REICHELT IE: Tvs
The Best

- Polarisation: linear H/V
- Noise factor: < 0.1 dB
- Amplification: 60 dB
- Current consumption: 250 mA
- Input frequency: 10.7 GHz - 12.75 GHz
- Feed diameter: 40 mm
- 100% water resistance (tested)
- Pull-out weather protection
- UHD, 4K and 3D enabled
The Ankaro LNC 8008 Octo Premium with a feed diameter of 40 mm and a very low noise level of less than 0.1 dB has already been tested by leading institutes and rated VERY GOOD.
Top quality from ANKARO at a special price.
The LNC is suitable for receiving digital channels from any satellite, whether 4K, full HD, DTV or 3D. Thanks to its high-quality design and innovative technology, this LNC enables optimum reception of weak signals in peripheral areas. The seal on the LNC prevents moisture from penetrating. Thanks to the weather protection cap supplied, the connection is protected from all weather influences.
LNC for 8 subscriber connections
Top Pick

- Polarisation: linear H/V
- Noise factor: < 0.1 dB
- Amplification: 56 dB
- Current consumption: 100 mA
- Input frequency: 10.7 GHz - 12.75 GHz
- Feed diameter: 40 mm
- 100% water resistance (tested)
- Pull-out weather protection
- UHD, 4K and 3D enabled
The Ankaro LNC 1001 Universal Single LNB with a feed diameter of 40 mm and a very low noise level of less than 0.1 dB has already been tested by leading institutions and rated VERY GOOD.
Top quality from ANKARO at a special price.
The LNC is suitable for receiving digital channels from any satellite, whether 4K, full HD, DTV or 3D. Thanks to its high-quality design and innovative technology, this LNC enables optimum reception of weak signals in peripheral areas. The seal on the LNC prevents moisture from penetrating. Thanks to the weather protection cap supplied, the connection is protected from all weather influences.
LNC for 1 subscriber connection
Excellent

- Polarisation: linear H/V
- Noise factor: < 0.1 dB
- Amplification: 56 dB
- Current consumption: 175 mA
- Input frequency: 10.7 GHz - 12.75 GHz
- Feed diameter: 40 mm
- 100% water resistance (tested)
- Pull-out weather protection
- UHD, 4K and 3D enabled
The Ankaro LNC 2002 Universal Twin LNB with a feed diameter of 40 mm and a very low noise level of less than 0.1 dB has already been tested by leading institutes and rated VERY GOOD.
Top quality from ANKARO at a special price.
The LNC is suitable for receiving digital channels from any satellite, whether 4K, full HD, DTV or 3D. Thanks to its high-quality design and innovative technology, this LNC enables optimum reception of weak signals in peripheral areas. The seal on the LNC keeps moisture from penetrating. Thanks to the weather protection cap supplied, the connection is protected from all weather influences.
LNC for 2 subscriber connections
Recommended

- Suitable for 1 participant
- Integrated sat finder function with an LED display
- Input frequency range: 10.7 - 11.7 GHz/11.7 - 12.75 GHz
- Amplification: 55 dB typ.
- Very low noise level: 0.1 dB
- In a plastic weatherproof housing
- Suitable for HD reception
- 40-mm feed mount
- Extremely cold- and heat-resistant
- 3D READY
- 4K - UHD compatible
- High level of frequency stability
Featured

