REICHELT IE: Network antennas
The Best

Specification
- WLAN/Bluetooth antenna internal
- Connector: Miniature RF Coaxial Connector MHF (I-PEX), U.FL (Hirose)
- Impedance: 50 Ohm
- Length: 60 mm (1,13 mm)
- Frequency range: 2,4 - 2,5 GHz
- Maximum gain: < 3 dBi
- Average gain: > -5 dBi
- Operating temperature: -10 °C - 55 °C
- VSWR ( voltage standing wave ratio ) 2,0:1 max.
- Dimension: 25x 6x 6,3 mm
Package content
- WLAN/Bluetooth antenna internal
Package
Poly Bag
Top Pick

- Element 1: 617 - 960 MHz, 1710 - 6000 MHz
- Element 2: 617 - 960 MHz, 1710 - 6000 MHz
- Element 3: 617 - 960 MHz, 1710 - 6000 MHz
- Element 4: 617 - 960 MHz, 1710 - 6000 MHz
- Element 5: 2400/4900 - 6000 MHz
- Element 6: 2400/4900 - 6000 MHz
- Element 9: 1562 - 1612 MHz (GPS, GNSS)
Gain:
- Element 1&4 @617 - 960 MHz 4 dBi
- Element 1&4 @1710 - 3800 MHz 8 dBi
- Element 1&4 @4900 - 6000 MHz 9 dBi
- Element 5 - 6 @2400 MHz 9 dBi
- Element 5 - 6 @4900 - 6000 MHz 9 dBi
- Element 7 @1562 - 1612 MHz (GPS, GNSS) 26 dB LNA
Typical efficiency:
- Element 1&2: 70%
- Element 3 - 5: 80%
- Insulator:
LTE >10 dB
Wi-Fi >12 dB
Resistance: 50 ohms
- Dimensions: height 75 mm/diameter 180 mm
- Colour: black
- Mounting: single-hole mounting (19 mm)
- Cable type: 3x SR1-174-FRZH
- Cable length: 0.3 m
- Plug:
SMA plug (m) [4G/5G]
SMA plug (m) reverse [Wi-Fi]
FME connector (f) [GPS]
Excellent

- Pair of outdoor omni-directional dual band antennas
- 2.4 GHz: 5 dBi
- 5 GHz: 7 dBi
- N-Type male connector
- Compatible with 802.11ac/n/g/b/a routers and access points with N-Type female connectors
TRENDnet's 5/7 dBi Outdoor Dual Band Omni Antenna Kit, model TEW-AO57, comes with a pair of high performance outdoor antennas which support 2.4 and 5 GHz radio transmissions.
The omni-directional antennas provide blanket wireless coverage and have N-Type male connectors.
The antennas work with 802.11ac/n/g/b/a routers and access points with N-Type female connectors.
Package Contents:
- TEW-AO57 (2 x antennas)
- Quick Installation Guide
Recommended

Specification
• Connector: SMA plug
• With flexible joint, rotatable
• Frequency range: 2.4000 ~ 2.4835 GHz,
5.1500 ~ 5.7250 GHz
• Gain: 1.5 dBi @ 2.5 GHz
2.1 dBi @ 5.7 GHz
• Impedance: 50 Ohm
• VSWR: 2.0 max.
• Operating temperature: -20 °C ~ 65 °C
• Length with flexible joint ca. 108 mm, without flexible joint ca. 82.5 mm
• Diameter: 7.8 mm (Ø peak)
10.0 mm (Ø SMA)
System requirements
• Device with a free SMA connector
Package content
• Antenna
Featured

