Medical equipment supply
The Best
- ANSMANN zinc-air high-performance batteries are the optimal energy source for all standard hearing aids
- mercury-free, therefore they are especially ecologically friendly
- the cells are offered in a practical blister and marked with the commonly used colors
- shelf life: 4 years
- long duration, high voltage stability
- capacity: 100 mAh
- voltage: 1.45 V
- LGA tested quality - the independent testing institute LGA confirmed the complete and permanent quality of the product
Top Pick
Excellent
Recommended
Featured
Reliable and durable power for hearing aids. Individually packed and sealed in the practical Turn & Lock Pack. Turn the battery wheel, remove the batteries and close the tab on the back again. Large sealing tabs with colour and number coding. No discharge by touch thanks to sealing.
Compatible with:
VARTA V 10 / PR 70 / ZA 10 / DA 10 / 10 A (AE) (HPX) / PR 230 H
Alternative
RENATA hearing aid batteries
- Mercury-free
- Optimised for hearing aids with wireless communication
- High longevity
- Blister back contains safety pictograms compliant with the IEC 60086 standard.
- Perforated blister allows you to minimise the card
Technical data
Battery type: hearing aid battery
Battery Type: hearing aid - 312
Industry: watchmaking and jewellery
Chemical system: zinc-air
Weight (g): 0.5
Capacity (mAh): 165
Brand: Renata
Dimension 3 - height (mm): 3.6
Dimension 4 - height (mm): 7.9
Mercury-free: yes
Voltage (V): 1.45
Packaging unit: blister pack of 6"
Lasts longer. Full stop.
The Intenso Energy Ultra type 312 hearing aid battery boasts up to three years of performance and reliability. Replacing the battery is easy, so you can concentrate on the here and now. Proven Intenso quality means you can experience every moment.
Activating the battery: Remove the protective tape film to activate the battery and wait one minute to get the full power of the battery. The zinc reacting with the oxygen in the air activates the battery.
Technical data
Battery type: Zinc-air hearing aid battery
Battery size: PR41/312
Chemical composition: Zinc-air (Zn/O2)
Nominal voltage: 1.45 V
Nominal capacity: Up to 74 hours (148 mAh)
Reference standard: 2006/66/EC, IEC60086-1:2015, IEC60086-2:2015
Shelf life of 3 years
RENATA hearing aid batteries
- Mercury-free
- Optimised for hearing aids with wireless communication
- High longevity
- Blister back contains safety pictograms compliant with the IEC 60086 standard.
- Perforated blister allows you to minimise the card
Technical data
Battery type: hearing aid battery
Battery type: hearing aid - 10
Industry: watchmaking and jewellery
Chemical system: zinc-air
Weight (g): 0.3
Capacity (mAh): 105
Brand: Renata
Dimension 3 - height (mm): 3.6
Dimension 4 - height (mm): 5.8
Mercury-free: yes
Voltage (V): 1.45
Packaging unit: blister pack of 6"
You're full of life. Maximum battery life with Intenso quality.
The Intenso Energy Ultra hearing aid battery in size 10 boasts outstanding performance and battery life. With a shelf life of three years, there's no need to worry about your hearing aid suddenly running out of battery. Replacing the battery is effortless, so you can focus on what really matters and enjoy life in full sound.
Activating the battery: Remove the protective tape film to activate the battery and wait one minute to get the full power of the battery. The zinc reacting with the oxygen in the air activates the battery.
Technical data:
Battery type: Zinc-air hearing aid battery
Battery size: PR70/10
Chemical composition: Zinc-air (Zn/O2)
Nominal voltage: 1.45 V
Nominal capacity: Up to 86 hours (86 mAh)
Reference standard: 2006/66/EC, IEC60086-1:2015, IEC60086-2:2015
Shelf life of 3 years
RENATA hearing aid batteries
- Mercury-free
- Optimised for hearing aids with wireless communication
- High longevity
- Blister back contains safety pictograms compliant with the IEC 60086 standard.
- Perforated blister allows you to minimise the card
Technical data
Battery type: hearing aid battery
Battery type: hearing aid - 13
Industry: watchmaking and jewellery
Chemical system: zinc-air
Weight (g): 0.8
Capacity (mAh): 305
Brand: Renata
Dimension 3 - height (mm): 5.4
Dimension 4 - height (mm): 7.9
Mercury-free: yes
Voltage (V): 1.45
Packaging unit: blister pack of 6"
Experience every moment. Longevity sounds good.