- Resolutions up to 8K / UHD-2 at 60Hz and 4K / UHD at 240Hz
- High quality cable construction, triple shielding and soft PVC cable jacket
- Supports Display Stream Compression (DSC) 1.2
SmartFLEX Technology
Due to the SmartFLEX soft PVC technology, these multimedia cables are highly flexible compared to conventional, rather stiff PVC cables. The special composition of the cable jacket enables very small bending radii and thus facilitates the installation or laying of the cables. In addition to greater flexibility, SmartFLEX series cables are also distinguished by their mechanical strength and long durability compared to standard cables, especially in applications where the cable moves (e.g. industrial applications or moving supports).
HDMI 2.1 - resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz
This high-quality processed HDMI cable supports resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz (colour sampling 4:2:0 or DSC) with a bandwidth of max. 48 Gbit/s and thus meets all requirements of the HDMI 2.1 standard. In addition, 32 audio channels are supported at a sample rate / sampling rate of 1,536 kHz. This means that all known audio formats can be processed, including the new surround sound formats Dolby Atmos, DTS:X and Auro 3D.
High quality cable construction
The conductors of this HDMI cable consist of 99.99 % oxygen-free copper (CU). This high-quality cable construction allows for optimal signal transmission and higher breaking strength of the cable. For a perfect signal transmission, the HDMI plugs are equipped with gold-plated copper contacts and are housed in a resistant aluminium housing.
Selection of supported and tested resolutions:
- 7680*4320 @30Hz - 4:4:4 Color
- 7680*4320 @60Hz - DSC activated
Additional features:
- Enhanced Audio Return Channel (eARC)
- Variable Refresh Rate (VRR)
- Quick Media Switching (QMS)
- Quick Frame Transport (QFT)
- Auto Low Latency Mode (ALLM)
- Dynamic HDR Metadata (SMPTE ST 2094)
Technical data:
- HDMI 2.1 support, backward compatible with HDMI 2.0 and older versions
- Supports 8K / UHD-2 at 60Hz frequency (colour sampling 4:2:0 or DSC)
- Data rate: max. 38.4 Gbit/s (48 Gbit/s minus the overhead due to coding)
- Gold plated HDMI plug with gold plated copper contacts on both sides
- Plug with aluminium housing
- Conductor cross section: AWG 30/1
- Conductor material: copper (CU)
- Sheath material: Soft-PVC
- Outside diameter: 6 mm +/- 0.2 mm
- Shielding: 3-fold shielding (braided shield, foil shield, wire pair shielding)
Colour: Dark blue
Length: 0,5 m
Note:
Please note that higher color samples reduce the refresh rate. The maximum resolution may...
Alternative

HDMI 2.1 - Resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz.
With a bandwidth of max. 48 Gbit/s, this high-quality processed HDMI cable supports resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz (color sampling 4:2:0 or DSC) and meets all requirements of the HDMI 2.1 standard. In addition, 32 audio channels are supported at a sample rate / sampling rate of 1,536 kHz. Thus, all known audio formats can be processed, for example, also the spatial sound formats Dolby Atmos, DTS:X and Auro 3D.
High-quality cable construction.
The conductors of this triple-shielded HDMI cable are made of copper (CU). For flawless signal transmission, the HDMI connectors are equipped with gold-plated copper contacts. This high-quality cable construction allows for optimal signal transmission and higher break resistance of the cable.
Selection of supported and tested resolutions:
- 7680*4320 @30Hz - 4:4:4 Color
- 7680*4320 @60Hz - DSC enabled
Other features:
- Enhanced Audio Return Channel (eARC)
- Variable Refresh Rate (VRR)
- Quick Media Switching (QMS)
- Quick Frame Transport (QFT)
- Auto Low Latency Mode (ALLM)
- Dynamic HDR Metadata (SMPTE ST 2094)
Technical Specifications:
- HDMI 2.1 support, backward compatible with HDMI 2.0 and older versions
- Supports 8K / UHD-2 at a frequency of 60Hz (color sampling 4:2:0 or DSC)
- Data rate: max. 38.4 Gbit/s (48 Gbit/s minus overhead due to encoding)
- HDMI connector gold-plated on both sides with gold-plated copper contacts
- Conductor cross section: AWG 30/1
- Conductor material: Copper (CU)
- Jacket material: PVC
- Outer diameter: 6 mm +/- 0.2 mm
- Shielding: 3-fold shielded (braided shield, foil shield, wire pair shield)
Color: black
Length: 2.0 m
Note:
Please note that higher color samplings will reduce the refresh rate. The maximum resolution may vary depending on the hardware connected and the system used.