Dual band WiFi omnidirectional antenna with 360° beam width and 4x4 MIMO
The weather-proof LANCOM AirLancer ON-Q360ag omnidirectional antenna enables the effective WiFi coverage of a large area.
Mounted centrally, it is ideal for achieving 360° coverage.
Thanks to 4x43 MIMO support, it provides the highest performance in the WiFi standard IEEE 802.11ac.
In addition, it is ideally suited for parallel operation in the 5 GHz band with 2x2 MIMO and in the 2.4 GHz band with 2x2 MIMO in combination with dual radio access points.
- WiFi omnidirectional antenna with 360° radiation pattern and +4 dBi (2.4 GHz & 5 GHz)
- 4x4 MIMO technology for reliable WiFi coverage in challenging environmental conditions
- 2x2 + 2x2 MIMO operation with LANCOM dual radio access points for parallel operation at 2.4 and 5 GHz
- Includes mounting kit, cable and adapter
- Connection of LANCOM indoor access points via the AirLancer AN-RPSMA-NJ adapter
What's special:
The different LANCOM outdoor antennas can also be connected to LANCOM indoor access points with the AirLancer AN-RPSMA-NJ adapter.
Alternative

Specification
- WLAN antenna external
- N jack
- Frequency range: 2.4 ~ 2.5 GHz
- Gain: 8 dBi
- VSWR: 2.0 max.
- Impedanz: 50 Ohm
- Operating temperature: -20 °C ~ 65 °C
- Radome material: glass fiber, UV resistant
- Length: 510 mm
- Ø: 79.5 mm
- Survival wind speed: 216 km/h
- Protection class: IP65
- With wall mount 90°
- With mast mounting kit for stainless steel pipes up to 55 mm Ø
Package content
- WLAN antenna
- Mast mounting kit

Technical data
- Connector: SMA plug
- LTE band: 1/3/7/9/20
- Frequency range: 698 - 791/824 - 960/1710 - 2170/2300 - 2400/2500 - 2700 MHz
- GSM/UMTS
- ZigBee 868 - 870 MHz, 902 - 928 MHz
- Aerial gain: 0 - 4 dBi
- Impedance: 50 ohm
- VSWR: 4.0:1 max.
- Operating temperature range: -10°C - 55°C
- Enclosure material: UV-protected ABS
- Dimensions (LxWxH): 231.5x21.50x6.8 mm
- SMA diameter: 13.2 mm

Specification
• Connector: 1 x SMA plug
• Frequency range:
698 MHz - 960 MHz
1710 MHz - 2170 MHz
2500 MHz - 2700 MHz
• ZigBee, LoRa, DECT, Z-Wave, NB-IoT, Bluetooth, GSM, UMTS, LTE, ISM, WLAN 2.4
GHz
• Antenna gain: 5 - 7 dBi
• Impedance: 50 Ohm
• VSWR: 1.5
• Polarisation: linear, vertical
• Operating temperature: -20 °C ~ 70 °C
• Housing material: metal
• Colour: black
• Protection class: IPx5
• Colour: black
• Cable: coaxial
• Cable type: RG-58
• Cable colour: black
• Cable attenuation: 0.6 dB @ 1 GHz per meter
• Cable diameter: ca. 4.95 mm
• Cable length incl. connector: ca. 3 m
• Dimensions (LxD): ca. 56.3 x 4.5 mm
System requirements
• Device with a free SMA connector
Package content
• Antenna
Package
• Box

- Element 1: 617 - 960 MHz, 1710 - 6000 MHz
- Element 2: 617 - 960 MHz, 1710 - 6000 MHz
- Element 3: 617 - 960 MHz, 1710 - 6000 MHz
- Element 4: 617 - 960 MHz, 1710 - 6000 MHz
Gain:
- Element 1 - 4 @617 - 960 MHz 4 dBi
- Element 1 - 4 @1710 - 3800 MHz 8 dBi
- Element 1 - 4 @4900 - 6000 MHz 9 dBi
- Typical efficiency:
- Element 1&2: 70%
- Element 3 - 5: 80%
- Insulator: LTE >10 dB
- Resistance: 50 ohms
- Dimensions: height 75 mm/diameter 180 mm
- Colour: white
- Mounting: single-hole mounting (19 mm)
- Cable type: 3x SR1-174-FRZH
- Cable length: 0.3 m
- Plug:
SMA plug (m) [4G/5G]

