REICHELT IE: Skating
The Best
CALLIOPE MINI3.0 - Calliope mini 3.0 - Starter Box
52.74 EUR
The Calliope mini is a microcontroller that is used as a teaching tool in school education for children from the third grade upwards, usually under adult supervision.The Calliope mini shows that everyone can code - and with a lot of fun. It's easy to get started, so kids, teachers* and parents can get started without any prior knowledge. From the first self-programmed blink to self-driving robots to wirelessly communicating Calliope mini swarms: with just a few clicks, users can design their own programs for the microprocessor on a connected computer, bringing the Calliope mini to life.
In addition to 25 red LEDs, one RGB LED and two programmable buttons, the board contains a combined position sensor with motion sensor and compass, as well as a wireless module that allows Calliope mini to communicate with other Calliope mini. The board can be
via laptop or computer using free editors, e.g. Open Roberta Lab from the Fraunhofer Gesellschaft. Self-created programs can also be transferred wirelessly via an app. The board is supplied with five pre-installed programs, the use of which is explained in a small accompanying booklet. Battery holders with high-quality batteries and a USB cable for connection to the computer are also included.
Caalliope Mini 3.0 (new) vs. 2.0 (predecessor)
With the Calliope mini V3, in addition to an improved processor architecture, additional and improved connectivity options have been added. There is a USB-C connector and additionally the pin header can be used directly with jumper cables or expansion boards. With Jacdac, another connector with reverse polarity protection is integrated. Thus, actuators and sensors can be connected in series and directly exchanged with a connected computer via WebUSB, for example.
The Calliope mini thus becomes not only the first teaching tool for learning programming, but also a digital circle for everyday school life!
Scope of delivery
• Calliope mini 3.0
• battery holder with batteries
• USB-C cable (1 m)
• rubber band (to fix the battery compartment)
• sticker
• quick start guide
external links
https://calliope.cc/calliope-mini/technische-daten
Top Pick
SOLDERED DEBO LIN 7329MST - Developer board - LIN Transceiver MASTER, NCV7329
21.84 EUR
"LIN (Local Interconnect Network) is a serial network protocol used for communication between components in vehicles. It serves as an alternative to the CAN bus and is characterized by a lower speed and the support of a smaller number of simultaneous devices, but also has significantly lower costs. LIN is used for communication between microcontrollers. The operating voltage is 18V.
This breakout has a MASTER role. Master/slave is a communication model in which one device (master) controls one or more other devices (slave) and the slave then responds to the commands it receives from the master. A master in the LIN protocol can control up to 16 devices.
Technical data
- max. data rate: 20 kbit/s
- max. number of devices: 16
- max. bus length: 40 m
- Voltage: 18 V
- Dimensions: 21.3 x 22.6 x 12.3 mm
external links
https://github.com/SolderedElectronics/LIN-Transceiver-NCV7329-MASTER-breakout-hardware-design"
Excellent
ARDUINO DUE - Arduino Due, AT91SAM3X8E, micro USB
50.36 EUR
A microcontroller board based on the SAM3X8E ARM Cortex-M3 from Atmel. This is the first Arduino™ board with a 32-bit microcontroller.This board contains all the key features to ensure you can start programming quickly and easily.
Unlike other Arduino™ boards, the board runs on a power supply of only 3.3 V.
This board features:
• 54 digital I/O interfaces (12 of which can be used as PWM output)
• 12 analogue inputs
• 4 UARTs
• 84 MHz clock
• USB OTG
• 2 D/A converters
• SPI header
• Power supply
• JTAG header
• Reset/erase button
Technical data:
• SAM3X8E ARM Cortex-M3
• Operating voltage: 3.3 V
• Digital inputs/outputs: 54
• Analogue inputs: 12
Recommended
"TNB UMTYREFL10 - Tire for E-Scooter, 10"""
46.54 EUR
"Solid 10"" tyre for E-ScooterThis E-Scooter tyre is compatible with all 10"" wheel E-Scooters.
The main characteristic is in its conception: a solid tyre does not need inner tube, and so is puncture-proof.
Moreover, the cells on the side increase the shock absorption effect and the comfort on the road.
Shock absorber and resistant, the solid tyre does not need any maintenance or repairs: Hit the road with serenity!
