REICHELT IE: Gps accessories maps

The Best
NAVILOCK 61844 - NL-650ERS u-blox 6 GPS Engine Board NAVILOCK 61844 - NL-650ERS u-blox 6 GPS Engine Board 87.42 EUR GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses RS232.

Technical details
  • Connector: WTB serial RS-232, 6 pin, pitch 1.0 mm
  • Chipset u-blox 6 GPS SuperSense®
  • Sensitivity -160 dBm
  • AssistNow offline (14 days almanach)
  • DGPS, WAAS, EGNOS and MSAS support
  • Short TTFF (Time To First Fix) also at low signal level
  • Support NMEA 0183 protocol
  • Internal patchantenna

Package content
  • GPS module
  • CD-ROM

Package
  • Poly bag
Top Pick
TELTONIKA FMB204 - Terminal tracker, GNSS, GSM, Bluetooth, battery, waterproof TELTONIKA FMB204 - Terminal tracker, GNSS, GSM, Bluetooth, battery, waterproof 77.03 EUR FMB204 Waterproof Tracker with High Capacity internal Li-Ion battery

  • 3x Digital Inputs
  • 2x Digital Outputs
  • 1x Analog Inputs
  • 1x 1-wire data
  • 1x 1-wire power
  • 1x Micro USB 2.0
  • 1x SIM slot
  • 128 MB internal Flash memory
  • 1800 mAh Li-Ion battery (6.66 Wh)

Wireless bands
  • GSM
  • GPRS
  • GPS
  • Bluetooth

FMB204 is a SPECIAL waterproof (IP67) tracker with GNSS, GSM and Bluetooth connectivity.
Designed to work longer without external power supply - internal Li-ion battery enables device to operate up to 6 days in power saving mode.
FMB204 is perfectly suitable for motorbike, scooter and water transport tracking, it can also be used in agricultural machinery and trailer monitoring, security or emergency service fleet management.
Device supports various Bluetooth Low Energy sensors, beacons, hands-free headset, firmware and configuration update via Bluetooth.

Use Cases
  • Motorbikes and Scooters
  • Trailers Tracking
  • Public Safety Services
  • Water Transport
  • Delivery Transport
  • Agriculture Transport
Excellent
WAGO 770-103 - WINSTA® MIDI, 3-pin female connector, with strain relief housing WAGO 770-103 - WINSTA® MIDI, 3-pin female connector, with strain relief housing 15.58 EUR WINSTA® MIDI, series 770 for maximum options

3-pin female connector, with strain relief housing. Wired through thanks to 2 conductor terminals per pin. Excellent reliability due to coding, mismating protection and contact protection. CAGE CLAMP®S spring connection for fast and reliable wiring.
Recommended
NAVILOCK 62447 - GNSS GPS receiver u-blox NEO-6P outdoor NAVILOCK 62447 - GNSS GPS receiver u-blox NEO-6P outdoor 216.57 EUR Use this GPS receiver with PPP (Precision Point Positioning) for very precise positioning tasks.
PPP in conjunction with SBAS is used for high-precision applications in taking measurements, maritime and agriculture (precision farming).

Technical data
• Chipset: u-blox NEO-6P
• PPP (Precision Point Positioning)
• Hybrid chipset for GPS/SBAS (WAAS, EGNOS, MSAS)
• Integrated anti-jamming technology
• Integrated A-GPS technology with AssistNow online and AssistNow offline
• Built-in GPS patch antenna
• Reception frequency: GPS L1 1575.42 MHz
• Receiver sensitivity: -160 dBm
• Update rate: 1 Hz
• Positioning accuracy: SBAS + PPP < 1 m
• Auto baud rate up to 115,200 bps (default 38,400 bps)
• Central fastening thread with central cable
• Optional adapter cable to RS232 SUB-D9 or USB
• Cable length: 5.00 m
• Operating temperature: -20 °C ~ 65°C
• Dimensions (LxWxH): 62 mm x 21 mm
• Power supply: 5 V via PS/2 or USB
• Power consumption: 60 mA at 5 V
• Housing: IPX7 protection class

System requirements
• Windows 2000/XP/Vista/7/8/CE, Windows Mobile 4/5/6, Mac, Linux 2.4.x
• MD6 connection cable

Package contents
• GNSS receiver
• Stainless steel mounting hardware
Featured
NAVILOCK 61845 - NL-651EUSB u-blox 6 NAVILOCK 61845 - NL-651EUSB u-blox 6 77.08 EUR GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses USB 2.0.