- Resolutions up to 8K / UHD-2 at 60Hz and 4K / UHD at 240Hz
- High quality cable construction, triple shielding and soft PVC cable jacket
- Supports Display Stream Compression (DSC) 1.2
SmartFLEX Technology
Due to the SmartFLEX soft PVC technology, these multimedia cables are highly flexible compared to conventional, rather stiff PVC cables. The special composition of the cable jacket enables very small bending radii and thus facilitates the installation or laying of the cables. In addition to greater flexibility, SmartFLEX series cables are also distinguished by their mechanical strength and long durability compared to standard cables, especially in applications where the cable moves (e.g. industrial applications or moving supports).
HDMI 2.1 - resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz
This high-quality processed HDMI cable supports resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz (colour sampling 4:2:0 or DSC) with a bandwidth of max. 48 Gbit/s and thus meets all requirements of the HDMI 2.1 standard. In addition, 32 audio channels are supported at a sample rate / sampling rate of 1,536 kHz. This means that all known audio formats can be processed, including the new surround sound formats Dolby Atmos, DTS:X and Auro 3D.
High quality cable construction
The conductors of this HDMI cable consist of 99.99 % oxygen-free copper (CU). This high-quality cable construction allows for optimal signal transmission and higher breaking strength of the cable. For a perfect signal transmission, the HDMI plugs are equipped with gold-plated copper contacts and are housed in a resistant aluminium housing.
Selection of supported and tested resolutions:
- 7680*4320 @30Hz - 4:4:4 Color
- 7680*4320 @60Hz - DSC activated
Additional features:
- Enhanced Audio Return Channel (eARC)
- Variable Refresh Rate (VRR)
- Quick Media Switching (QMS)
- Quick Frame Transport (QFT)
- Auto Low Latency Mode (ALLM)
- Dynamic HDR Metadata (SMPTE ST 2094)
Technical data:
- HDMI 2.1 support, backward compatible with HDMI 2.0 and older versions
- Supports 8K / UHD-2 at 60Hz frequency (colour sampling 4:2:0 or DSC)
- Data rate: max. 38.4 Gbit/s (48 Gbit/s minus the overhead due to coding)
- Gold plated HDMI plug with gold plated copper contacts on both sides
- Plug with aluminium housing
- Conductor cross section: AWG 30/1
- Conductor material: copper (CU)
- Sheath material: Soft-PVC
- Outside diameter: 6 mm +/- 0.2 mm
- Shielding: 3-fold shielding (braided shield, foil shield, wire pair shielding)
Colour: Dark blue
Length: 2 m
Note:
Please note that higher color samples reduce the refresh rate. The maximum resolution may...

- Polarisation: HH/HL/VH/VL
- Noise factor: < 0.1 dB
- Amplification: 56 dB
- Current consumption: 200 mA
- Input frequency: 10.7 GHz - 12.75 GHz
- Feed diameter: 40 mm
- 100% water resistance (tested)
- Pull-out weather protection
- UHD, 4K and 3D enabled
The Ankaro LNC 4000 Quad Premium with a feed diameter of 40 mm and a very low noise level of less than 0.1 dB has already been tested by leading institutes and rated VERY GOOD.
Top quality from ANKARO at a special price.
The LNC is suitable for receiving digital channels from any satellite, whether 4K, full HD, DTV or 3D. Thanks to its high-quality design and innovative technology, this LNC enables optimum reception of weak signals in peripheral areas. The seal on the LNC prevents moisture from penetrating. Thanks to the weather protection cap supplied, the connection is protected from all weather influences.
LNC for multi-switch operation

HDMI 2.1 - Resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz.
With a bandwidth of max. 48 Gbit/s, this high-quality processed HDMI cable supports resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz (color sampling 4:2:0 or DSC) and meets all requirements of the HDMI 2.1 standard. In addition, 32 audio channels are supported at a sample rate / sampling rate of 1,536 kHz. Thus, all known audio formats can be processed, for example, also the spatial sound formats Dolby Atmos, DTS:X and Auro 3D.
High-quality cable construction.
The conductors of this triple-shielded HDMI cable are made of copper (CU). For flawless signal transmission, the HDMI connectors are equipped with gold-plated copper contacts. This high-quality cable construction allows for optimal signal transmission and higher break resistance of the cable.
Selection of supported and tested resolutions:
- 7680*4320 @30Hz - 4:4:4 Color
- 7680*4320 @60Hz - DSC enabled
Other features:
- Enhanced Audio Return Channel (eARC)
- Variable Refresh Rate (VRR)
- Quick Media Switching (QMS)
- Quick Frame Transport (QFT)
- Auto Low Latency Mode (ALLM)
- Dynamic HDR Metadata (SMPTE ST 2094)
Technical Specifications:
- HDMI 2.1 support, backward compatible with HDMI 2.0 and older versions
- Supports 8K / UHD-2 at a frequency of 60Hz (color sampling 4:2:0 or DSC)
- Data rate: max. 38.4 Gbit/s (48 Gbit/s minus overhead due to encoding)
- HDMI connector gold-plated on both sides with gold-plated copper contacts
- Conductor cross section: AWG 28/1
- Conductor material: Copper (CU)
- Jacket material: PVC
- Outer diameter: 6 mm +/- 0.2 mm
- Shielding: 3-fold shielded (braided shield, foil shield, wire pair shield)
Color: black
Length: 3.0 m
Note:
Please note that higher color samplings will reduce the refresh rate. The maximum resolution may vary depending on the hardware connected and the system used.

