Best Memory card readers Products REICHELT IE

Home > Memory card readers > REICHELT IE > Memory card readers REICHELT IE

REICHELT IE: Memory card readers

The Best

LOGILINK CR0012 - Card Reader, internal, 3,5'', USB 2.0, All-in-1 18.17 EUR This card reader is suitable for the installation into the 3.5'' slot of your PC. The connection is made internally via the USB port of the mainboard or USB controller. It reads and describes 54 of the most common card types and also has a USB front output.

Details:

Compatible with USB 2.0/1.1 specification
Card Reader to be installed in the computer
Standard size for 3.5'' drive bay
Data Internal connection to USB 2.0Suitable for: CF I/II/Ultra CF/MD, SD/SDHC/MMC/RS MMS, MS/MS-Pro/MS-Duo/MS-Pro-Duo, XD, microSD/microSDHC
Power supply via internal connection
No driver installation required

SEE OFFER

Top Pick

DELOCK 91624 - IDE card reader for CF cards 20.8 EUR This internal Card Reader can be installed into a free slot of your PC case or without slot bracket internally as card reader board. It enables you to use a Compact Flash card via an IDE interface. The optional CF card works as additional storage space, as well as HDD for an operating system.

Specification

Connector external: 1x CF slot
Connector internal: 1x IDE 40 pin male, 1x IDE 44 pin male, 1x Molex 4 pin power connector
Bootable
Supports +3.3 V or 5 V Compact Flash cards
Supports Compact Flash type I, type II or Micro Drive
Master or Slave mode selection
OS independent, no driver installation necessary

System requirements

PC with one free slot
A free IDE port
One IDE cable
Power supply with a free Molex power connector

Package content

IDE to Compact Flash Card Reader
User manual

SEE OFFER

Excellent

DELOCK 91007 - Card Reader, external, USB 2.0 20.23 EUR This card reader by Delock has six memory card slots and allows to read and write many different memory cards. The card reader can be connected to a PC or laptop via the USB Type-A interface.

Specification

Connectors: 1 x USB 2.0 Type-A male, 1 x CF slot, 1 x SD / MMC slot, 1 x MS slot, 1 x xD slot, 1 x M2 slot, 1 x Micro SD slot
Data transfer rate up to 480 Mbps
Hot Swap, Plug & Play
Dimensions (LxWxH): ca. 56.6 x 43.5 x 13.2 mm

Supports following memory cards:

Slot 1: CF I, CF II, CF4.0, CF Ultra, CF Ultra DMA, CF Ultra II, CF Ultra III, CF Ultra IV, CF Extreme, CF Extreme III, CF Extreme IV, Microdrive, MagicStor
Slot 2: SD, SD Pro, SD Ultra, SD High Capacity (SDHC), Turbo-SD, SDHC Turbo, SD Ultra, SD Ultra II, SDHC Ultra, SDXC, SDXC Ultra, MMC-I, MMC-II, MMC plus, MMC plus Turbo, MMC 4.0, Mini SD*, Mini SDHC*, Turbo Mini SD*, MMCmobile*, RS-MMC*, RS-MMC 4.0*
Slot 3: xD, xD type M, xD type H
Slot 4: Micro SD, Micro SDHC, Micro SDHC Ultra, T-Flash, MMCmicro
Slot 5: MS Micro, MS-Pro Micro, MS-HG Micro, MS XC-HG Micro, M2
Slot 6: MS, High Speed Memory Stick (HS-MS), MS Pro, MS Pro-HG, MS-Pro Duo, MS-HG, Memory Stick XC, MS Magic Gate, MS-Pro Magic Gate, MS-Duo, MS-Duo Magic Gate, MS Pro-HG Duo, MS-Duo, MS XC-Duo, MS XC-HG Duo

*Adapter is required

System requirements

Android 11.0 or above
Chrome OS
Linux Kernel 5.11 or above
Mac OS 11.2.3 or above
Windows 8.1/8.1-64/10/10-64/11
PC or laptop with a free USB Type-A port

Package content

USB 2.0 Card Reader
USB 2.0 cable
User manual

SEE OFFER

Recommended

KINGSTON MLP - Card Reader, MobileLite Plus USB 3.2 Gen 1 SDHC/SDXC UHS-II. 21.27 EUR Speed and performance of the next level

USB 3.2 Gen 1 speeds
Top performance for UHS-II and support for UHS-I cards
Designed for optimal performance with Kingston SD cards
Portable, stylish and minimalist design

Kingston's MobileLite Plus SD reader offers USB 3.2 Gen 1 speeds, maximum performance for UHS-II supported SD cards, and backward compatibility with UHS-I supported SD cards. Use with Kingston's UHS-II-supported SD cards provides optimal performance and reliability. Increase workflow efficiency with incredible UHS-II speeds for faster file transfers and faster processing times. The card reader features a minimalist and compact design for greater mobility, making it a perfect travel companion, so you have everything you need to carry on working while travelling. The reader is best combined with Kingston Canvas Go! Plus or Canvas React Plus SD cards.

SEE OFFER

Featured

OTHER WORLD COMPUTING OWC TCDSDRDR - Card reader, USB 3.2 Gen 2, USB-C, 2x SD 97.76 EUR

Dual-slot design:
Supports two SDXC UHS-II cards while providing fast transfer.
USB 3.2 Gen 2 (10 Gbps):
High transfer speeds up to 10 Gbps, ideal for large data volumes.
Compatibility:
Fully compatible with UHS-I and UHS-II SDXC cards.
Compact design:
Portable and lightweight, ideal for on the go or in the studio.
Optimised data management:
Two card slots for parallel data transfers, meaning a faster workflow.
Durable design:
Made from high-quality, robust material to ensure long-lasting durability and reliability.

OWC Atlas USB 3.2 (10 Gb/s) Dual SD card reader/writer
The OWC Atlas USB 3.2 Dual SD Card reader/writer is the ideal solution for those who need to work quickly and efficiently with SD cards. This card reader supports SDXC UHS-II cards and features a USB 3.2 Gen 2 interface that enables data transfer rates of up to 10 Gbps to offer outstanding performance for photographers and videographers who need speed and reliability.