Technical details
  • Connector: WTB, USB 2.0, 6 pin, pitch 1.0 mm
  • Chipset u-blox 6 GPS SuperSense®
  • Sensitivity -160 dBm
  • AssistNow offline (14 days almanach)
  • DGPS, WAAS, EGNOS and MSAS support
  • Short TTFF (Time To First Fix) also at low signal level
  • Support NMEA 0183 protocol
  • Internal patch antenna
     

Package content
  • GNSS module

Package
  • Poly bag
Alternative
NAVILOCK 62529 - GPS receiver/u-blox 8/serial MD6/roof mounting/5.00 m NAVILOCK 62529 - GPS receiver/u-blox 8/serial MD6/roof mounting/5.00 m 122.61 EUR GNSS Beidou Galileo Glonass GPS NL-8022MP u-blox 8 serial MD6 roof mounting marine 5.00 m Navilock
The MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8022MP GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
FREI AKKU GPS GAR3 - GPS navigation battery for Garmin Dezl, 1250 mAh FREI AKKU GPS GAR3 - GPS navigation battery for Garmin Dezl, 1250 mAh 18.01 EUR GPS navigation battery

Identical in construction to the following battery variants:
GARMIN 361-00051-02, 361-00046-02, 361-00064-02

Replacement battery suitable for:
GARMIN Dezl 560LMT / Dezl 560LT / Dezl 650LM / Nüvi 2460 / Nüvi 2460, Nuvi 3700, Nüvi 3700, Nüvi 3760, Nüvi 3760, Nüvi 3760T, Nüvi 3760T, Nüvi 3790, Nüvi 3790, Nüvi 3790T, Nüvi 3790T

(not an original battery from the manufacturer)

Please note:


Opening your device will void the warranty in most cases. The installation of this device battery is particularly complex and is done at your own risk. We accept no liability for consequential damage to devices and/or batteries.
FREI AKKU GPS GAR10 - GPS navigation battery for Garmin Nüvi, 1500 mAh FREI AKKU GPS GAR10 - GPS navigation battery for Garmin Nüvi, 1500 mAh 17.18 EUR GPS navigation battery

Identical to the following batteries:
Garmin: 010-00455-00, 010-00540-70, 361-00019-02, D25292-0000

Replacement battery suitable for:
GARMIN Nüvi 600 / Nüvi 610 / Nüvi 610T / Nüvi 650 / Nüvi 660 / Nüvi 670 / Nüvi 680

(kein Original-Akku des Herstellers)
FREI AKKU GPS GAR11 - GPS navigation battery for Garmin Nüvi, 1100 mAh FREI AKKU GPS GAR11 - GPS navigation battery for Garmin Nüvi, 1100 mAh 19.56 EUR GPS navigation battery

Identical to the following batteries:
GARMIN 361-00056-00, 361-00056-01

Replacement battery suitable for:
GARMIN Nüvi 30 / Nüvi 40 / Nüvi 40LM / Nüvi 50 / Nüvi 50LM, 010-01211-01, Nüvi 65, Nüvi 65LM, Nüvi 65LM 6''

(replacement battery, non-original)
FREI AKKU GPS TT6 - GPS navigation battery for TomTom One, 800 mAh FREI AKKU GPS TT6 - GPS navigation battery for TomTom One, 800 mAh 16.14 EUR GPS navigation battery

Identical to the following batteries:
TomTom: F650010252, F709070710

Replacement battery suitable for:
TOMTOM 4K00.100 / 4N00.004 / 4N00.004.2 / 4N00.005 / 4N00.006 / 4N00.012 / 4N01.000 / 4N01.001 / 4N01.002 / 4N01.003 / NVT2B225 / One / One 3rd Edition DACH / One Europe / One IQ / One IQ Routes / One Regional / One S4L / One S4L Rider 2nd / One V2 / One V3 / One V5 / One Version 3 / One XL Dach TML / One XL Europe / Rider

(kein Original-Akku des Herstellers)
FREI AKKU GPS TT8 - GPS navigation battery for TomTom 340S, 1100 mAh FREI AKKU GPS TT8 - GPS navigation battery for TomTom 340S, 1100 mAh 18.79 EUR GPS navigation battery

Identical in construction to the following battery variants:
TOMTOM 6027A0090721 / 6027A0093901 / FLB0920012619 / FMB0829021142 / FMEB0939041646 / R2