With an impressive shelf life of up to three years, the Intenso Energy Ultra size 13 hearing aid battery boasts a long battery life. It is easy to replace, making hearing aid maintenance quicker and easier. Thanks to the proven Intenso quality, you can be sure that your hearing aid will always work reliably.
Activating the battery: Remove the protective tape film to activate the battery and wait one minute to get the full power of the battery. The zinc reacting with the oxygen in the air activates the battery.
Technical data
Battery type: Zinc-air hearing aid battery
Battery size: PR48/13
Chemical composition: Zinc-air (Zn/O2)
Nominal voltage: 1.45 V
Nominal capacity: Up to 78 hours (230 mAh)
Reference standard: 2006/66/EC, IEC60086-1:2015, IEC60086-2:2015
Shelf life of 3 years
Unbelievably long-lasting. Unashamedly reliable.
Shelf life of up to three years. Nominal capacity of up to 108 hours. The Intenso Energy Ultra type 675 hearing aid battery is one of the longest-lasting button cells for hearing aids on the market. Easy to replace and makes your everyday life easier. Listen to whatever you want. With proven Intenso quality.
Activating the battery: Remove the protective tape film to activate the battery and wait one minute to get the full power of the battery. The zinc reacting with the oxygen in the air activates the battery.
Technical data
Battery type: Zinc-air hearing aid battery
Battery size: PR44/675
Chemical composition: Zinc-air (Zn/O2)
Nominal voltage: 1.45 V
Nominal capacity: Up to 108 hours (540 mAh)
Reference standard: 2006/66/EC, IEC60086-1:2015, IEC60086-2:2015
Shelf life of 3 years
RENATA hearing aid batteries
- Mercury-free
- Optimised for hearing aids with wireless communication
- High longevity
- Blister back contains safety pictograms compliant with the IEC 60086 standard.
- Perforated blister allows you to minimise the card
Technical data
Battery type: hearing aid battery
Battery type: hearing aid - 675
Industry: watchmaking and jewellery
Chemical system: zinc-air
Weight (g): 1.8
Capacity (mAh): 660
Brand: Renata
Dimension 3 - height (mm): 5.4
Dimension 4 - height (mm): 11.6
Mercury-free: yes
Voltage (V): 1.45
Packaging unit: blister pack of 6"
- Very reliable
- Compact in size
- High load peaks
The planetary gear motors, in combination with various gear ratios with 1-, 2- and 3-stage planetary gears in metal design, are designed for high demands with a long service life.
With this product line, DOGA offers a wide range of automation products. The motors with mounted planetary gear have a high degree of reliability in a compact size. Thanks to the high-quality gear combinations, even high peak loads can be handled with ease in a variety of applications.
ANSMANN zinc-air high-performance batteries are the optimal energy source for all common hearing aids.
- Mercury-free, therefore particularly environmentally friendly
- In a practical removal blister
- Labelled with the usual market colour code
- Storage life: 4 years
- Long run times, high voltage stability
- Capacity: 180 mAh
- Voltage: 1.45 V
- LGA tested quality - The independent testing institute LGA has confirmed the comprehensive and durable quality of the product
Strengths
- Penetrating glass measuring tip with fibre diaphragm
- Waterproof, lightweight and pocket-sized
- Calibration in 30 s, very simple and intuitive
- Very fast response time
Description
The CA 10002 pH tester is suitable for many food applications:
Fermentation testing of dairy products
Testing of cheese, up to the degree of ripeness
Testing milk quality
The device is also suitable for testing soil pH testing in agriculture. Its accuracy and fast response time make it particularly recommended for preliminary tests in research and development.
Measuring range:
pH value 2.00 to 12.00 pH
Temperature from 0.0 to 80.0°C/from 32.0 to 176.0°F"
Experience precision measurement accuracy and mobility like never before with our new DSO-200 handheld oscilloscope. Developed for amateur electronics enthusiasts who value precision and portability, the DSO-200 puts peak performance in your hands. The DSO-200 fits comfortably in your hand and is easy to store in your workshop or on your desk thanks to its folding stand and compact, robust design. The user friendliness and portability make the DSO-200 your perfect companion.