SEE OFFER

Alternative

OTHER WORLD COMPUTING OWC TB3CFXRDR - Card reader, USB-C/Thunderbolt 3, CFexpress 2.0 type B 119.46 EUR

Extremely fast data transfers:
With a speed of up to 1600 MB/s, the Atlas FXR enables fast data transfers from CFexpress type B cards
Thunderbolt 3 + USB 3.2 support:
Compatible with Thunderbolt 3 and USB 3.2 (10 Gbps) interfaces for maximum performance
Compact size:
The Atlas FXR is around 7x smaller than conventional Thunderbolt CFexpress card readers, making it ideal for on-the-go use
Bus-powered:
No external power source required. The Atlas FXR is powered directly from the Thunderbolt port
Smooth workflow:
Compatible with a wide range of devices, from Macs to Windows PCs to iPads and Android devices
Durable design:
Robust aluminium enclosure ensures efficient heat dissipation and a longer service life
Daisy chain ready:
Ideal for use in complex setups and editing environments, such as editing 8K videos

SEE OFFER

DELOCK 61795 - Card Reader, internal, Compact Flash, microSD 38.84 EUR A Micro SD memory card can be fitted into the Compact Flash adapter by Delock, which can be used in a Compact Flash slot of a device. The data transfer rate depends on the used memory card.

Specification

Connectors: 1 x CF type I > 1 x Micro SD slot
Push to push Micro SD socket
Supports following memory cards: Micro SD, Micro SDHC, Micro SDXC
Supports memory: SDXC up to 2 TB (exFAT), SD 3.0, Class 2 / 4 / 6 / 10 and UHS-I, Wireless SD and standard SDIO cards
Data transfer rate up to 25 MB/s
Supports IDE UDMA and CF Fast DMA mode

System requirements

A free CF slot

Package content

CF adapter

SEE OFFER

DELOCK 91686 - Delock USB 3.0 > CFast card reader 53.31 EUR Brief description
This Delock card reader enables you to read and write a CFast memory card on your notebook or PC via the USB port.

Technical data
• Aluminium housing
• Connectors: 1 x micro USB 3.0
1 x CFast card slot
• Supports CFast type I/II memory cards
• Data transfer rates of up to 5 Gb/s
• Dimensions (LxWxH): 82 mm x 60 mm x 12 mm
• Hot Swap, Plug & Play

System requirements
• Windows XP/Vista/7
• PC or notebook with one free USB 3.0 port

Package contents
• USB 3.0 to CFast card reader
• USB 3.0 micro to USB 3.0 A cable
• User manual

Packaging
• Box

SEE OFFER

DELOCK 91525 - Card Reader, external, CFast 47.11 EUR The card reader by Delock can be used for reading and writing CFast memory cards. The card reader can be connected to a PC or laptop via the USB Type-A interface.

Specification

Connectors: 1 x USB 3.0 Type-A male > 1 x CFast 2.0 slot
Chipset: Asmedia ASM1153E
Data transfer rate up to: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps
Supports CFast type I / II memory cards
Downwards compatible to CFast 1.0
Housing material: aluminium
Dimensions without cable (LxWxH): ca. 58.1 x 50.7 x 10.3 mm
Cable length without connectors: ca. 8 cm
Colour: anthracite
Plug & Play

System requirements

Linux Kernel 2.6 or above
Mac OS 10.9 or above
Windows 7/7-64/8.1/8.1-64/10/10-64
PC or laptop with a free USB Type-A port

Package content

Card reader USB 3.0 to CFast

SEE OFFER

DELOCK 62900 - External USB 3.0 Hub, USB C > 3x USB A + 2 Slot SD, black 38.57 EUR This USB Hub by Delock can be connected to a computer via the USB Type-C™ interface. It expands the computer by three USB Type-A connectors as well as two slots for SD and Micro SD memory cards. If the hub is connected to a computer with a USB 3.1 interface, a maximum current of 900 mA is divided between the USB ports and the card reader. If necessary, an optional power supply or an optional power cable can be connected to the power socket.

Specification

Connectors: 1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ male > 3 x SuperSpeed USB (USB 3.1 Gen 1) Type-A female, 1 x SD slot, 1 x Micro SD slot, 1 x 5 V DC jack
Chipset: Genesys Logic GL3520 (Hub), GL3224 (Card Reader)
Data transfer rate up to: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps
The Card Reader supports following memory cards: 1. Slot Secure Digital, SD, SD3.0 UHS-I, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC, MMC-I, MMC-II, MMC 4.0, Mini SD, Mini SDHC, MMCmobile, RS-MMC, RS-MMC 4.0
2. Slot micro Secure Digital, MicroSD, Micro SDHC, Micro SDHC Ultra, T-Flash, MMCmicro
USB cable directly on the hub (length ca. 15 cm)
Dimensions (LxWxH): ca. 90 x 40 x 13 mm
1 x ferrite core
Colour: black
Plug & Play

System requirements

Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 2.6.x / Kernel 4.x.x, Mac ex OS 10.11, Android ex 6.0
PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port

Package content

Hub USB + card reader
User manual

Specification of the power jack

5 V, ground outside, plus inside
Dimensions: inside: ø ca. 1.35 mm, outside: ø ca. 3.5 mm, length: ca. 9 mm
Optional power cable: Delock 82377
Optional power supply: Navilock 41337

Package

Retail Box

SEE OFFER

DELOCK 91704 - Delock USB 3.0 all-in-1 card reader 47.11 EUR This Delock card reader enables you to read and write 64 different memory cards on your notebook or PC. The card reader can be connected to a USB 3.0 interface to achieve a faster data transfer rate of up to 5 Gb/s (SuperSpeed). Furthermore, the USB 3.0 A connector is backwards compatible with its predecessors USB 2.0 and USB 1.1, so the card reader can also connect to a USB 2.0 or USB 1.1 port.

