Kitchen sinks taps units
The Best
DURACELL DURA CR1620 X1 - Lithium button cell, CR1620, 3 V, 16.0 x 2.0 mm, pack of 1
11.76 EUR
Pack of 1 Duracell CR1620 lithium button cellsDuracell's long-lasting and reliable button batteries can be used in a wide range of applications, such as medical devices (blood glucose meters, heart rate monitors), security-related devices (bank card readers) and other electronic devices (watches, clock radios, pedometers, etc.). Duralock Power Preserve technology also keeps the batteries charged for up to 10 years in storage. This means that the desired power is available at all times.
- Packaging: pack of 1
- Voltage: 3 V
- Cell type: CR1620
Compatible with:
280-208, E-CR 1620, DL 1620
Top Pick
CLAGE S10-U - CLAGE hot water storage heater, 10 litres, under-sink model
298.33 EUR
The S 10-U from Clage is a 10-litre storage heater for supplying hot water to one or two points of use. Pressure-resistant, 10-litre small storage heater
The S 10-U is a pressure-resistant under-sink unit. Temperature control approximately 5°C to 80°C. With a capacity of 10 litres, this storage heater also covers increased demand for hot water at a kitchen sink.
Durable and maintenance-free
The S 10-U has antifreeze protection and a corrosion-resistant and therefore maintenance-free copper internal tank with high-quality thermal insulation, which ensures low standby power consumption. Pressure-resistant or pressure-free installation in combination with a safety assembly.
Product features:
- Type: pressure-resistant, installation also possible with a pressure-free fitting
- Output: 2.2 kW
- Connection: with plug (cable length approx. 110 cm)
- Energy efficiency class: A
Excellent
CLAGE CEX - CLAGE instant water heater, 4.8 l/min, pressure-resistant
304.43 EUR
The CEX compact instant water heater from Clage is electronically controlled. This wall-mounted unit supplies hot water to 1 or 2 taps.Water comfort to the exact degree
Temperature adjustment from 20°C to 60°C via button control panel with LED display. Individual fixed values can be set with two program buttons. In the comfort range between 35°C and 43°C, the temperature can be set in 0.5-degree increments.
Small dimensions and easy installation
Thanks to its small dimensions and external 1/2-inch water connections for pressure-resistant or pressure-free installation, the instant compact water heater is easy to install. The device power can be set to 11 kW or 13.5 kW during installation.
Product features:
- Type: pressure-resistant
- Assembly: wall-mounted
- Power: 11 V/13.5 kW
- Connection: permanent connection (400 V, 16 A/20 A)
- Energy efficiency class: A
- Made in Germany
Please note:
A 400-V high-voltage power connection is required for the installation of this appliance. This appliance may only be installed, commissioned and maintained by an electrician! We offer on-site customer service in the event of warranty claims.
Permanent-connection appliances must be installed by the network operator or by a registered specialist company.
Recommended
DURACELL DURA CR1632 X1 - Lithium button cell, CR1632, 3 V, 16.0 x 3.2 mm, pack of 1
14.07 EUR
Pack of 1 Duracell CR1632 lithium button cellsDuracell lithium special batteries are made of high-purity lithium with up to 50% more power (compared to the minimum average duration in standard IEC tests). Thanks to the Duralock Power Preserve technology, they also have a storage guarantee of up to 10 years and are therefore ready for use whenever they are needed. To ensure the safety of children, the batteries are packaged in a tamper-proof double blister, which children cannot open without scissors.