Specification
- WLAN Antenna extern With flexible joint, rotatable
- Bluetooth
- RP-SMA plug
- Frequency range: 2,4 GHz
- Peak gain: 9 dBi
- VSWR: 2,0
- Impedance: 50 Ohm
- Housing material: ABS UV protected
- Operating temperature: -10 °C - 55 °C
- length With flexible joint 384,1 mm, without flexible joint 352,1 mm
- Ø: 12,6 mm (Ø top), 13,5 mm (Ø Fuß)
Package content
- WLAN Antenna
Package
Poly Bag

Specification
- WLAN Antenna externally With flexible joint, rotatable
- RP-SMA Plug
- Frequency range:
5,1500 - 5,8750 GHz
- Peak gain: 3 - 5 dBi
- VSWR: 2,0 max.
- Impedance: 50 Ohm
- Operating temperature: -10 °C - 55 °C
- length With flexible joint 182,00 mm
- wight: 21,60 mm
- Ø: 13,50 mm (RP-SMA)
Package content
- Antenna
Package
Poly Bag

- New advanced metamaterial technology
- Exceptional performance over the main 4G/5G bands
- High Gain for the antenna size
- Wideband 2×2 MIMO 4G/5G antenna
- Backwards compatible 2G/3G/4G/LTE antenna (5G Ready)
- Two cross polarised antennas in one enclosure for optimal LTE performance
- IP65 weather/dust and vandal resistant enclosure
The XPOL-2-5G is Poynting’s third generation ''V3'' of this very popular Cross Polarised (XPOL), cellular band, 2×2 MIMO antenna.
The antenna enclosure effectively looks the same as the second generation ''V2'' but has been completely redesigned on the inside.
We have used advanced metamaterial technology, making use of Artificial Magnetic Conductors (AMC) and new registered/patent pending radiator configuration, which is proving to yield exceptional improvements in bandwidth and gain.
Radiation patterns of this antenna are exceptionally well controlled, further adding to the performance of the antenna.
The XPOL-2-5G antenna includes the newer 3400 - 3800 MHz bands, which were not previously covered by our V2 and is suitable for 2G, 3G, 4G & 5G.
This antenna performs exceptionally well in the following frequency bands: 698 - 960MHz, 1700 - 2170MHz, 2300 - 2700MHz & 3400 - 3800MHz.
In addition to the new bands, the gain in the 1700MHz and 2.7GHz is around 3dB higher than the ''V2'' over the same frequency bands!
Our ''V2'' antenna already outperformed most competitors over these bands, so this substantial improvement in gain shows the benefits of the new advanced materials and novel radiator design.
So, if it was a car, we installed an entirely new technology engine producing twice the power under the bonnet - it may look the same, but just wait until you turn the ignition on!

Specification
- Connector: 1 x MHF® I plug
- Frequency range: 2400 MHz - 2500 MHz / 5150 MHz - 5875 MHz
- Bluetooth, WLAN 2.4 / 5.0 GHz, ZigBee 2.4 GHz, ISM
- Antenna gain: 1.6 dBi
- Impedance: 50 Ohm
- VSWR: 2.5
- Operating temperature: -10 °C ~ 55 °C
- Cable type: coaxial
- Cable type: 1.13
- Cable colour: black
- Cable diameter: ca. 1.13 mm
- Cable attenuation: 3.2 dB @ 2.4 GHz per meter
- Smallest bending radius: 4.5 mm
- Dimensions (LxWxH): ca. 21.5 x 7.0 x 6.0 mm
- Length incl. connectors (L): ca. 23 cm
System requirements
- Device with one free MHF® I port
Package content
- Antenna

- Connectors: 1 x RP-SMA plug
- Frequency range: 5.150 - 5.850 GHz
- Antenna gain: 5 dBi
- Impedance: 50 Ohm
- Polarisation: linear, vertical
- VSWR: 2.2
- Operating temperature: -10 °C ~ 70 °C
- Colour: black
- Length: ca. 200 mm (with tilt joint) / ca. 177 mm (without tilt joint)
- Diameter: ca. 12.70 mm (RP-SMA)
System requirements
- Device with a free RP-SMA jack
Package content
- WLAN antenna