Technical data
• USB 3.0 micro port
• Data transfer rates up to:
Super-Speed 5 Gb/s,
High-speed 480 Mb/s,
Full-speed 12 Mb/s,
Low-speed 1.5 Mb/s
• Supports PIO, DMA, UDMA mode
• Supports UDMA 7
• LED display for power and access
• Dimensions (LxWxH): 67 mm x 60 mm x 12 mm
• Hot Swap, Plug & Play

• Supports the following memory cards:
Slot 1

CF I, CF Ultra, CF Ultra II, CF Ultra III, CF Ultra IV, CF Extreme,
CF Extreme III, CF Extreme IV, CF Extreme Pro, CF Elite, CF Elite Pro,
CF Ultimate, CF Pro, CF Pro II, CF Pro III
Slot 2

SD, SD Pro, SD Plus, SD Ultra, SD Gaming, SD Extreme,
SD high-capacity (SDHC), SDHC Ultra, SDHC Extreme, SDXC,
SDXC Ultra, MMC-I, MMC-II, HS-MMC, MMC plus, Mini SD*,
Mini SDHC*, MMCmobile*, MMC Micro*, RS-MMC*, RS-MMC 4.0*,
RS-MMC HS*, DV RS MMC*
Slot 3

MicroSD, Micro SDHC, Micro SDHC Ultra, T-Flash, MMCmicro,
MS Micro (M2)
Slot 4

MS, MS Pro, MS Pro HighSpeed, MS Pro Ultra II, MS Pro Extreme,
MS Pro Extreme III, MS-Duo, MS-Duo HighSpeed, MS-Pro Duo,
MS-Pro Duo HighSpeed, MS-Pro Duo Ultra, MS-Pro Duo Ultra II,
MS Duo-ROM, MS-Pro Duo MARK2, MS Pro-HG Duo HX,
MS Pro-HG Duo, MS Pro-HG Duo Ultra
Slot 5

xD, xD type M, xD type H
*Adapter required

System requirements
• Supported operating systems:
USB 3.0: for Windows XP/XP-64/Vista/Vista-64/7/7-64
USB 2.0: for Windows XP/XP-64/Vista/Vista-64/7/7-64,
Mac OS 10.5, 10.6, Linux from Kernel 2.6
• PC or Notebook with a free USB port

Package contents
• All-in-1 USB 3.0 card reader
• USB 3.0 micro to USB 3.0 A cable
• User manual

SEE OFFER

TRANSCEND TS-0MCF2PC - Card Reader, Adapter, Compact Flash, PCMCIA 25.4 EUR Converts your CompactFlash Card to a standard PCMCIA card format.

Key Features

Converts 50-pin CompactFlash Card to 68-pin PCMCIA
Fully compatible with Type I CompactFlash Cards
Fast read and write to a CompactFlash Card via any PC Card slot

SEE OFFER

TRANSCEND TS-RDF9K2 - Card Reader, external, USB 3.1, SD, microSD, Compact Flash 29.54 EUR USB 3.1 Gen 1 Card Reader
Taking full advantage of the UHS-II technology, the RDF9 UHS-II Card Reader unleashes the high-speed performance of SDXC / SDHC UHS-II memory cards. Equipped with USB 3.1 Gen 1 interface, the RDF9 delivers the blazing fast read and write speeds of up to 260MB/s and 190MB/s accordingly*, facilitating high resolution video and RAW image transfers and post-production processing for professional photographers, videographers and graphic designers. Additionally, it also boasts the CompactFlash, SD and microSD card slots, offering you to transfer different types of digital files with one compact card reader.

Made for the latest UHS-II SD cards
The RDF9 UHS-II Card Reader with the latest UHS-II interface is here to unleash the high speed performance of a UHS-II SD card, transferring high resolution RAW images and HD videos to your computer just in seconds. In addition, it is backward compatible with UHS-I and any other SDXC and SDHC SD cards.

Blazing-fast transfer speeds ever
Taking full advantage of USB 3.1 and UHS-II technology, the read and write speeds of the RDF9 are up to 260MB/s and 190MB/s accordingly. When paired with a 32GB Transcend's UHS-II SD card, the RDF9 only takes 38 seconds to transfer a 8GB of video file.

A must-have for professionals
High speed boosts your workflow and efficiency. The versatile RDF9 lets professional photographers, videographers and graphic designers transfer data at high speed, accelerating the entire post-production processing.

All you can transfer in one card reader
Besides the SD card slot, the multifunctional RDF9 also boasts CompactFlash and microSD card slots, offering you to transfer different types of digital files with one compact card reader.

Free RecoveRx software
Transcend’s RDF9 card reader includes a free download of our exclusive RecoveRx software – a user-friendly application that allows you to conduct an in-depth search within your storage device for traces of erased data that can be recovered.

Specifications

Card Reader Slot(s): SD /microSD/CompactFlash
Memory Card Supported: SDHC (UHS-II)/SDXC (UHS-II)/SDHC (UHS-I)/SDXC (UHS-I)/microSDHC (UHS-I)/microSDXC (UHS-I)/CompactFlash (UDMA6)/CompactFlash (UDMA7)
System Requirement - Operating System: Microsoft Windows 7, Microsoft Windows 8, Microsoft Windows 10, Mac OS X 10.2.8 or later, Linux Kernel 2.6.30 or later

SEE OFFER

DELOCK 65529 - Mobile OTG card reader + 3-port hub 20.23 EUR Read and write memory cards via the micro-B USB OTG port of a tablet or smartphone using this Delock card reader + hub. It also provides three USB-A ports for connecting e.g. HDDs, memory sticks, keyboards, mouses etc. with standard USB connections to mobile phones, smartphones, tablets etc. with OTG support.