Specifications
- Stand function: integrated stand that can be folded down 90°
- Battery: 1000 mAh lithium battery, rechargeable via USB-C (5 V/1 A)
- Display: 2.8"" 320 x 240 LCD display
- Documentation: enclosed instructions in German, English, Spanish, Italian & French
- Sampling rate: 2.5 MS/s
- Bandwidth: 200 kHz
- Vertical sensitivity: 10 mV/Div - 20 V/Div
- Horizontal time range: 10 µs/Div - 50 s/Div
- Test voltage range: X1: 80 Vpp (-40 V - 40 V) X10: 800 Vpp (-400 V - 400 V)
- Trigger modes: auto, normal, single
- Coupling: AC, DC
- Calibration (square wave): frequency: 1 kHz, duty cycle: 50%
- Dimensions: 99 x 69 x 20 mm
Included in delivery
- DSO-200
- USB-C cable
- Wrist strap
- Oscilloscope probe
- Test terminals
- BNC adapter
- Manual
• The micro-tip is for drawing thin lines.
• Accurate and controlled tracks
• Draws conductive silver traces on most surfaces quickly
• The tip of the pencil ensures simple application
• Can be soldered at low temperatures
• Dries within minutes at room temperature
• Contents: 8.5 g
With its compact design, it can be easily placed in any room and provides accurate readings.
The temperature display helps you to create a comfortable indoor climate, while the humidity display helps to monitor the air humidity and prevent problems such as mold or dryness.
With a thermo-hygrometer, you can keep an eye on your indoor climate and make adjustments if necessary to ensure optimum comfort and well-being. Also perfect when traveling.
- Thermo-hygrometer in a set of 3
- Maintain healthy indoor air quality
- Perfect at home or on the go in hotel rooms, vacation homes etc.
- Comfort zone display with various smiley symbols (4-stage)
- Temperature measuring range: 0 °C (0 °F)-65 °C (122 °F), tolerance: ±1 °C
- Humidity measuring range (rH): 10-90 %, tolerance: ±3 % (no condensation)
- Operating temperature: 0-50 °C
- Mounting: With hinged table stand or with double-sided adhesive tape on the wall (adhesive tape not included) included
- Battery operation: 1x 1.5 V LR1130 button cell
- Color: White
Two-pole, digital True RMS voltage tester: Suitable for electrical engineering, industry, maintenance, service (troubleshooting), photovoltaic/wind turbines and hybrid vehicle technology. The practical HardCase with carrying handle and zip, padded inner mesh pocket with zip and flexible fastening loops with Velcro fastener offers ideal protection for your DUSPOL.
Technical features:
- Backlight LC display
- Voltage display LED/LCD
- Voltage measuring range 1 V - 1000 V AC/ 1200 V DC
- Voltage display from 50 V even with flat batteries
- True RMS measurement method
- Turning field direction indication with green LED
- Continuity test optical/acoustic by yellow LED/ buzzer
- Continuity test range 0 kOhm - 100 kOhm
- Resistance measuring range 0.1 kOhm - 300 kOhm LCD
- Resistance measurement 100 Ohm
- Frequency measurement 1 Hz - 1000 Hz LCD
- Diode test
- Polarity display
- Single-pole phase display
- Non-contact voltage detection
- Direct indication without push-button actuation, high-impedance testing
- Load switching via pushbutton, low-resistance testing
- Aware tripping of the RCD/FI circuit breaker
- Vibration alarm in the test handle
- Measuring point illumination
- Internal base load can be switched
- Ingress protection IP65 (dust-tight, jet-proof)
- Tested and approved according to DIN EN 61243-3, VDE 0682-401:2015
- CAT IV 600 V, CAT III 1000 V
- Length: 260 mm
- Power supply with and without battery .
- Includes 2 x 1.5 V Micro/ AAA/ LR03 battery, measuring tip protection
- Pocket dimensions: 330 x 105 x 65 mm
They are also excellently suited for the latest generation of digital devices. Very great emphasis was placed on excellent performance: High capacity for a long operating time and optimal operational reliability are guaranteed. The hearing aid batteries offer reliable performance and a long shelf life.
Product benefits:
- maximum power for hearing aids
- large adhesive strip for easy removal of the freshness seal
- 4 years shelf life
- common designations: DA10N6, AZA10, 10HPX, PR70, DA10, 10AE, PR70, P10, A10, 10
Technical data:
- Cell size: button cell
- System: Zn/air
- Voltage: 1,45 Volt
- VPE: Blister (6)
- Diameter (net): 5.8 mm
- Net weight: 0,31 g
- Gross weight: 5 g
- IEC designation: PR70 / PR536
It is designed for testing Mode 3 EV supply equipment with a Type 2 plug. The XA version supports three-phase load tests up to 13 A and various fault types, including ""PE open"". Using the Metrel AUTOSEQUENCES, which are predefined in the newer multifunction testers, the complete EVSE charging station can be tested (step by step) both electrically and functionally at the push of a button. With MESM, a professional station-based report can be generated.