- Polarisation: linear H/V
- Noise factor: < 0.1 dB
- Amplification: 56 dB
- Current consumption: 200 mA
- Input frequency: 10.7 GHz - 12.75 GHz
- Feed diameter: 40 mm
- 100% water resistance (tested)
- Pull-out weather protection
- UHD, 4K and 3D enabled
The Ankaro LNC 4004 Quad Premium with a feed diameter of 40 mm and a very low noise level of less than 0.1 dB has already been tested by leading institutes and rated VERY GOOD.
Top quality from ANKARO at a special price.
The LNC is suitable for receiving digital channels from any satellite, whether 4K, full HD, DTV or 3D. Thanks to its high-quality design and innovative technology, this LNC enables optimum reception of weak signals in peripheral areas. The seal on the LNC prevents moisture from penetrating. Thanks to the weather protection cap supplied, the connection is protected from all weather influences.
LNC for 4 subscriber connections

- Resolutions up to 8K / UHD-2 at 60Hz and 4K / UHD at 240Hz
- High quality cable construction, triple shielding and soft PVC cable jacket
- Supports Display Stream Compression (DSC) 1.2
SmartFLEX Technology
Due to the SmartFLEX soft PVC technology, these multimedia cables are highly flexible compared to conventional, rather stiff PVC cables. The special composition of the cable jacket enables very small bending radii and thus facilitates the installation or laying of the cables. In addition to greater flexibility, SmartFLEX series cables are also distinguished by their mechanical strength and long durability compared to standard cables, especially in applications where the cable moves (e.g. industrial applications or moving supports).
HDMI 2.1 - resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz
This high-quality processed HDMI cable supports resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz (colour sampling 4:2:0 or DSC) with a bandwidth of max. 48 Gbit/s and thus meets all requirements of the HDMI 2.1 standard. In addition, 32 audio channels are supported at a sample rate / sampling rate of 1,536 kHz. This means that all known audio formats can be processed, including the new surround sound formats Dolby Atmos, DTS:X and Auro 3D.
High quality cable construction
The conductors of this HDMI cable consist of 99.99 % oxygen-free copper (CU). This high-quality cable construction allows for optimal signal transmission and higher breaking strength of the cable. For a perfect signal transmission, the HDMI plugs are equipped with gold-plated copper contacts and are housed in a resistant aluminium housing.
Selection of supported and tested resolutions:
- 7680*4320 @30Hz - 4:4:4 Color
- 7680*4320 @60Hz - DSC activated
Additional features:
- Enhanced Audio Return Channel (eARC)
- Variable Refresh Rate (VRR)
- Quick Media Switching (QMS)
- Quick Frame Transport (QFT)
- Auto Low Latency Mode (ALLM)
- Dynamic HDR Metadata (SMPTE ST 2094)
Technical data:
- HDMI 2.1 support, backward compatible with HDMI 2.0 and older versions
- Supports 8K / UHD-2 at 60Hz frequency (colour sampling 4:2:0 or DSC)
- Data rate: max. 38.4 Gbit/s (48 Gbit/s minus the overhead due to coding)
- Gold plated HDMI plug with gold plated copper contacts on both sides
- Plug with aluminium housing
- Conductor cross section: AWG 30/1
- Conductor material: copper (CU)
- Sheath material: Soft-PVC
- Outside diameter: 6 mm +/- 0.2 mm
- Shielding: 3-fold shielding (braided shield, foil shield, wire pair shielding)
Colour: Dark blue
Length: 1 m
Note:
Please note that higher color samples reduce the refresh rate. The maximum resolution may...

- for feeding IP signals to existing coaxial cable networks
- Data transmission range from 5 to 204 MHz, may only be used if the forward travel frequency range starts from 258 MHz
- Net data rate: 1800 Mbps (PHY)
- 2 x RJ45 connections
- Wi-Fi for tablets, smartphones, notebooks etc.
- 128-bit AES encryption
- Includes external switching power supply

- Connection 1: Power cord safety plug Typ E+F (CEE 7/7, angled)
- Connection 2: Open end with crimp barrels
- Wire: H05-VV-F (3G), VDE approved
- Core cross-section: 1,00 mm²
- Number of cores: 3
- Max. current capacity: 10 A / 250 V
- Insulating material: PVC
- Jacket material: PVC
Color: White
Length: 5 m

- Connection 1: C14 (straight)
- Connection 2: C15 heat-device socket (straight)
- Wire: H05-V2V2-F (3G), VDE approved
- Core cross-section: 1,00 mm²
- Number of cores: 3
- Max. current capacity: 10 A / 250 V
- Insulating material: PVC
- Jacket material: PVC
Color: Black
Length: 3 m