Technical data
• Connectors:
1 x Micro USB type B plug (connection to OTG device)
3 x USB type A port for USB sticks, HDDs, mouses, keyboards
1 x SD/SDHC slot
1 x micro SD slot
1 x M2 slot
1 x MS slot
1 x DC power socket
• Blue LED display
• OTG function required
• Only FAT32-format memory can be used
• Only one memory card can be operated
at a time
• Dimensions: (LxWxH): approx. 242 x 66 x 16 mm
• Colour: black

• Supports the following memory cards:
Slot 1 Secure Digital/Multi Media Card
SD, SDHC, SDXC, Extreme SD, MMC, RC-MMC

Slot 2 Micro SD
MicroSD, Micro SDHC, Micro SDXC, T-Flash, MMC-Micro

Slot 3 M2
MS Micro (M2)

Slot 4 MS
MS, MS Duo, MS Pro, MS Pro Duo, MS Pro-HG, MS XC-HG

Power connector specification
• 5 V, earth outside, positive inside
• Dimensions:
Interior: ø approx. 1.3 mm
Exterior: ø approx. 3.5 mm
Length: approx. 9 mm

System requirements
• Mobile device with OTG support and USB Micro-B port

Package contents
• OTG card reader + hub
• USB power cable
• User manual

SEE OFFER

TRANSCEND TS-RDF5W - Multi-card reader USB 3.0, white 18.17 EUR With the RDF5 USB 3.0 card reader you can exhaust the full potential of your high-speed memory cards! The support of all common card formats in combination with the performance increase as a result of using USB 3.0 technology makes Transcend's USB 3.0 card readers the ideal products for fast and efficient data transfer.

• Ideal for transmitting high-resolution images and video recordings
• Practical LED display for checking data transfer activity
• Compact and always at hand, backwards compatible to USB 2.0
• Supported SD cards: SDHC (UHS-I), SDXC (UHS-I), microSD, microSDHC (UHS-I), microSDXC (UHS-I)
• System requirements: Desktop PC or notebook with USB connector (A USB 3.0 connector is required to achieve USB 3.0 performance) - One of the following operating systems: Windows XP/Vista/7/8 (32 bit or 64 bit) Mac OS X 10.2.8, or later Linux Kernel 2.6.30 or later
• Size: 56 x 24 x 8.9 mm
• Weight: 18 g

SEE OFFER

OTHER WORLD COMPUTING OWC TCCFXBSDRDR - Card reader, USB-C, CFexpress 2.0 type B, SD 97.76 EUR

Dual-slot design:
Supports both CFexpress type B and SDXC UHS-II cards
USB 3.2 Gen 2 (10 Gbps):
Enables rapid data transfer at up to 10 Gbps
Compatibility:
Ideal for photographers, videographers and content creators who work with high-quality media
Fast data transfers:
Enhanced for fast processing of 4K/8K video and large RAW images
Compact size:
Portable and lightweight, ideal for on the move
Reliable cooling:
Prevents overheating and ensures stable performance
Robust enclosure:
Made from high-quality materials for long-lasting durability

OWC Atlas USB 3.2 (10 Gb/s) Dual CFexpress + SD card reader
The OWC Atlas USB 3.2 Dual CFexpress + SD card reader is a versatile, powerful solution for professionals who regularly work with high-resolution images and videos. With its two card slots for CFexpress type B and SDXC UHSII cards, users can manage different media types simultaneously, delivering an efficient workflow.

SEE OFFER

SAFESCAN TM RF-150 - RFID-Reader TimeMoto RF-150 113.26 EUR

USB reader for RFID cards
Reads RFID cards and key fobs at 125 kHz
Activate RFID cards directly via your PC
USB connection cable included
Small footprint, fits on any desk
Dimensions: 64 x 115 x 17 mm
Weight: 117 g
Compatible with TimeMoto PC or PC Plus software
Compatible with: Windows 7, Windows 8, Windows 10

Activate new RFID cards wherever you want
TimeMoto's portable USB RFID reader allows you to register a new RFID card directly on your PC instead of using the clock device. Simply open your TimeMoto PC software, register the new card and assign it to the desired employee - all without leaving your desk. In minutes your employee can use their new RFID card on any device within their network for clocking in or out, even at remote locations.

SEE OFFER

SANDBERG 136-28 - External card reader, USB-A, Micro USB, USB-C 21.27 EUR This smart card reader can be connected to a mobile phone, tablet, laptop or PC using a conventional USB-A port, Micro USB port or USB-C port. Reads and writes onto SD and Micro SD cards. Made of aluminium. Practical size and optimal speed.

SEE OFFER

Memory card readers REICHELT IE Best Products

DELOCK 91745 - USB Type-C™ Card Reader for CFast 2.0 memory cards 48.14 EUR The card reader by Delock can be used for reading and writing CFast memory cards. The card reader can be connected to a PC or laptop via the USB Type-C™ interface.

Specification

Connectors:
1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ male >
1 x CFast 2.0 slot
Chipset: Asmedia ASM1153E
Data transfer rate up to:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
Supports CFast type I / II memory cards
Downwards compatible to CFast 1.0
Housing material: aluminium
Dimensions without cable (LxWxH): ca. 58.1 x 50.7 x 10.3 mm
Cable length without connectors: ca. 8 cm
Colour: silver
Plug & Play

System requirements

Linux Kernel 2.6 or above
Mac OS 10.9 or above
Windows 7/7-64/8.1/8.1-64/10/10-64
PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port

Package content

Card reader USB Type-C™ to CFast

Package

Retail Box

SEE OFFER SEE OFFER ebay

DELOCK 91741 - Card Reader, external, USB 3.2 Gen1 Type-C, XQD 36.77 EUR USB Type-C™ Card Reader for XQD 2.0 memory cards

The card reader by Delock can be used for reading and writing XQD memory cards. The card reader can be connected to a PC or laptop via the USB Type-C™ interface.

