REICHELT IE: Men s underwear
The Best
DUO T2 32M 3P - DUOSIDA connector, type-2, 32 A, three-phase, male
63.08 EUR
Charging plug, type 2, 32 A, male, 3-phase- Charging plug according to IEC 62196-2
- Manufacturer: DUOSIDA
- required for charging station
- high quality stable design
- with rubber cap (can be dismantled)
- tested by TÜV Rheinland
- contacts: 3 x L + N + PE, as well as PP + CP
- Cable cross-sections: 5 × 6 mm² and 2 × 0.5 mm².
- up to 32 A, 250 V AC permanent
- Contacts for crimping or soldering
- Housing can be opened via 4 Torx screws
- Plug contacts can be removed and contacted individually
- IP44, protection against foreign bodies and splash water
- Scope of delivery: plug without 220 Ohm resistor for current coding
Execution:
L1+L1+L3+N+PE, PP+CP
1-phase: for cables with only one phase or three phases and a diameter of up to 16.5 mm
3-phase: for cables with three phases and a diameter of up to 20 mm
Hint:
As the assembly of charging or adapter cables is very demanding, this should only be carried out by qualified personnel.
Consequential damage due to incorrect handling or installation will not be accepted.
Top Pick
DUOSIDA DUO LD T2 32M 3P - Charging socket, type-2, 32 A, three-phase, male
86.75 EUR
Charging socket, type-2, 32 A, male, three-phase- Charging socket that meets the IEC 62196-2 specification
- Mounts on the side of the vehicle
- Tested by TÜV Rheinland
- High-quality and secure design
- Sealed cover that twists off
- Option to install 3-mm LED for red and green lights
- Contacts: 3x L + N + PE, plus PP + CP
- Cable cross-sections: 5 x 6 mm² and 2 x 0.5 mm²
- Up to 32 A, 240 V AC, phase
- Contact element for crimping or soldering
- With rubber grommet to provide protection from splashes
- Connector contacts can be individually removed and bonded
- IP44 (dust and splash-proof)
- Colour: black
- Electromechanical connector lock sold separately
- Drilling template
Note:
As the make-up of charging and adapter cables is complex, installation should only be performed by a professional.
We do not assume any responsibility for any consequential damage resulting from improper handling or installation.
Excellent
DUO T2 16M 3P - DUOSIDA connector, type-2, 16 A, three-phase, male
63.08 EUR
Charging plug, type 2, 16 A, male, 3-phase- Charging plug according to IEC 62196-2
- Manufacturer: DUOSIDA
- required for charging station
- high quality stable design
- with rubber cap (can be dismantled)
- tested by TÜV Rheinland
- contacts: 3 x L + N + PE, as well as PP + CP
- Cable cross-sections: 5 × 2.5 mm² and 2 × 0.5 mm².
- up to 16 A, 250 V AC permanent
- Contacts for crimping or soldering
- Housing can be opened via 4 Torx screws
- Plug contacts can be removed and contacted individually
- IP44, protection against foreign bodies and splash water
- Scope of delivery: Plug without 680 Ohm resistor for current coding
- Plug colour: single phase = green, 3-phase = white
Execution:
L1+L1+L3+N+PE, PP+CP
1-phase: for cables with only one phase or three phases and a diameter of up to 13.5 mm
3-phase: for cables with three phases and a diameter of up to 15.5 mm
Hint:
As the assembly of charging or adapter cables is very demanding, this should only be carried out by qualified personnel.
Consequential damage due to incorrect handling or installation will not be accepted.