ extra pin for CS). A CR1220 coin cell is required to use the RTC battery-backup capabilities!

• 50.8 x 22.9 x 1.6 mm

"

SEE OFFER SEE OFFER ebay

ESPRESSIF SYSTEMS ESP32S3DK-C1N8R8 - Development board ESP32-S3-WROOM-1-N8R8 27.11 EUR The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U or ESP32-S3-WROOM-2, a universal Wi-Fi + Bluetooth® Low Energy MCU module that integrates full Wi-Fi and Bluetooth Low Energy functions.

Most of the I/O pins of the module are brought out to the pin headers on both sides of this board for easy connection. Developers can either connect peripherals with jumper cables or mount the ESP32-S3-DevKitC-1 on a breadboard.

https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitc-1/index.html

SEE OFFER SEE OFFER ebay

FREI DEBO XH-W1209 C - Development boards - housing for XH-W1209, transparent 11.81 EUR "Acrylic housing to fit thermostat module XH-W1209

• Made from high-quality acrylic
• Colour: transparent
• Supplied with screws and nuts

The thermostat module is not supplied!"

SEE OFFER SEE OFFER ebay

HAGER ADA556D - FI/LS switch, 1P+N 10 kA C-6 A 30 mA type A 103.91 EUR Residual current circuit breaker according to DIN EN61009-1 (VDE 0664-20) and DIN EN 61009-2-1 (VDE 0664-21) with bi-connect terminals at the bottom, blue test button and residual current indicator. Simple removal from the phase rail network. Suitable for retrofitting additional equipment. Programming directly on the device.

Type of pole: 1P+N
Tripping characteristic: C
Nominal current: 6 A
Rated residual current Idn: 30 mA
Type of RCD: A
Rated switching capacity Icn according to IEC 60898-1: 10 kA
Insulation voltage Ui: 500 V
Surge voltage resistance: 4000 V
Total power loss below rated current: 1.90 W
Frequency: 50 - 50 Hz
Connection cross-section of the input with screws, with flexible conductor: 1 - 16 mm²
Connection cross-section of the input with screws, for solid conductors: 1 - 25 mm²

SEE OFFER SEE OFFER ebay

HAGER ADA560D - FI/LS switch, 1P+N 10 kA C-10 A 30 mA type A 105.15 EUR Residual current circuit breaker according to DIN EN61009-1 (VDE 0664-20) and DIN EN 61009-2-1 (VDE 0664-21) with bi-connect terminals at the bottom, blue test button and residual current indicator. Simple removal from the phase rail network. Suitable for retrofitting additional equipment. Programming directly on the device.

Type of pole: 1P+N
Tripping characteristic: C
Nominal current: 10 A
Rated residual current Idn: 30 mA
Type of RCD: A
Rated switching capacity Icn according to IEC 60898-1: 10 kA
Insulation voltage Ui: 500 V
Surge voltage resistance: 4000 V
Total power loss below rated current: 3.40 W
Frequency: 50 - 50 Hz
Connection cross-section of the input with screws, with flexible conductor: 1 - 16 mm²
Connection cross-section of the input with screws, for solid conductors: 1 - 25 mm²

SEE OFFER SEE OFFER ebay

ADAFRUIT DEBO HAPTICMOTO - Developer boards - haptic motor control, DRV2605L 21.01 EUR "This board has been specially developed for haptic motors, such as sum and vibration motors

• Control via the I2C interface
• Supply voltage: 3 or 5 V
• has STEMMA QT connectors
• Dimensions: 25.8 x 17.8 x 4.6 mm

"

SEE OFFER SEE OFFER ebay

JOY-IT ARD NANO V4-MC3V - Arduino-compatible Nano board, ATmega328PB, USB-C 19.98 EUR "ARD-NANOV4-3V-MC ATmega 328PB microcontroller board with 3-V logic

The ARD-Nanov4-3V-MC is a particularly small microcontroller that was specifically designed for working with plug-in boards, thanks to its downward-facing pin header. Via the integrated USB-type-C interface, the circuit and board can be supplied with power and programs can be transferred to the microcontroller. The logic level, standard 3.3 V, can be easily changed to 5 V via a solder bridge. The board has 2 additional IO pins and an additional hardware I2C and SPI interface (compared to ARD-Nano-V4-3V). The bootloader used is compatible with most existing Arduino libraries. The board also features a high-precision clock optimised for demanding applications and precise time measurements.