Universal mast bracket for mounting the LTE Duo sets

Technical data
- PCB LTE internal aerial
- Connector: compatible with miniature HF coaxial plug MHF (I-PEX), U.FL (Hirose)
- Frequency range:
791 - 960 MHz,
1710 - 2170 MHz,
2500 - 2700 MHz - Aerial gain: 2 - 3.5 dBi
- Cable length: 150 mm
- Cable diameter: 1.13 mm
- Cable type: coaxial
- Operating temperature range: -10°C - 55°C
- Dimensions (LxWxH): 45 x 33 x 0.8 mm
System requirements
• Device with connector compatible with MHF (I-PEX), U.FL (Hirose)

- Exceptional performance over the main 4G/5G bands
- High gain for the antenna size
- Wideband 2X2 or 4X4 MIMO 4G/5G antenna
- Backwards compatible 2G/3G/4G/LTE antenna (5G Ready)
- Weather, dust and vandal resistant enclosure (IP 65)
The XPOL-1-5G is Poynting’s second generation ''V2'' of this very popular Cross Polarised (XPOL), cellular band, 2×2 MIMO antenna.
The addition of a 4X4 MIMO derivative is also available for user specific needs.
The antenna has been completely redesigned form the previous generation with an all new enclosure and antenna design.
The antenna now includes the newer 3400 - 3800 MHz bands as well as the in demand lower 698 MHz band, which were not previously covered by our V1 and is suitable for 2G, 3G, 4G & 5G.
This antenna performs exceptionally well in the following frequency bands: 698 - 960 MHz, 1700 - 2170 MHz, 2300 - 2700 MHz & 3400 - 3800 MHz, with a peak gain of 4 dBi across the frequency bands of operation.

Dual band WiFi omnidirectional antenna with 360° beam width and 1x1 MIMO
The weather-resistant LANCOM AirLancer ON-360ag omnidirectional antenna enables the effective WiFi coverage of a large area.
Mounted centrally, it is ideal for achieving 360° coverage in simple WiFi applications.
- WiFi omnidirectional antenna with 360° radiation pattern and +6.5 dBi (2.4 GHz) or +6 dBi gain (5 GHz)
- 1x1 MIMO technology for reliable WiFi coverage in simple WiFi applications
- Includes mounting kit, cable and adapter
- Connection of LANCOM indoor access points via the AirLancer AN-RPSMA-NJ adapter
What's special:
The different LANCOM outdoor antennas can also be connected to LANCOM indoor access points with the AirLancer AN-RPSMA-NJ adapter.
Network antennas REICHELT IE Best Products

Specification
• Connector: SMA plug
• LTE Band: 1/2/3/4/5/6/7/8/9/10/12/13/14/15/16/17/18/19/20/23/25
• Frequency range: 698-787 / 791-960 / 1710-2170 / 2500-2700 Mhz
• GSM/UMTS
• ZigBee 868~870 MHz, 902~928 MHz, 2405~2480 MHz
• Gain: 2 ~ 4 dBi
• Impedance: 50 Ohm
• VSWR: 2.0:1 ~ 4.0:1 max.
• Cable type: coax ULA 100
• Cable attenuation: 1.40 dB @ 2.500 GHz
2.30 dB @ 5.875 GHz
• Cable length: ca. 1 m
• Cable colour: black
• Operating temperature: -10°C ~ 55°C
• Housing: ABS UV resistant
• Dimensions antenna (LxWxH): ca. 162 x 66 x 18 mm
• Dimensions stand (LxWxH): ca. 80 x 77 x 15 mm
System requirements
• Device with free SMA connector
Package content
• LTE antenna with stand
Package
• Box