Features:
- Banana socket outputs for connection to a three-phase system tester
- Voltage indicator on EVSE output
- Proximity pilot resistor selector switch for simulating the presence of EV cables as well as detecting the rated current
- Selector switch for the Control Pilot resistor to simulate the state of an electric vehicle
- Socket output for connection to a single-phase system tester (phase 1, neutral, PE)
- Type 2 connector for EVSE connection
- 6 mA EV RCD support
- Support for functional tests (only together with MI 3155 XD and MI 3152 EU)
- Support for EVSE AUTO SEQUENCE (only together with MI 3155 XD and MI 3152 EU)
- Creation of MESM reports (The reports can only be printed via the MESM-PC-SW. The MESM licence is included e.g. with the MI 3152 EU multifunction tester
- Load tests with up to 13 A on socket , single-phase or on banana sockets, three-phase
- Fault simulation of diode short circuit, PE-CP short circuit and PE open
- BNC output connector for CP signal monitoring
Application:
- On-site test of EVSE charging station installation
- Initial and regular follow-up testing of private, semi-private and public EVSE charging stations
Safety: EN 61010-1
Functionality: EN 61851-1
Scope of delivery: EVSE instrument adapter XA, small transport bag, operating instructions"
- Can be adjusted to shoe size by clip or rip-tape fastening
- Heel strap for flat outdoor shoes
- Toe strap for high outdoor shoes
- Integrated conductive contact strap
- Extremely durable
- Suitable for left and right shoes
- 1 MOhm safety resistor
Colour: black outside, white inside, grey contact strap
Design: double-laminated rubber sole, conductive contact strip, clip (with D ring)
Material: synthetic rubber, inner/outer made from insulating/conductive rubber, conductive polyester strip with nylon thread
Dimensions: rubber sole 1.8 mm thick, 3.8 cm wide
Conductive contact strap 57 cm (heel strap) or 35 cm (toe strap) long
Application information: Heel/toe straps must be worn on both shoes to reliably prevent charge
avoid
Included with delivery: 1 unit"
- Easy to cut with a knife or scissors
- High attenuation of magnetic fields
- Also shields static magnetic fields, such as those from magnets
- Rot and frost-resistant
- Can be painted over, anti-static
- Folding
- Easy handling and processing, even for non-experts
Technical data:
Shielding: AC/DC magnetic fields
Frequency range: DC to 30 MHz
Damping factor: 5 to 7
Saturation flux density: 0.8 T
Shielding material: Nickel/iron alloy, Mu-metal, isotropic
Colour: Silver
Width: 155 mm
Thickness: 0.1 mm
Length: 1 m
Weight: approx. 1.1 kg/square metre"
Main features: for roll widths up to 25 mm
Core diameter: 76 mm
Dimensions
L x W x H: 210 x 70 x 115 mm
Imprint: ESD labelling
Material group: ABS
Colour(s): black
Surface resistance: 1 x 10^7 ohms IEC 61340-2-3
Dimensions
first measurement (short side) is for the opening side Design: flat bag with side seam or bottom seam (machine-dependent)
Imprint:
product name, ESD symbol, recycling symbol and lot no.
Material group: PE-LD with ESD equipment
Technical note: Caution: Not suitable for battery or battery-backed boards
Not suitable as sole, adjacent packaging for electrostatic discharge sensitive devices (ESDS) outside the EPA. Provides no shielding properties despite conductivity
Colour(s): black, opaque
Recyclable: Yes
Weldable: Yes
Surface resistance: 2 x 10^3 ohms, IEC 61340-2-3
Density: 0.915 - 0.935 g/cm³
Film thickness: 0.08 mm
Durable: permanently volume conductive
Maximum comfort combined with modern technology and energy efficiency: Schneider Electric offers you a wide range of electronic components to enhance your living and business areas technically, economically and individually. Our aim is to offer you the ideal combination of beauty and functionality. From dimmers to slumber switches to radio, blind and time control: With Schneider Electric you can rely on safety, comfort and economy.
- NBR coating on polyester glove
- uperior resistance to abrasion, cutting and tearing
- excellent finger sensitivity and anti-slip
- versatile application