Features

• Microcontroller: ATmel Mega328PB
• Bootloader: Minicorei
• Clock speed: 8 MHz
• Deviation of the external clock (at room temperature): ±10 ppm (±0.001%)
• Logic level: 3.3 V/5 V can be switched via solder bridge
• Analogue pins: 8
• Digital pins: 14 (6 PWM)
• Other special features: Fully Arduino-compatible, high-precision clock frequency, USB-C interface

"

SEE OFFER SEE OFFER ebay

JOY-IT ARD NANO V4 - Arduino compatible Nano Board, ATmega328PB, USB-C 18.37 EUR ATmega 328PB microcontroller board

The ARD Nano V4 is a particularly small microcontroller and has been specially developed for working with plug-in boards thanks to the pin header that leads out at the bottom.
The integrated USB Type-C interface can be used to supply the circuit and board with power and to transfer programs.

The NanoV4 is fully compatible with the Arduino Nano V3

Features
• Microcontroller: Atmel Mega328PB
• Bootloader: ATmega328P
• Clock frequency: 16 MHz
• logic level: 5 V
• analog pins: 8
• digital pins: 14 (6 PWM)
• USB-C
• fully Arduino compatible

Specifications
• current (DC) per I/O pin: 40 mA
• 32 kB memory (2 kB for bootloader)
• 2 kB SRAM
• EEPROM: 1 kB
• Operating voltage: Vin-PIN: 7 - 12 V / USB Type-C: 5 V
• Current consumption: 20 mA
• Dimensions (WxD): 18.5 x 47 mm

SEE OFFER SEE OFFER ebay

DIGILENT DIGIL 410-398 - USB104 A7: Artix-7 FPGA development board with SYZYGY extension 489.03 EUR "Digilent's USB104 A7 features performance and versatility in a compact and rugged package for industrial SWaP applications. Designed for industrial temperature applications, the USB104 A7 features the Xilinx Artix-7 XC7A100T with an operating range of -40 °C to +100 °C.* The USB104 A7 also features a SYZYGY port for high-speed data acquisition by adding Zmod expansion modules. This allows users to quickly develop and run custom FPGA-based data acquisition and signal processing applications on embedded systems. Ideal application areas include industrial automation, embedded OEM, telecommunications and mil-aero.

The USB104 A7 matches the dimensions of the small and rugged PC/104 board. The inputs and outputs are equipped with on-board LEDs and push buttons. The SYZYGY-compatible Zmod expansion is complemented by three 12-pin Pmod ports. An integrated USB hub and controller connects the USB104 A7 to JTAG, UART and a parallel data interface (DPTI) via a single connection. The DPTI data transfer interface enables host-to-FPGA data transfer and is easily managed using Digilent's Adept 2 application. This ease of use and high-speed data transfer is especially useful for systems in the field.

FPGA Features

• Logic cells: 101,440
• DSP slices: 240
• Memory: 4,860 Kbits
• GTP 6.6Gb/s transceivers: 8
• I/O ports: 300

Memory

• 512MB DDR3/DDR3L with 16-bit bus @ 800Mbps (1.5V) or 667Mbps (1.35V)
• 16MB Quad-SPI Flash for FPGA configuration storage

Power supply

• power supply via an external 5V DC power supply connected to the barrel connector or via the USB port
• automatic switching between USB and external power supply, with external supply preferred
• NCP380 load switch limits USB current to 2 amps and reduces inrush current

USB

• USB-JTAG programming circuit
• USB-UART bridge
• clever DPTI/DSPI data transfer interface for high speed data transfer from host to FPGA
• integrated USB hub eliminates the need for multiple USB cable connections

Push buttons and LEDs

• 2 push buttons
• 4 LEDs

Expansion ports

• one standard SYZYGY connector (Zmod)
• three standard Pmod connectors

Form factor

• circuit board measures 3.775"" x 3.550"" (95.89 mm x 90.17 mm)

"

SEE OFFER SEE OFFER ebay

ESPRESSIF SYSTEMS ESP32-C6DEVKI1N8 - ESP32-C6-WROOM-1/U development board 22.15 EUR The ESP32-C6-DevKitC-1 is an entry-level development board based on the ESP32-C6-WROOM-1(U), a general purpose module with an 8-MB SPI flash. This board integrates complete Wi-Fi, Bluetooth LE, Zigbee and Thread functions.