Technical data
• RP-SMA screw terminal
• With joint, swivelling
• Frequency range 2.4 GHz, 5.8 GHz
• Amplification: 5 dBi
• Operating temperature: -20°C to 65°C
• Length with joint 195 mm, without joint 165 mm
• Ø 6 mm (Ø tip) x 12.5 mm (Ø SMA)
Package contents
• WIFI aerial RP-SMA

Specification
- Connector: Miniature RF coaxial plug MHF IV/ HSC MXHP32 compatible
- PIFA: Planar Inverted F-Shaped Antenna
- Frequency range:
- Antenna gain:
- Impedance: 50 Ohm
- VSWR: 2.5
- Operating temperature: -10 °C ~ 55 °C
- Dimensions: (LxWxH): ca. 21.5 x 6.0 x 7.0 mm
- Cable category: coaxial
- Cable colour: black
- Cable attenuation: 2.5 dBi @ 2400 MHz per meter
- Cable diameter: ca. 1.13 mm
- Cable length incl. connectors: ca. 12.0 cm
2.400 - 2.500 GHz
5.150 - 5.875 GHz
1.6 dBi maximal
-4.0 dBi average
System requirements
- Device with a free MHF IV/ HSC MXHP32 compatible connector

Technical data
- SMA plug, screw connection
- With joint, swivelling
- Frequency range: 824 ~ 894 MHz, 1920 ~ 2170 MHz
- Peak gain: 0.5 ~ 2.0 dBi, 3 ~ 4.5 dBi
- VSWR: 3.0: 1 max. 2.0: 1 max.
- Polarisation: linear, vertical
- Impedance: 50 Ohm
- ABS UV-protected
- Operating temperature: -10°C to +55°C
- Length with joint: 296.10 mm
System requirements
• LTE device with SMA socket

Specification
- Connector: 1 x SMA plug
- Frequency range: 850 - 960 MHz.1700 - 2700 MHz
- ZigBee, Bluetooth, WLAN 2.4 GHz, DECT, Z-Wave, LoRa 868 MH/z / 915 MHz
- Antenna gain: 5 dBi
- Impedance: 50 Ohm
- Polarisation: linear, vertical
- Transmission power: 10 W
- Operating temperature: -30 °C ~ 70 °C
- Colour: black
- Antenna length including magnetic base: ca. 241 mm
- Cable: coaxial
- Cable type: RG-174 A/U
- Cable colour: black
- Cable loss: 1.5 dB @ 1.5 GHz per meter
- Cable diameter: ca. 2.7 mm
- Cable length incl. connector: ca. 3 m
- Diameter magnetic base: ca. 29.4 mm
System requirements
• Device with a free SMA jack

Specification
- Connector: 1 x SMA plug
- Frequency range: 700 - 960 MHz, 1710 - 2690 MHz
- GSM, UMTS, Bluetooth, WLAN 2.4 GHz, ZigBee, DECT, Z-Wave, LoRa 868 MHz / 915 MHz
- Antenna gain: 7 dBi
- Impedance: 50 Ohm
- Polarisation: vertical
- VSWR: 2.0
- Transmission power: 50 W
- Operating temperature: -30 °C ~ 70 °C
- Colour: black
- Antenna length including magnetic base: ca. 465 mm
- Cable: coaxial
- Cable type: RG-58
- Cable colour: black
- Cable attenuation: 0.6 dB @ 1 GHz per meter
- Cable diameter: ca. 4.95 mm
- Cable length incl. connector: ca. 3 m
- Diameter magnetic base: ca. 80.0 mm
System requirements
- Device with a free SMA jack
Package content
- LTE antenna
Package

Technical data
- LTE band: 1, 3, 7, 20
- GSM/UMTS/WIFI 2.4 GHz
- Frequency ranges: 790 - 870 MHz, 1710 - 2690 MHz
- Gain: 2 dBi
- Polarisation: linear, vertical
- Impedance: 50 Ohm
- VSWR:
2.0 max. @ 750~960 MHz/1710~2170 MHz
3.0 max. @ 2400~2700 MHz - Dimensions:
Height: 48 mm
Ø 50 mm - Screw-mounted:12 mm central bore
- Cable length: 3 m
- Cable type: RG-174
- Cable connector: SMA plug
- Operating temperature: -10°C ~ 55°C
- ABS UV-protected
- IP 67