Specification

Connectors:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ male >
1 x XQD 2.0 slot
Push to push XQD socket
For XQD memory cards based on USB
Data transfer rate up to:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
Housing material: aluminium
Dimensions without cable (LxWxH): ca. 62 x 57 x 15 mm
Cable length without connectors: ca. 13 cm
Colour: grey
Plug & Play

System requirements

Android 10.0 or above
Chrome OS 87.0 or above
iPad Air (4th Generation) or above
iPad Pro (3rd Generation) or above
Linux Kernel 5.4 or above
Mac OS 10.15.7 or above
Windows 8.1/8.1-64/10/10-64
PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port

Package content

Card reader USB Type-C™ to XQD

Package

Retail Box

SEE OFFER SEE OFFER ebay

DELOCK 91757 - Card Reader, external, USB-A 3.2 Gen 1, 3-in-1 25.4 EUR This card reader by Delock has three memory card slots and allows to read and write many different memory cards. The card reader can be connected to a PC or laptop via the USB Type-A interface.

Specification

Connectors:
1 x SuperSpeed USB (USB 3.2 Gen 1) Type-A male >
1 x SD / MMC slot
1 x MS slot
1 x Micro SD / M2 slot
Data transfer rate up to:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
Display two drive letters at the same time (SD and micro SD / M2 slots must be used separately)
1 x LED indicator
Dimensions (LxWxH): ca. 69 x 19 x 11 mm
Hot Swap, Plug & Play

Supports following memory cards:
Slot 1
SD, SD3.0 UHS-I, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC,
MMC-I, MMC-II, MMC 4.0, Mini SD, Mini SDHC, MMCmobile, RS-MMC,
RS-MMC 4.0

Slot 2
MS, High Speed Memory Stick (HS-MS), MS Pro, MS Pro-HG, MS-Pro Duo,
MS-HG, Memory Stick XC, MS Magic Gate, MS-Pro Magic Gate, MS-Duo,
MS-Duo Magic Gate, MS Pro-HG Duo, MS-Duo, MS XC-Duo, MS XC-HG Duo

Slot 3
Micro SD, Micro SD3.0 UHS-I, Micro SD4.0 UHS-II, Micro SDHC,
Micro SDXC, T-Flash, MMCmicro, MS Micro, MS-Pro Micro, MS-HG Micro,
MS XC-HG Micro, M2

System requirements

Chrome OS
Linux Kernel 5.8 or above
Mac OS 11.2.3 or above
Windows 8.1/8.1-64/10/10-64
PC or laptop with a free USB Type-A port

Package content

USB Card Reader
User manual

Package

Retail Box

SEE OFFER SEE OFFER ebay

KINGSTON MLPM - Card reader, external, MobileLite Plus, USB 3.2 Gen1 21.27 EUR UHS-II microSD card reader with UHS-I backwards compatibility
Kingston's MobileLite Plus microSD reader offers USB 3.2 Gen 1 speeds, maximum performance for UHS-II supported microSD cards, and backwards compatibility with UHS-I supported microSD cards. Use with Kingston's UHS-II-supported microSD cards provides optimal performance and reliability. Increase workflow efficiency with incredible UHS-II speeds for faster file transfers and faster processing times. The card reader features a minimalist and compact design for greater mobility, making it a perfect travel companion, so you have everything you need to carry on working while travelling. The reader is best combined with Kingston Canvas Go! Plus or Canvas React Plus microSD cards.

USB 3.2 Gen 1 speeds
Top performance for UHS-II and support for UHS-I cards
Designed for optimal performance with Kingston microSD cards
Portable, stylish and minimalist design

SEE OFFER SEE OFFER ebay

NEDIS N CRDRU3100BK - Card Reader, Multicard, USB 3.0, 5 Gbps 20.23 EUR The Nedis® USB 3.0 Multi-card Memory Card Reader lets you backup all your precious photos, music, video and any other data from all your devices.

Compatible with seven types of memory card (SDHC, SDXC, MicroSDHC, MicroSDXC, SD and MicroSD), the USB 3.0 interface offers you a speedy data transfer rate of 5 Gbps for cards up to 1 TB.

Details

Supports all common memory cards

Scope of delivery

Multicard reader

SEE OFFER SEE OFFER ebay

DELOCK 91655 - Compact Flash to IDE 44-pin plug card reader 18.17 EUR This Delock card reader enables Compact Flash cards to be used via 44-pin IDE interfaces. This card reader is bootable, enabling it to also be used as a hard drive and a suitable operating system to be installed on the CF card. The card reader is inserted directly and vertically into a free IDE socket on your motherboard and requires no additional connection cable.

Technical data
• 44-pin IDE to CF card
• 44-pin 2.0 mm standard IDE plug
• For Compact Flash type I, type II and Microdrive
• Select master or slave mode
• 2 x mounting holes
• Powered by IDE
• Supports DMA and Ultra DMA mode. Requires a compatible Flash Media card
to use this mode.
• Size: 52 mm x 45 mm (including pin length)

System requirements
• One free 44-pin IDE slot
• For DOS, Windows 3.1/NT4/98SE/ME/2000/XP/Vista, Unix, Linux

Package contents
• IDE to CF card reader

SEE OFFER SEE OFFER ebay

DELOCK 91732 - OTG 5-slot card reader for smartphones 23.34 EUR Read and write memory cards via the micro USB OTG port of a tablet or smartphone using this Delock card reader.

Technical data
• Connections:
1 x micro USB type B plug >
1 x SD/SDHC/MS/MMC slot
1 x micro SD slot
1 x xD slot
1 x MS slot
1 x CF slot
• Chipset: IT1338E
• Blue LED display when reading and writing
• OTG function required
• Only FAT32-format memory can be used
• Only one storage medium can be used
at a time
• Dimensions: (L x W x H): approx. 101.5 x 27 x 15 mm
• Cable length: approx. 155 mm (incl. micro USB connector)
• Colour: black

• Supports the following memory cards:
Slot 1 Secure Digital/multimedia card
SD, SDHC, SDXC, Extreme SD, Extreme II SD, Extreme III SD, Ultra SD, Ultra II SD, Ultra II SD P Plus, SD- Ultra-X, Ultra Speed SD, SD Pro,
SD Elite Pro, HS SD, MMC, MMC 4.0

Slot 2 Micro SD
MicroSD, Micro SDHC, Micro SDXC

Slot 3 xD
xD, xD 1.21

Slot 4 MS
MS, MS Pro Duo, MS MG Pro, MS MG Pro Duo,
HS MS MG Pro Duo, HS MS Pro Duo

Slot 5 CF
CF I, CF II, CF 3.0, CF4.0, Extreme III CF, Extreme CF, Ultra II CF,
HS CF, XS-XS CF, CF Elite Pro, CF Pro, CF Pro II

System requirements
• Mobile device with OTG support and USB Micro-B port

Package contents
• OTG card reader
• User manual

SEE OFFER SEE OFFER ebay

DELOCK 91731 - OTG SD + microSD card reader 16.1 EUR Read and write memory cards via the micro USB OTG port of a tablet or smartphone using this Delock card reader. The card reader can also be conveniently used on PC via the USB A plug.