Most of the I/O pins are split between the pin headers on both sides to facilitate connection. Developers can either connect peripherals with jumper wires or mount the ESP32-DevKitC-1 on a breadboard.

SEE OFFER SEE OFFER ebay

ROBOTIS OPENCM 485 - Expansion board for servo motors 55.22 EUR ROBOTIS OpenCM 485 Expansion Board

The Robotis OpenCM 485 Expansion Board was developed for controlling Dynamixel servo motors. Available as an option, the powerful OpenCM9.04-A/OpenCM9.04-C development board, based on an ARM Cortex-M3 MCU, can handle demanding tasks with ease. However, OpenCM 485 and OpenCM9.04 have very small dimensions even when used together, so automation processes can be developed or redesigned in an even smarter way.

Control options

Many of the Dynamixel controller boards currently on the market have either a TTL interface for connecting the popular AX/MX series or RS485 for the more expensive Dynamixel Pro servo motors. The OpenCM9.04 development board, however, features both of these interfaces for better flexibility.

SEE OFFER SEE OFFER ebay

JOY-IT "DEBO OLED5 0,96 - Development boards - OLED display, 0.96"", 128x64 pixels, blue" 15.63 EUR "The compact 0.96-inch (approx. 2.44-cm) OLED display is the ideal solution for your projects. Thanks to its flexible control via I2C or SPI, it can be easily integrated with Arduino, Raspberry Pi and other microcontrollers or single board computers.
OLED technology enables brilliant, high-contrast images without the need for backlighting, because each pixel itself lights up. This not only ensures excellent image quality, but also very low power consumption.

This display allows you to implement your ideas efficiently and impressively.

Specifications

• Screen size: 0.96"" (2.44 cm)
• Power supply: 3.3 - 5 V
• Number of pixels: 128x64
• Background colour: black
• Display colour: blue
• Compatible with Raspberry, Arduino
• Dimensions: 27 x 28 x 11 mm

"

SEE OFFER SEE OFFER ebay

JOY-IT ARD NANO V4-3V - Arduino-compatible Nano board, ATmega328PB, USB-C 18.37 EUR "ARD-NANOV4-3V ATmega 328PB microcontroller board with 3-V logic

The ARD-Nanov4-3V is a particularly small microcontroller, specifically designed for use with plug-in boards, thanks to its downward-facing pin header. Via the integrated USB-type-C interface, the circuit and board can be supplied with power and programs can be transferred to the microcontroller. The logic level, standard 3.3 V, can be easily changed to 5 V via a solder bridge. The board also features a high-precision clock optimised for demanding applications and precise time measurements.

Features

• Microcontroller: ATmel Mega328PB
• Bootloader: ATmega328P/Arduino Pro or Pro Mini
• Clock speed: 8 MHz
• Deviation of the external clock (at room temperature): ±10 ppm (±0.001%)
• Logic level: 3.3 V/5 V can be switched via solder bridge
• Analogue pins: 8
• Digital pins: 14 (6 PWM)
• Other special features: Fully Arduino-compatible, high-precision clock frequency, USB-C interface

Technical specifications

• DC current per I/O pin: 40 mA
• Memory: 32 kB (2 kB for boot loader)
• SRAM: 2 kB
• EEPROM: 1 kB
• Operating voltage: Vin PIN: 7 - 12 V, USB type C: 5 V
• Power requirement: approx. 30 mA
• Dimensions: 18.5 x 47 x 18.5 mm
• Weight: 7 g

Included in delivery

• ARD-NanoV4-3V

"

SEE OFFER SEE OFFER ebay

BATAVIA 7064793 - Cordless soldering iron, Fleischmann, 3.6 V, up to 400°C 43.08 EUR "Fleischmann 3.6-V soldering iron

Reliable, compact soldering for professionals and DIY enthusiasts
The Fleischmann 3.6-V soldering iron is the ideal tool for soldering electronic components such as circuit boards, electrical cables and a variety of DIY projects. This compact, lightweight soldering iron has been developed for both professionals and DIY enthusiasts and is reliable and easy to use for fast, efficient soldering work.