Specification
- Connector: 1 x SMA plug
- Frequency range: 700 - 960 MHz, 1710 - 2700 MHz
- GSM, UMTS, Bluetooth, WLAN 2.4 GHz, ZigBee, DECT, Z-Wave, LoRa 868 MH/z / 915 MHz
- Antenna gain: 5 dBi
- Impedance: 50 Ohm
- Polarisation: vertical
- VSWR: 2.0
- Operating temperature: -30 °C ~ 70 °C
- Colour: black
- Antenna length including magnetic base: ca. 311.5 mm
- Cable: coaxial
- Cable type: RG-174
- Cable colour: black
- Cable attenuation: 1.5 dB @ 1.5 GHz per meter
- Cable diameter: ca. 2.7 mm
- Cable length incl. connector: ca. 3 m
- Diameter magnetic base: ca. 29.0 mm
System requirements
- Device with a free SMA jack
Package content
- LTE antenna
Package
- Poly bag

Technical data
- LTE band 1/2/3/7/8/13/17/20
- 1920 ~ 2170 MHz(1), peak gain 1.7 ~ 2.3 dBi
- 1710 ~ 1880 MHz (3), peak gain 1.8 ~ 3.0 dBi
- 2500 ~ 2690 MHz (7), peak gain 2.0 ~ 2.7 dBi
- 880 ~ 960 MHz (8), peak gain 0.6 ~ 0.5 dBi
- 746 ~ 787 MHz (13), peak gain 0.3 ~ 0.9 dBi
- 704 ~ 746 MHz (17), peak gain 0.3 ~ 0.7 dBi
- 791 ~ 862 MHz (20), peak gain - 0.8 ~ 0.2 dBi
- GSM
- UMTS
- WIFI 2.40 GHz
- Bluetooth
- SMA plug
- With joint, swivelling
- Polarisation: linear, vertical
- Impedance: 50 Ohm
- ABS UV resistant
- Operating temperature: -10°C ~ 55°C
- Length:
With joint:135.00 mm
Without joint: 107.00 mm
Ø: 19.00 mm (tip)
10.20 mm (base SMA)
Package contents
• Aerial

- 5-in-1 high performance multi-frequency 2G/3G/4G/LTE/5G antenna
- 2X2 MIMO LTE, 2X2 MIMO WLAN and GPS / GLONASS
- Ultra-wideband, includes 450 MHz and 3.5 GHz CBRS bands
- Robust and waterproof antenna (IP 69K)
- Ideal for transportation and use at sea
- Multiple mounting options for easy installation
The MIMO-3-15 is a 5-in-1 high performance multi-frequency antenna in a single housing, offering two cellular, two WLAN and one GPS/GLONASS antenna.
The two cellular MIMO antennas (for 2G/3G/4G) cover the modern 617 MHz to 2700 MHz bands as well as the new LTE and 5G spectrum for 450 MHz and 3.5 GHz CBRS bands, which is becoming increasingly popular in the various international mobile network operators for LTE.
The antenna's ultra-wideband performance allows it to be used by different operators and technologies and is ready for future mobile technologies up to 3.8 GHz for 5G applications.
The antenna has two separate dual-band WLAN antennas that simultaneously provide 2.4 GHz and 5 GHz with 2×2 MIMO capability on each antenna.
The fifth antenna is a powerful active GPS/GLONASS system that works down to -40 °C.
The MIMO-3-15 outperforms most competitors due to the attention paid to the design of this high performance antenna.
The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation capabilities at the desired height.
This is an important criterion for the transportation and marine market for which the antenna was specifically designed.
Main applications are commercial/industrial vehicles, marine, M2M and other IoT systems that utilize a wide range of radio technologies while remaining future-proof across the wide frequency band.
Technical details
- 410 - 470 MHz
- 617 - 960 MHz
- 1427 - 1517 MHz
- 1710 - 2700 MHz
- 3400 - 3800 MHz
- LTE: 5.8 dBi
- Wi-Fi: 7 dBi
- GPS: 21 dBi
- Omnidirectional
- 410 - 470 MHz
- 4G LTE
- 5G
- CBRS band
- 2x2 MIMO
- 2.4 - 2.5 GHz
- 5.0 - 7.2 GHz
- Chemical protection
- IP 69K
- GPS