Technical data
• Connections:
1 x micro USB type B plug (for tablets or smartphones)
1 x USB type A plug (for computer)
1 x SD/SDHC/MS/MMC slot
1 x micro SD slot
• Chipset: MA8170
• Blue LED display when reading and writing
• OTG function required
• Only data carriers in FAT32 format can
be used on smartphones and tablets
• Only one storage medium can be used
at a time
• Dimensions: (L x W x H): approx. 55.2 x 28.7 x 9.2 mm
• Colour: black

• Supports the following memory cards:
Slot 1 Secure Digital/multimedia card
SD, SDHC, SDXC, Extreme SD, Extreme II SD, Extreme III SD, Ultra SD, Ultra II SD, Ultra II SD P Plus, SD- Ultra-X, Ultra Speed SD, SD Pro, SD Elite Pro, HS SD, MMC, MMC 4.0

Slot 2 Micro SD
MicroSD, Micro SDHC, Micro SDXC

System requirements
• Mobile device with OTG support and USB Micro-B port or
• PC or Notebook with a free USB port

Package contents
• OTG card reader
• User manual

SEE OFFER SEE OFFER ebay

DELOCK 91746 - Card Reader, external, XQD, Type-C 48.14 EUR The card reader by Delock can be used for reading and writing XQD memory cards. The card reader can be connected to a PC or laptop via the USB Type-C™ interface.

Specification

Connectors: 1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ male > 1 x XQD 2.0 slot
Push to push XQD socket
For XQD memory cards based on USB
Data transfer rate up to: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps
Housing material: aluminium
Dimensions without cable (LxWxH): ca. 58.1 x 50.7 x 10.3 mm
Cable length without connectors: ca. 8 cm
Colour: anthracite
Plug & Play

System requirements

Linux Kernel 2.6 or above
Mac OS 10.9 or above
Windows 7/7-64/8.1/8.1-64/10/10-64
PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port

Package content

Card reader USB Type-C™ to XQD

SEE OFFER SEE OFFER ebay

DELOCK 91602 - Card Reader, external, USB 2.0, microSD, SD 17.13 EUR This card reader by Delock has two memory card slots and allows to read and write different SD, MMC and Micro SD memory cards. The card reader can be connected to a PC or laptop via the USB Type-A interface.

Specification

Connectors: 1 x USB 2.0 Type-A male > 1 x SD / MMC slot, 1 x Micro SD slot
Chipset: Moai M8168
Data transfer rate up to 480 Mbps
1 x LED indicator
Hot Swap, Plug & Play
Dimensions (LxWxH): ca. 60 x 22 x 11 mm

Supports following memory cards:

Slot 1: SD, SD3.0 UHS-I, SD4.0 UHS-II, SD High Capacity (SDHC), SD High Speed, SDXC, Turbo-SD, Turbo Mini SD*, Mini SD*, MMC-I, MMC-II, MMC plus, MMC Dual Voltage, RS-MMC*, RS-MMC Dual Voltage*, RS-MMC4.0*
Slot 2: Micro SD, Micro SD3.0 UHS-I, Micro SD4.0 UHS-II, Micro SDHC, Micro SDXC, T-Flash, MMC Mobile, MMC micro
*Adapter is required

System requirements

Android 10.0 or above
Chrome OS 86.0 or above
Linux Kernel 3.2 or above
Mac OS 10.15.7 or above
Windows 8.1/8.1-64/10/10-64
PC or laptop with a free USB Type-A port

Package content

USB 2.0 Card Reader

Package

Retail Box

SEE OFFER SEE OFFER ebay

KINGSTON WFS-SDC - Card Reader, microSD, for Workflow Station 35.74 EUR Workflow microSD Reader
Record. Connect. Create.

Stream videos, photos, and audio from multiple sources at once
Use the card readers with the dock or on the go*
Flexible system for a smooth workflow in the future
Incredible USB 3.2 speeds

Kingston's Workflow Station and readers provide a flexible system for transferring videos, photos and audio from multiple sources at the same time.* speed up your post-processing workflow and create a setup to suit your needs, allowing you to use the files individually. The [Workflow Station] Dock is customizable so you can only use the USB miniHub, SD or microSD readers that are required for your recording. Whether you're recording a 4K/8K multicam recording with portable audio recorders for each host or a B-roll with drones and GoPros movies, you can connect up to four readers to the dock at the same time and quickly transfer footage. The [Workflow Station] and readers support USB 3.2 speeds, so you can begin post-processing faster than ever before. The card readers can also be used on the go for additional flexibility. If you need to rotate on site, simply throw the hub or readers you need into your pocket and connect them to your laptop using the included USB-C® cable.

* compatible with Kingston Workflow products only. Workflow Station includes Dock and USB miniHub. SD/microSD readers are sold separately.
* USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

Note: The delivery takes place without Workflow Station (see Accessories)

SEE OFFER SEE OFFER ebay

DELOCK 64117 - USB Type-C™ Card Reader for SD / MMC + Micro SD memory cards 24.37 EUR This card reader by Delock has two memory card slots and allows to read and write different SD, MMC and Micro SD memory cards. The card reader can be connected to a PC or a mobile device via the USB Type-C™ interface.