- Packaging: pack of 1
- Voltage: 3 V
- Cell type: CR1632
Compatible with:
CR 1632, BR1632
Featured
FISCHER ELEKTRONIK ICK SMD A 22 SA - Heat sink 22mm 34 K/W black anodised
10.59 EUR
Specially suited for SMD-componentsLow type of construction
Effective heat conduction
Can be directly pasted onto the component
Alternative
FISCHER ELEKTRONIK FK 240 SA 220 H - Heat sink 38.1mm 16 K/W black anodised
14.07 EUR
Narrow design with better thermal resistanceMax. 14.5 mm wide
3 different lengths for varied dissipation power
Less space required than for any other clip-on heat sinks
Simple assembly by means of pushing the heatsink onto the TO 220 housing
Optimal heat transfer due to uniform pressure on the entire supporting surface of the TO 220 housing
Effective heat emission with horizontal and vertical installation
FISCHER ELEKTRONIK FK 242 SA 220 O - Heat sink 15.2mm 26 K/W black anodised
11.24 EUR
Narrow design with better thermal resistanceMax. 14.5 mm wide
3 different lengths for varied dissipation power
Less space required than for any other clip-on heat sinks
Simple assembly by means of pushing the heatsink onto the TO 220 housing
Optimal heat transfer due to uniform pressure on the entire supporting surface of the TO 220 housing
Effective heat emission with horizontal and vertical installation
FISCHER ELEKTRONIK ICK SMD B 7 SA - Heat sink 7mm 47 K/W black anodised
10.59 EUR
Specially suited for SMD-componentsLow type of construction
Effective heat conduction
Can be directly pasted onto the component
FISCHER ELEKTRONIK ICK SMD A 10 SA - Heat sink 10mm 75 K/W black anodised
10.65 EUR
Specially suited for SMD-componentsLow type of construction
Effective heat conduction
Can be directly pasted onto the component
FISCHER ELEKTRONIK SK 598 10 SA - LED heat sink disc Ø 46 x 10 mm
12.01 EUR
Extruded profile D 46 x 10 mm
FISCHER ELEKTRONIK ICK SMD B 10 SA - Heat sink 10mm 35 K/W black anodised
10.94 EUR
Specially suited for SMD-componentsLow type of construction
Effective heat conduction
Can be directly pasted onto the component
FISCHER ELEKTRONIK FK 240 SA 220 O - Heat sink 38.1mm 16 K/W black anodised
12.01 EUR
Narrow design with better thermal resistanceMax. 14.5 mm wide
3 different lengths for varied dissipation power
Less space required than for any other clip-on heat sinks
Simple assembly by means of pushing the heatsink onto the TO 220 housing
Optimal heat transfer due to uniform pressure on the entire supporting surface of the TO 220 housing
Effective heat emission with horizontal and vertical installation
FISCHER ELEKTRONIK ICK SMD B 13 SA - Heat sink 13mm 29 K/W black anodised
10.74 EUR
Specially suited for SMD-componentsLow type of construction
Effective heat conduction
Can be directly pasted onto the component
FISCHER ELEKTRONIK ICK PGA 21X21 - Heat sink, 53.3 mm, aluminum, 7 K/W, PGA
13.57 EUR
Heat sinks without holes made of black matt anodized aluminum
FISCHER ELEKTRONIK SK 598 15 SA - LED heat sink disc Ø 46 x 15 mm
12.43 EUR
Extruded profile D 45 x 15 mm
ALUTRONIC V PR32/38,1-MC - Heat sink with mounting clip, 11K/W
12.01 EUR
Special heat sink made of aluminium profileMC (mounting clip) version for clip mounting of the semi-conductor
Heat sink solderable with tin-plated solder pins
Width: 35 mm
Height: 12.7 mm
Length: 38.1 mm
For semi-conductor housing: TO 202, TO 218, TO 220, TOP 3
Minimal heat resistance: 11 K/W
Semi-conductor mounting method: Clip mounting
Heat sink mounting type: Soldering
Surface: Black anodised
Material: AlMgSi0.5
FISCHER ELEKTRONIK FK 237 SA 220 H - Heat sink 19.1mm 21 K/W black anodised
11.19 EUR
Narrow design with better thermal resistanceMax. 14.5 mm wide
3 different lengths for varied dissipation power
Less space required than for any other clip-on heat sinks
Simple assembly by means of pushing the heatsink onto the TO 220 housing
Optimal heat transfer due to uniform pressure on the entire supporting surface of the TO 220 housing
Effective heat emission with horizontal and vertical installation
FISCHER ELEKTRONIK FK 237 SA 220 VL - Heat sink 19.1mm 21 K/W black anodised
11.24 EUR
Narrow design with better thermal resistanceMax. 14.5 mm wide
3 different lengths for varied dissipation power
Less space required than for any other clip-on heat sinks