Technical data
- Connector: SMA plug
- LTE Band: 1 - 10, 12 - 20, 23, 25
- Frequency range: 698 - 791, 824 - 960, 1710 - 2170, 2400 - 2500, 2570 - 2700, 5150 - 5875 MHz
- Bluetooth / GSM / UMTS / WIFI dual band / ZigBee
- Aerial gain: 1 - 4 dBi
- Impedance: 50 ohm
- VSWR: 2.5:1 - 5.0:1
- Operating temperature: -10°C - 55°C
- Enclosure material: ABS, UV-protected
- Dimensions: (LxWxH): approx. 156.16 x 39.78 x 13.50 mm
- SMA diameter: approx. 13.5 mm
System requirements
- Device with a free SMA connector

Specification
- Connectors: 2 x miniature RF coaxial plug MHF IV (IPEX), MXHP32 (HSC) compatible
- Frequency range: 2400 - 2500 MHz,5150 - 5875 MHz
- Antenna gain: 5 dBi
- Impedance: 50 Ohm
- Cable type: coaxial
- Cable attenuation: 3.20 dB @ 2.4 GHz per meter, 5.05 dB @ 5.0 GHz per meter
- Cable diameter: ca. 1.13 mm
- Cable length incl. connectors: ca. 250 mm
- Operating temperature: -10 °C ~ 50 °C
- Dimensions (LxWxH): ca. 61.6 x 7.0 x 1.6 mm
System requirements
• Device with two free MHF IV connectors

Improved version with solid swivel mast clamp for horizontal or vertical mounting up to 55 mm mast
- F-connector (incl. F-connector + rubber grommet)
- 1 element, dipole
- Frequency range: 174 - 230 MHz
- Gain 2.2 dBi
- dimensions 74 x 41 x 25 cm
Package Contents:
- Antenna
- F-connector
- Rubber grommet
- short manual

Technical data
• WIFI external aerial with joint, swivelling
• RP-SMA plug
• Frequency range: 2.4 ~ 2.5 GHz, 4.9 ~ 5.875 GHz
• Aerial gain: 3 dBi
• VSWR 2.0 max.
• Impedance: 50 ohm
• Operating temperature: -10°C ~ 55°C
• Length with joint 158.4 mm
Without joint 125.9 mm
• Ø: 7.4 mm (Ø tip)
13.5 mm (Ø base)
Package contents
• WIFI aerial

- Supports MiMo & diversity across 3G,4G & 5G
- Two wideband elements with gain
- Durable wall mount housing
- Suitable for mast, wall and desk mounting

- Logarithmic-periodic antenna for all bands
- Duo Set for LTE (MIMO)
- covers frequencies from 790 - 2700 MHz
- 56 elements
- Gain 9-11.5 dB
- 10 m coaxial cable pre-assembled
- SMA connector
- length 980 mm
- 5x cable ties included
- Mounting in horizontal and vertical polarization
- For LTE 800 / LTE 1800 / LTE 2600 / UMTS (3G) / GSM 900 / GSM 1800 / WI-FI (WLAN)
The SMA connection is solved directly on the cable or via an adapter from FME to SMA (enclosed if necessary).
ATTENTION!
Picture shows mounted application example - delivery without shown ''U'' universal mount! Please order separately!