Why should you choose the Fleischmann 3.6-V soldering iron?

• Heats up quickly: Reaches 400°C in just 45 seconds for fast, efficient work.
• Wireless operation: The 3.6-V battery ensures that you can move freely and work anywhere.
• Compact and lightweight: Designed for easy handling and portability.
• USB-C charging: Simple, efficient charging for continuous use.

"

SEE OFFER SEE OFFER ebay

HAMMOND MANUFACTURING 1455C801BK - profile housing, 1455 C, 80 x 54 x 23 mm, black 22.87 EUR "

• Suitable as table and hand case
• Assembly option for circuit boards
• Housing parts are screwed together

"

SEE OFFER SEE OFFER ebay

HAMMOND MANUFACTURING 1455C802 - profile housing, 1455 C, 80 x 54 x 23 mm, silver 18.89 EUR "

• Suitable as table and hand case
• Assembly option for circuit boards
• Housing parts are screwed together

"

SEE OFFER SEE OFFER ebay

HAMMOND MANUFACTURING 1455C802BK - profile housing, 1455 C, 80 x 54 x 23 mm, black anodized 20.13 EUR "

• Suitable as table and hand case
• Assembly option for circuit boards
• Housing parts are screwed together

"

SEE OFFER SEE OFFER ebay

FREI HUT 4-C - DIN-rail empty enclosures, WxDxH 71x71x90 16.36 EUR DIN top-hat rail empty housing

The housing can be pushed onto the top-hat rail using the integrated snap-on base. Top and bottom snap together and can be screwed in place. With guide grooves for printed circuit boards. The inputs and outputs are connected via terminal strips (type AKL) in a 5.08-mm grid. For 13 terminals

SEE OFFER SEE OFFER ebay

FREI HUT 6-C - DIN top-hat rail empty housing, WxDxH 105x71x90 18.43 EUR DIN top-hat rail empty housing

The housing can be pushed onto the top-hat rail using the integrated snap-on base. Top and bottom snap together and can be screwed in place. With guide grooves for printed circuit boards. The inputs and outputs are connected via terminal strips (type AKL) in a 5.08-mm grid. For 35 terminals.

SEE OFFER SEE OFFER ebay

FREI HUT 1-C - DIN top-hat rail empty housing, WxDxH 17x71x90 14.45 EUR DIN top-hat rail empty housing

The housing can be pushed onto the top-hat rail using the integrated snap-on base. Top and bottom snap together and can be screwed in place. With guide grooves for printed circuit boards. The inputs and outputs are connected via terminal strips in a 5.08-mm grid.

SEE OFFER SEE OFFER ebay

M5STACK M5S C126 - ATOMS3R development kit with 0.85-inch display (8 MB PSRAM) 28.24 EUR AtomS3R is a highly integrated IoT programmable controller based on the ESP32-S3. It embeds an ESP32-S3-PICO-1-N8R8 SoC with on-chip Wi-Fi, 8MB Flash, and 8MB PSRAM. The device features a 0.85-inch color IPS display with a programmable button beneath it, an on-board 5 V-to-3.3 V power circuit, a three-axis BMM150 geomagnetic sensor, and a six-axis BMI270 IMU.

Power supply and firmware downloading are handled through a USB Type-C connector, while a HY2.0-4P port and six GPIO plus power pins on the bottom make expansion easy. Compared with previous products, AtomS3R is equipped with an enhanced 3D antenna that offers better performance and higher stability. With dimensions of just 24.0 x 24.0 x 12.9 mm, it is ideal for a variety of embedded smart-device applications.

SEE OFFER SEE OFFER ebay