Simple assembly by means of pushing the heatsink onto the TO 220 housing
Optimal heat transfer due to uniform pressure on the entire supporting surface of the TO 220 housing
Effective heat emission with horizontal and vertical installation
FISCHER ELEKTRONIK SK 482 50 SA - Extruded heat sink, 50 mm, black anodised, 6.3 K/W, THFU 1-4+6+7
14.45 EUR
Extruded heat sink for snap-in transistor retaining clip35.3 x 35 x 50 mm, for THFU 1-4+6+7, profile-pressed thread
Finish: black anodised
FISCHER ELEKTRONIK V FK 251-10 LFP - Copper heat sink for LF PAK, 15x13x10mm
10.97 EUR
Copper heat sink for LF PAKWith excellent heat conductivity
Ideal for LF PAK SMD components
FISCHER ELEKTRONIK ICK SMD A 5 SA - Heat sink 5mm 123 K/W black anodised
10.59 EUR
Specially suited for SMD-componentsLow type of construction
Effective heat conduction
Can be directly pasted onto the component
FISCHER ELEKTRONIK FK 237 SA 220 O - Heat sink 19.1mm 21 K/W black anodised
11.09 EUR
Narrow design with better thermal resistanceMax. 14.5 mm wide
3 different lengths for varied dissipation power
Less space required than for any other clip-on heat sinks
Simple assembly by means of pushing the heatsink onto the TO 220 housing
Optimal heat transfer due to uniform pressure on the entire supporting surface of the TO 220 housing
Effective heat emission with horizontal and vertical installation
FISCHER ELEKTRONIK ICK 40 B - Heat sink, 19 x 4.8 x 51 mm, for DIL-IC
11.14 EUR
Heat sink for DIL-IC, for gluing onEnclosure: DIL-IC
For housing: 40-pin
Width: 19 mm
Height: 4.8 mm
Base thickness: 1 mm
Length: 51 mm
Thermal resistance, Rth: 15.8 K/W
Finish: black anodised
FISCHER ELEKTRONIK FK25008LFPAKTR - Copper heat sink for D-PAK, 8x15x8 mm
11.29 EUR
Copper heat sink for D-PAK and othersDirect PCB mounting via solderable surface
FISCHER ELEKTRONIK FK24408DPAKTR - Copper heat sink for D-PAK, 8x23x10 mm
11.5 EUR
Copper heat sink for D-PAK and othersDirect PCB mounting via solderable surface
FISCHER ELEKTRONIK FK24413DPAKTR - Copper heat sink for D-PAK, 13x23x10 mm
11.91 EUR
Copper heat sink for D-PAK and othersDirect PCB mounting via solderable surface
FISCHER ELEKTRONIK FK25010LFPAKTR - Copper heat sink for D-PAK, 8x15x10 mm
11.35 EUR
Copper heat sink for D-PAK and othersDirect PCB mounting via solderable surface
FISCHER ELEKTRONIK FK 247 SA 220 - Finger-shaped heat sink, TO-220
10.59 EUR
Bent sheet metal part- Perforated
- Soldering lug for vertical installation
FISCHER ELEKTRONIK FK 223 SA-CB - Heat sink 42mm 6.8 K/W black anodised
11.24 EUR
Heat sink for power semiconductorsMade of black anodized aluminium
Combination drilled holes, fits several types of packages
FISCHER ELEKTRONIK ICK SMD A 13 SA - Heat sink 13mm 63 K/W black anodised
10.75 EUR
Specially suited for SMD-componentsLow type of construction
Effective heat conduction
Can be directly pasted onto the component
FISCHER ELEKTRONIK FK 216 SA CB - Finger-shaped heat sink TO-220/SOT32
10.88 EUR
Bent sheet metal part
FISCHER ELEKTRONIK SK 481 50 SA - Extruded heat sink, 50 mm, black anodised, 5.7 K/W, THFU 1-4+6
13.77 EUR
Extruded heat sink for snap-in transistor retaining clip30 x 45 x 50 mm, for THFU 1-4+6, profile-pressed thread
Finish: black anodised
FISCHER ELEKTRONIK THFU 2 - Transistor retaining clips for TO218, TO220, TO247 etc.
10.25 EUR
Transistor retaining clipsFor transistor types: TO 218/TO 220/TO 247/TO 262/TO 3 P/SOT 199/SOT 429
- Mounting style: snap-in fastening
- Spring force: 60 N
- Material: stainless steel
FISCHER ELEKTRONIK ICK 36 B - Heat sink, 19 x 4.8 x 47 mm, for DIL-IC
11.14 EUR
Heat sink for DIL-IC, for gluing onEnclosure: DIL-IC
For housing: 36-pin
Width: 19 mm
Height: 4.8 mm
Base thickness: 1 mm
Length: 47 mm
Thermal resistance, Rth: 16.5 K/W
Finish: black anodised
FISCHER ELEKTRONIK FK 237 SA 220 V - Heat sink 19.1mm 21 K/W black anodised
11.29 EUR
Narrow design with better thermal resistanceMax. 14.5 mm wide
3 different lengths for varied dissipation power
Less space required than for any other clip-on heat sinks
Simple assembly by means of pushing the heatsink onto the TO 220 housing
Optimal heat transfer due to uniform pressure on the entire supporting surface of the TO 220 housing
Effective heat emission with horizontal and vertical installation