Small sturdy helper
Due to its small dimensions and its stable metal housing, this Delock card reader is especially suitable for travelling. Thanks to its small size, the USB card reader fits in every trouser pocket or can be packed together with the laptop or tablet in the bag and used as needed.

Specification

Connectors: 1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ male, 1 x SD slot, 1 x microSD slot
Chipset: Genesys Logic GL3224
Data transfer rate up to: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps
USB bus powered

Supports following memory cards:

Slot 1: SD, SD3.0 UHS-I, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC, MMC-I, MMC-II, MMC 4.0, Mini SD, Mini SDHC, MMCmobile, RS-MMC, RS-MMC 4.0
Slot 2: microSD, microSDHC, microSDHC Ultra, T-Flash, MMCmicro

System requirements

Android 10.0 or above
Chrome OS 83.0 or above
iPad Pro (3rd Generation) or above
Linux Kernel 5.4 or above
Mac OS 10.15.6 or above
Windows 8.1/8.1-64/10/10-64
PC or mobile devices with a free USB Type-C™ or Thunderbolt™ 3 port

SEE OFFER SEE OFFER ebay

TRANSCEND TS-RDF5K - Multi-card reader USB 3.0, black 20.23 EUR With the RDF5 USB 3.0 card reader you can exhaust the full potential of your high-speed memory cards! The support of all common card formats in combination with the performance increase as a result of using USB 3.0 technology makes Transcend's USB 3.0 card readers the ideal products for fast and efficient data transfer.

• Ideal for transmitting high-resolution images and video recordings
• Practical LED display for checking data transfer activity
• Compact and always at hand, backwards compatible to USB 2.0
• Supported SD cards: SDHC (UHS-I), SDXC (UHS-I), microSD, microSDHC (UHS-I), microSDXC (UHS-I)
• System requirements: Desktop PC or notebook with USB connector (A USB 3.0 connector is required to achieve USB 3.0 performance) - One of the following operating systems: Windows XP/Vista/7/8 (32 bit or 64 bit) Mac OS X 10.2.8, or later Linux Kernel 2.6.30 or later
• Size: 56 x 24 x 8.9 mm
• Weight: 18 g

SEE OFFER SEE OFFER ebay

DELOCK 62637 - CF-Adapter for iSDIO (WiFi SD), SDHC, SDXC 46.08 EUR Compact Flash Adapter for iSDIO (WiFi SD), SDHC, SDXC Memory Cards

This Compact Flash Adapter by Delock enables you to use normal SD memory cards as well as WiFi SD memory cards for your camera with Compact Flash slot. Just insert the SD card into the adapter and then into your camera. The data transfer rate depends on the memory card you use.

Specification
• CF type I
• Supports following memory cards, WiFi or normal:
SD, SDHC, SDXC, mini SD*, mini SDHC*, micro SDHC*, micro SDXC*, T-Flash*
* with Adapter (Adapter not included in the package content)
• Supports memory:
up to 2 TB
SD 3.0
Class 2/ 4/ 6/ 10 and UHS-I
file system FAT / FAT32 / exFAT / NTFS
Wireless SD (iSDIO) and standard SDIO cards
• Data transfer rate up to 25 MB/s
• Dimensions (LxWxH): ca. 42.8 x 36.4 x 3.3 mm
• Supports IDE UDMA, DMA and PIO mode
• Special plastic housing for ideal WiFi reception

Package content
• CF adapter

SEE OFFER SEE OFFER ebay

DELOCK 91583 - Card Reader, external, XQD 40.91 EUR The card reader by Delock can be used for reading and writing XQD memory cards. The card reader can be connected to a PC or laptop via the USB Type-A interface.

Specification

Connectors: 1 x USB 3.0 Type-A male > 1 x XQD 2.0 slot
Push to push XQD socket
For XQD memory cards based on USB
Data transfer rate up to: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps
Housing material: aluminium
Dimensions without cable (LxWxH): ca. 58.1 x 50.7 x 10.3 mm
Cable length without connectors: ca. 8 cm
Colour: anthracite
Plug & Play

System requirements

Linux Kernel 2.6 or above
Mac OS 10.9 or above
Windows 7/7-64/8.1/8.1-64/10/10-64
PC or laptop with a free USB Type-A port

Package content

Card reader USB 3.0 to XQD

SEE OFFER SEE OFFER ebay

DELOCK 61796 - Compact Flash Adapter for SD and MMC 40.91 EUR With this Compact Flash adapter from Delock you can use SD or MMC memory cards for your camera with Compact Flash slot. Simply insert the SD or MMC card into the CF adapter and then this into your camera. The data transfer rate depends on the memory card.

Technical Data
• CF Type II
• Supports following memory cards:
SD, SDHC, mini SD *, Micro SD *, micro SDHC, *
T-Flash *, SDXC, MMC, MMC 4.0, RS-MMC *, RS-MMC 4.0 *
* With adapter (not included)
• Supports up to 2TB of storage in SDXC (exFAT)
• Size (LxWxH): 42.8 mm x 36.4 mm x 5.0 mm
• Supports UDMA IDE and CF Fast DMA mode

Package Contents
• CF adapter

packaging
• Blister

(Supplied without memory card.)
SEE OFFER SEE OFFER ebay

LOGILINK CR0039 - Card Reader, external, USB 2.0, Type-C, micro SD 14.03 EUR The multifunctional memory card reader is designed with Type-C connector, giving your USB-C device extra storage space and easier to share/exchange files. Particularly practical as a key ring, so you always have it with you.

Details:
USB-C mini card reader, key chain
Reversible Type-C connector plugs, never worry plug-in the wrong side
On-The-Go (OTG) function allows you to connect to your mobile/tablet devices with USB-C that supports USB OTG protocol
Compliant with USB 2.0/1.1 specification
Supports microSD, microSDHC/SDXC
Maximum speed: Up to 480 Mbps
Maximum capacity for microSD: 2 TB
Supports MacBook, OTG Android and Windows devices
Plug and play without installing any software
Blue LED activity indication

SEE OFFER SEE OFFER ebay

LOGILINK CR0034A - Card Reader, external, USB 3.0, micro SD,SD 17.13 EUR Compact USB 3.0 card reader for reading and writing SD/SDHC, microSD/SDHC, as well SDXC cards and microSDXC. It is connected to the USB 3.0 port and is backwards compatible with USB 2.0 and USB 1.1.