The tyre keeps the characteristics and performance of your E-Scooter : natural shock absortion, speed, battery life.
Compatibility
- Universal 10""
Composition
- Synthetic rubber
Featured
ADAFRUIT DEBO LED NP8 - Developer boards - NeoPixel-Stick with 8 WS2812 RGB-LEDs
18.21 EUR
"8 ultrabright LED Neopixels arranged in strips.- 8 individually addressable RGBs
- voltage range: 4 - 7 V
- Dimensions: 51 x 10 x 3.2 mm
Alternative
SEEED XIAO MG24 SEN - Xiao MG24 Sense, Matter/Thread/Zigbee/BLE
21.84 EUR
"The Seeed Studio XIAO MG24 Sense is an ultra-compact development board based on the Silicon Labs EFR32MG24 SoC. It combines powerful wireless connectivity with integrated sensors, making it ideal for IoT, edge AI and smart home applications. With support for protocols such as Matter, Thread, Zigbee and Bluetooth LE 5.3, as well as an integrated microphone and a 6-axis IMU sensor, it is ideal for projects requiring voice and motion detection.- Processor: ARM Cortex-M33 @ 78 MHz
- SoC: Silicon Labs EFR32MG24
- RAM: 256 KB
- Flash memory: 1536 KB internal + 4 MB SPI flash
- Wireless communication: Matter, Thread, Zigbee, Bluetooth LE 5.3, Bluetooth Mesh
- integrated sensors: Analog microphone, 6-axis IMU (LSM6DS3TR-C)
- GPIOs: 19 pins, all PWM-capable
- Analog inputs: up to 11
- Interfaces: 2× UART, 2× SPI, 1× I²C
- Power supply: 5 V via USB-C or 3.7 V LiPo battery
- Power consumption:
- Normal operation: 6.71 mA
- Sleep mode: 1.91 mA
- Deep sleep mode: 1.95 µA
- Dimensions (LxW): 21 × 17.8 mm
- Temperature range: -20 °C to 70 °C
- Special features: Integrated charging electronics (200 mA), user LED, reset button, integrated and U.FL antenna options
- Compatibility: Arduino IDE, Zephyr RTOS
Combining powerful wireless connectivity and integrated sensors, the XIAO MG24 Sense enables the development of advanced IoT applications that require voice and motion detection. Its compact design and low power consumption make it ideal for use in portable devices and battery-powered systems.
A versatile development board for developers looking for a compact and powerful solution for modern IoT and edge AI applications.
External links
https://wiki.seeedstudio.com/xiao_mg24_getting_started/"
ARD NIC SEN ENV - Arduino Pro Nicla Sense Env, Renesas RA2E1
52.95 EUR
"Start sensing the world around you with the Nicla Sense Env. This board combines three state-of-the-art sensors from Renesas with the easy integration and scalability of the Arduino ecosystem.Expand your Portenta or MKR projects by adding the Nicla Sense Env. In addition to a particularly low-power temperature and humidity sensor, two intelligent, industrial-grade gas sensors are integrated that can measure air quality in both indoor and outdoor areas.
Thanks to its compact size (22.86 x 22.86 mm) and robust design, the board is ideal for projects that need to combine sensor fusion and the high computing power of the Portenta family.