Specification
- RP-SMA screw interface male
- Splash proof
- Frequency range: 2,4000 - 2,4835 GHz, 5,1500 - 5,7250 GHz
- Peak gain: 1,5 dBi @ 2,5 GHz, 2,1 dBi @ 5,7 GHz
- Impedance: 50 Ohm
- VSWR: 2,0 max.
- Operating temperature: -20 °C - 65 °C
- Dimension: 89 mm (length)x 7,8 mm (Ø top)x 10 mm (Ø SMA)
Package content
- WLAN Antenna
Package
Poly Bag

Technical details
- Connector: SMA plug
- Frequency range:
824 - 960 MHz
1,920 - 2,170 MHz - Gain: 3 dBi
- Impedance: 50 Ohm
- VSWR: 2.0
- Polarisation: linear, vertical
- Operating temperature: -10 °C ~ 75 °C
- Cable colour: black
- Cable type: RG-174
- Cable length incl. connectors: ca. 2 m
- Antenna length: ca. 21.5 cm
- Antenna length including magnetic base: ca. 25 cm
- Diameter (base): ca. 3 cm
System requirements
- Device with one free SMA jack
Package content
- Antenna
Package
- Retail Box

- Integrated Outdoor Multi-Band High-Power LTE directional Antenna
- Outdoor Wi-Fi Omni-Antenna
- Place to install Teltonika RUT240 or RUT230 (All-in-One)
- Up to 6 dBi LTE Antenna Gain
- IP67
- Passive-PoE Support
QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas.
It is dedicated to connections with long distance to base station.
It is designed to have Teltonika RUT240 or RUT230 router installed inside IP67 enclosure.
It is the first choice for fixed installations in industrial environment.
It has embedded also outdoor Wi-Fi omni antennas.
NOTE: For RUT230 one LTE antenna is unplugged.

Specification
- WLAN antenna internal
- PIFA Planar Inverted F-Shaped Antenna
- Connector: Miniature RF Coaxial Connector MHF (I-PEX), U.FL (Hirose) compatible
- Length: 134 mm
- Cable diamete 1,13 mm
- Cable type: coaxial
- Frequency range: 2,400 - 2,500 GHz, 5,150 - 5,875 GHz
- Impedance: 50 Ohm
- Peak gain max.: < 1,6 dBi
- Peak gain average: > -4 dBi
- Operating temperature: -10 °C - 55 °C
- VSWR: 2,5:1 max.
- Dimension (LxBxH): 21,5x 6x 7 mm
Package content
- WLAN antenna internal
Package
Poly Bag

Specification
- Connector: 1 x SMA plug
- Frequency range: 800 - 960 MHz, 1710 - 2700 MHz
- GSM, UMTS, Bluetooth, WLAN 2.4 GHz, ZigBee, DECT, Z-Wave, LoRa 868 MHz / 915 MHz
- Antenna gain: 6 dBi
- Impedance: 50 Ohm
- Polarisation: vertical
- VSWR: 2.0
- Transmission power: 50 W
- Operating temperature: -30 °C ~ 70 °C
- Colour: black
- Antenna length including magnetic base: ca. 510 mm
- Cable: coaxial
- Cable type: RG-58
- Cable colour: black
- Cable attenuation: 0.6 dB @ 1 GHz per meter
- Cable diameter: ca. 4.95 mm
- Cable length incl. connector: ca. 3 m
- Diameter magnetic base: ca. 80.0 mm
System requirements
- Device with a free SMA jack
Package content
- LTE antenna
Package
- Poly bag

Specification
- Connector: N jack
- Antenna type: Collinear dipole array
- Frequency range: 860 - 870 MHz
- Antenna gain: 8 dBi
- Impedance: 50 Ohm
- Polarisation: vertical
- HBW horizontal beamwidth: 360°
- VBW vertical beamwidth: 60°
- VSWR: 1.5
- Power handling: max. 100 W
- Operating temperature: -40 °C ~ 60 °C
- Body: GFRP UV resistant
- Length: ca. 147.4 cm
- Diameter: ca. 2.6 cm
- Weight:
antenna: ca. 800
mounting material: ca. 70 g
System requirements
Device with a free N connector
Package content
- Antenna
- Mounting material