Details:
USB 3.0 Mini Card Reader
Space-saving version to take suitable
Card Read/Write device for SD/SDHC/SDXC, Micro-SD/Micro-SDHC/Micro-SDXC
Max. data transfer rate: 5 Gbit/s
Protection against dust and dirt

SEE OFFER SEE OFFER ebay

ICYBOX ICY IB-CR201-C3 - Card reader, external, USB A, USB Type-C, USB micro-B 25.44 EUR Features
External card reader with USB Type-C® and dual Type-A/micro-B plug
Supports OTG function with USB micro-B Android mobile devices
Supports microSD and standard SD cards: SD/SDHC/SDXC with up to 128 GB
Compliant with USB 3.0 with up to 5 Gbit/s
Single-LUN (This unit does not support reading two cards at the same time!)

Small Jack of all trades
Mobile devices such as smartphones, cameras, tablets, etc. often save audio, image and video recordings on memory cards. So it helps to have a small and portable gadget at hand that allows to process files on the go. The ICY BOX IB-CR201-C3 card reader for the two most common card formats SD and microSD has the size of a USB stick and the most common USB ports on board.
The multiport
An additional USB Micro-B connector is integrated into the well-known USB Type-A plug, which is revealed when the front, upper Type-A connector is folded up.

Small but powerful
The IB-CR201-C3 is the optimal companion for on the go. Transferring your data from SD or microSD to any mobile device is easy with the IB-CR201-C3 even on holiday.

Future-proof
The twist-proof USB Type-C® connection is also included, so connection to Thunderbolt™ 3 ports is also possible.
SEE OFFER SEE OFFER ebay

DELOCK 91730 - Micro USB OTG card reader + 1 x USB port 14.03 EUR Read and write memory cards via the micro USB OTG port of a tablet or smartphone using this Delock card reader. It also provides one USB A port for connecting HDDs, memory sticks etc. with standard USB connections to mobile phones, smartphones, tablets etc. with OTG support.

Technical data
• Connections:
1 x micro USB type B plug >
1 x USB A port for USB sticks, mouses, keyboards
1 x SD/SDHC/MS/MMC slot
1 x micro SD slot
• Chipset: MA8170
• Blue LED display when reading and writing
• OTG function required
• Only FAT32-format memory can be used
• Only one storage medium can be used at a time
• Dimensions: (L x W x H): approx. 51.5 x 30.5 x 9.4 mm
• Colour: black

• Supports the following memory cards:
• Slot 1 Secure Digital/multimedia card
SD, SDHC, SDXC, Extreme SD, Extreme II SD, Extreme III SD, Ultra SD, Ultra II SD, Ultra II SD P Plus, SD- Ultra-X, Ultra Speed SD, SD Pro, SD Elite Pro, HS SD, MMC, MMC 4.0

• Slot 2 Micro SD
MicroSD, Micro SDHC, Micro SDXC

System requirements
• Mobile device with OTG support and USB Micro-B port

Package contents
• OTG card reader
• User manual
SEE OFFER SEE OFFER ebay

TRANSCEND TS-RDC8K - Card Reader, External, USB 3.1, Type-C, SD, MicroSD, Compact Fla 27.47 EUR Transcend's RDC8 card reader can be used on new computers with USB type C interface, e.g. the Apple 12-inch MacBook or the Google Chromebook Pixel 2. Thanks to its four card slots (SD, microSD, CompactFlash), the RDC8 card reader can work with a variety of memory cards. Due to the USB 3.1 Gen 1 interface, the RDC8 is suitable for fast data transfer from the flash card to the computer with type C USB port.

Twist-proof USB Type C connector
Transcend's RDC8 card reader is particularly easy to connect to the host device thanks to the twist-proof USB type C connector and is compatible with current notebooks with USB type C interface, such as the Apple 12-inch MacBook or the Google Chromebook Pixel 2.

Superior Transfer Speeds
Thanks to its USB 3.1 Gen 1 interface, Transcends RDC8 card reader gets the most out of your high-speed memory card. In addition, the card reader has an LED indicator that indicates whether the card is inserted and whether data is being transferred.

Compact Multi-Function Card Reader
Transcend's RDC8 card reader is equipped with four card slots for SD, microSD and CompactFlash memory cards and thus allows different formats of storage media and data to be transferred with only one card reader.
*Note: The card reader does not support the simultaneous insertion of SD and microSD cards.

Free RecoveRx software
The RDC8 card reader supports the exclusive RecoveRx software, which can be downloaded free of charge from the Transcend website. The easy-to-use application allows you to thoroughly scan the storage medium for any remaining deleted files that can be recovered. USB sticks, memory cards, MP3 players, external hard drives and SSDs are supported.
SEE OFFER SEE OFFER ebay

LOGILINK CR0042 - Card Reader, external, USB 3.0, All-in-1 32.64 EUR This USB 3.0 hub from LogiLink combines a hub with a card reader: You can access 3 USB ports as well as read a wide variety of memory cards, whether CF, M2, MS, microSD or SD. Its space-saving design fits on every desk and even allows you to bring it along, wherever you are.

Details:
USB 3.0 Hub
3x USB ports
Compliant to USB 3.0 / USB 2.0 / USB 1.1 specification
Max. data transfer rate: Up to 5 Gbps
With Card Reader function for SD cards (up to 2 TB), as well as microSD, M2, MS (Duo/Pro) and CF cards
Multi-LUN R/W card reader
Compatible with Mac OS/Windows/Chrome OS/Linux
Power supply through USB connection
Cable length: 1m

SEE OFFER SEE OFFER ebay