Application examples
- Air quality, humidity and temperature monitoring in air conditioning or ventilation systems
- Support for automatic air purification and fume detection systems
- Monitoring of toxic substances in industrial processes, including CO2 and VOCs
- Easy integration into Arduino development projects to add sensors to monitor environmental data
Technical specifications
- Microcontroller:
- Renesas RA2E1 ARM® Cortex® M23 (not user programmable)
- Clock frequency: up to 48 MHz
- Memory:
- SRAM: 16 KB
- Flash memory: 128 KB, for internal storage of sensor data and firmware instructions
- Dimensions:
- Size: 22.86 x 22.86 mm
- Weight: 2 g, ideal for compact and portable applications
- Sensors:
- HS4001: energy-saving sensor for relative humidity and temperature
- ZMOD4410AI1V: Gas sensor for indoor air quality (TVOC detection) with integrated AI
- ZMOD4510AI1V: Gas sensor for NO2 and O3 for monitoring outdoor air quality with AI support
- Power supply: Power supply via a connected Arduino Portenta or MKR board
- Interfaces:
- I2C bus: via ESLOV connector
- Serial interface: for additional data communication
- SPI: fast and flexible data transfer for peripheral devices
- Analog inputs (ADC): two ADC channels
- Programmable I/O voltage: from 1.8V to 3.3V
- Interface options:
- ESLOV interface: for easy Arduino integration
- Header and connection pins (castellated pins): facilitates integration into Arduino projects
Useful external links
• https://docs.arduino.cc/ (documentation)
• https://forum.arduino.cc/ (Forum)"
SEEED XIAO MG24 - Xiao MG24, Matter/Thread/Zigbee/BLE
19.24 EUR
"The Seeed Studio XIAO MG24 is an ultra-compact, energy-efficient development board based on the Silicon Labs EFR32MG24 SoC. With a 78 MHz ARM Cortex-M33 processor, integrated AI/ML hardware accelerator and support for modern IoT protocols such as Matter, Thread, Zigbee and Bluetooth LE 5.3, it is ideal for battery-powered smart home, sensor and edge AI applications.- Processor: ARM Cortex-M33 @ 78 MHz
- SoC: Silicon Labs EFR32MG24
- RAM: 256 KB
- Flash memory: 1536 KB internal + 4 MB SPI flash
- Wireless communication: Matter, Thread, Zigbee, Bluetooth LE 5.3, Bluetooth Mesh
- Antenna options: integrated ceramic antenna and U.FL connector for external antenna
- GPIOs: 19 pins, all PWM-capable
- Analog inputs: up to 11
- Interfaces: 2× UART, 2× SPI, 1× I²C
- Power supply: 5 V via USB-C or 3.7 V LiPo battery
- Power consumption:
- Normal operation: 6.71 mA
- Sleep mode: 1.91 mA
- Deep sleep mode: 1.95 µA
- Dimensions (LxW): 21 × 17.8 mm
- Temperature range: -20 °C to 70 °C
- Special features: integrated charging electronics (200 mA), user LED, reset button
- Compatibility: Arduino IDE, Zephyr RTOS
The XIAO MG24 offers a powerful platform for modern IoT applications. Thanks to its support for current communication standards and the integrated AI/ML accelerator, it is particularly suitable for projects that require local data processing and wireless connectivity. Its compact design and low power consumption make it ideal for use in portable devices and battery-powered systems.
A versatile development board for developers looking for a compact and powerful solution for modern IoT and edge AI applications.
External links
https://wiki.seeedstudio.com/xiao_mg24_getting_started/"
SOLDERED DEBO LED PIXEL - Developer boards - LED, Pixel, WS2812B
10.83 EUR
"The small LEDs, which have an integrated circuit (IC) of type WS2812, offer remarkable functionality by being able to light up in up to 16 million colors. Each of these LEDs can be controlled individually, allowing precise control of color and brightness.- have an integrated WS2812 IC that enables a color selection from 16 million colors
- individually controllable via a one-wire interface
- enables thousands of LEDs to be controlled via just one wire
- easy control via Arduino (or a compatible board such as Dasduino)
- minimal effort for impressive lighting effects
The use of these LEDs makes it possible to achieve extraordinary lighting effects with little effort. By combining several of these pixels, dynamic and customizable light installations can be created. Simple control through an Arduino-compatible board such as Dasduino facilitates the implementation of complex projects that can range from interactive art installations to custom lighting solutions.
Technical specifications
- Color: Red/Green/Blue
- Voltage: 5 V
- Power: max. 60 mA per pixel
- Diode: WS2812 SMD LED (5050 LED diode with integrated IC)
- Dimensions: Diameter of 10 mm
In conclusion, these LEDs with integrated WS2812 IC offer high flexibility and ease of use for developers and designers who want to create powerful and customizable lighting systems. The ease of implementation and the ability to control thousands of LEDs via a single interface make them an ideal choice for creative and technical projects.
External links
https://github.com/SolderedElectronics/Soldered-WS2812-Smart-Leds-Arduino-Library
https://github.com/SolderedElectronics/Smart-LED-WS2812B-Pixel-hardware-design"