Spare battery suitable for:
TOMTOM 340S LIVE XL / 4EG0.001.08 / One XL 340 / One XL 4EG0.001.17 / Pro 4000 / XXL / Start 45 / Start 45M / Start 45TM / Start 55 / Start 55M / Start 55TM, Start 52

(no original battery from the manufacturer)

Please note:


In most cases, opening your device will invalidate the warranty. The installation of this device battery is particularly complex and is at your own risk. We accept no liability for consequential damage to devices and/or batteries.
FREI AKKU GPS TT15 - GPS navigation battery for TomTom Start 60, 950 mAh FREI AKKU GPS TT15 - GPS navigation battery for TomTom Start 60, 950 mAh 17.29 EUR GPS navigation battery

Identical to the following batteries:
TOMTOM AHA11111003 / VFA, 6027A0089521, AHA11110005, FMB0932008731, P2, VF65,VF6D, VF6S

Replacement battery suitable for:
TOMTOM Start 60, 1EK0.052.02, 4EK0.001.02, Go 50, Go 500, GO 600, One 140, One 140S, One 140S US

(replacement battery, non-original)
FREI AKKU GPS ME1 - GPS navigation battery for Medion GoPal, 1250 mAh FREI AKKU GPS ME1 - GPS navigation battery for Medion GoPal, 1250 mAh 16.57 EUR GPS navigation battery

Identical to the following batteries:
Clarion: BPLP1200 11-B0001MX
Medion: E3MC07135211
Mitac: 027260EOC, E4MT081202B12

Replacement battery suitable for:
CLARION MAP770 / MAP780
MEDION D95023 / D95085 / GoPal P4410 / GoPal PNA150 / GoPal PNA315 / GoPal PNA315T / GoPal PNA460 / GoPal PNA465 / GoPal PNA470 / GoPal PNA470T / MD95058 / MD95069 / MD95083 / MD95084 / MD95119 / MD95145 / MD95157 / MD95232 / MD95241 / MD95242 / MD95243 / MD95300 / MD95330 / MD95350 / MD95392 / MD95891 / MD95949 / MD96054 / MD96080 / MD96112 / MD96130 / MD96132 / MD96174 / MD96180 / MD96188 / MD96193 / MD96205 / MD96220 / MD96250 / MD96252 / MD96269 / MD96270 / MD96271 / MD96272 / MD96274 / MD96297 / MD96309 / MD96365 / MD96366 / MD96368 / MD96372 / MD96390 / MD96392 / MD96404 / MD96454 / MD96473 / MD96475 / MD96492 / MD96505 / MD96507 / MD96571 / MD9659
MITAC Mio C210 / Mio C220 / Mio C220s / Mio C230 / Mio C250
NAVMAN N60i
PIONEER AVIC-S1

(kein Original-Akku des Herstellers)
FREI AKKU GPS TT5 - GPS navigation battery for TomTom Go1000, 1000 mAh FREI AKKU GPS TT5 - GPS navigation battery for TomTom Go1000, 1000 mAh 18.53 EUR GPS navigation battery

Identical to the following batteries:
TomTom: AHL03711018, VF1C

Replacement battery suitable for:
TOMTOM 4CS0.002.01 / Go 1000 / Go 1000 Live / Go 1005 / Go Live 1000 / Go Live 1000 Regional / Go Live 1005

(kein Original-Akku des Herstellers)
NAVILOCK 62527 - GPS receiver/u-blox 8/serial MD6/roof mounting/5.00 m NAVILOCK 62527 - GPS receiver/u-blox 8/serial MD6/roof mounting/5.00 m 139.1 EUR GNSS Beidou Galileo Glonass GPS NL-8004P u-blox 8 serial MD6 roof mounting 5.00 m Navilock
The MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8004P GNSS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
FREI AKKU 30507 - GPS battery, TomTom VIA 1405, Li-Ion, 950 mAh FREI AKKU 30507 - GPS battery, TomTom VIA 1405, Li-Ion, 950 mAh 16.67 EUR Replacement battery for GPS devices.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
TomTom: VIA 1405, VIA 1405M, VIA 1405T, VIA 1435T, VIA 1435TM, VIA 1505, VIA 1505M, VIA 1505T, VIA 1535T, VIA Z1230

Identical to the following batteries:

TomTom: 6027A0114501, KL1

Please note:

Opening your device voids the warranty. Installing this battery is especially complex and follows at your own risk. We do not assume any liability for damage and failure with devices and/or batteries.
FREI AKKU 30629 - GPS battery, TomTom VIA 120, Li-Ion, 700 mAh FREI AKKU 30629 - GPS battery, TomTom VIA 120, Li-Ion, 700 mAh 16.88 EUR Battery for for TomTom VIA 120.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
TomTom: 4EH51, VIA 120, VIA 125, VIA Live, 4EH44, Start 20, Via Live 120, Via Live 125, Via Live Euro, Via Live Regional

Identical to the following batteries:

TomTom: 6027A0117401, 6027A0117412, KM1
FREI AKKU 30500 - GPS battery, Garmin Nüvi 1200, Li-Ion, 930 mAh FREI AKKU 30500 - GPS battery, Garmin Nüvi 1200, Li-Ion, 930 mAh 19.24 EUR Battery for for Garmin Nüvi 1200.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
Garmin: Nuvi 1200, Nüvi 1200, Nuvi 1205, Nüvi 1205, Nuvi 1205W, Nüvi 1205W, Nuvi 1250, Nüvi 1250, Nuvi 1255W, Nüvi 1255W, Nuvi 1260, Nüvi 1260, Nuvi 1260W, Nüvi 1260W, Drive Assist 50, Drive Assist 50LMT, Drive Assist 51, Drive Assist 51LMT, Nuvi 140T, Nuvi 150T

Identical to the following batteries:

Garmin: 361-00035-01

Gps accessories maps REICHELT IE Best Products

FREI AKKU GPS FALK1 - GPS navigation battery for Falk Flex, 1100 mAh FREI AKKU GPS FALK1 - GPS navigation battery for Falk Flex, 1100 mAh 17.29 EUR GPS navigation battery

Identical to the following batteries:
Falk: BP-400H-11/1200MX

Replacement battery suitable for:
FALK Flex 400

(kein Original-Akku des Herstellers)
FREI AKKU 31155 - GPS battery, Garmin DriveLuxe 50 LMT, Li-Ion, 750 mAh FREI AKKU 31155 - GPS battery, Garmin DriveLuxe 50 LMT, Li-Ion, 750 mAh 19.56 EUR Replacement battery for GPS devices.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
Garmin: DriveLuxe 50 LMT, DriveLuxe 50LMT

Identical to the following batteries:

Garmin: 361-00056-21

Please note:

Opening your device voids the warranty. Installing this battery is especially complex and follows at your own risk. We do not assume any liability for damage and failure with devices and/or batteries.
FREI AKKU 31007 - GPS battery, Garmin Zumo 350LM, Li-Ion, 1800 mAh FREI AKKU 31007 - GPS battery, Garmin Zumo 350LM, Li-Ion, 1800 mAh 19.77 EUR Replacement battery for GPS devices.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
Garmin: 010-01043-01, 020-00218-05, Zumo 350LM, Zumo 390LM

Identical to the following batteries:

Garmin: 361-00059-00

Please note:

Opening your device voids the warranty. Installing this battery is especially complex and follows at your own risk. We do not assume any liability for damage and failure with devices and/or batteries.
FREI AKKU GPS PI1 - GPS navigation battery for Pioneer, 800 mAh FREI AKKU GPS PI1 - GPS navigation battery for Pioneer, 800 mAh 17.29 EUR GPS navigation battery

Identical to the following batteries:
Pioneer: 338937010176

Replacement battery suitable for:
PIONEER AVIC-F320BT / CXE2188 / AVIC-F310BT

(kein Original-Akku des Herstellers)
FREI AKKU 30790 - GPS battery, TomTom Start 40, Li-Ion, 700 mAh FREI AKKU 30790 - GPS battery, TomTom Start 40, Li-Ion, 700 mAh 17.39 EUR Battery for for TomTom Start 40.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
TomTom: START 40 EUROPA

Identical to the following batteries:

TomTom: VF3S
NAVILOCK 62575 - GNSS GPS engine module/u-blox 8/USB NAVILOCK 62575 - GNSS GPS engine module/u-blox 8/USB 79.15 EUR GNSS modules are fully assembled receivers with patch antenna, backup battery etc.. This version uses USB.
Technical data
• Connection: WTB USB
• u-blox 8 UBX-M8030-KT chipset
• Frequencies:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602.5625 ~ 1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline,
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115200 bps
• PPS signal on pin 6
• Update Rate:
single GNSS: 18 Hz (e.g. GPS solo)
multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Sensitivity max. -167 dBm
• LED display for GPS status
• Operating temperature: -40°C ~ 85°C without battery
-20°C ~ 60°C with battery
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Dimensions (LxWxH): approx. 30 x 30 x 7.9 mm
System requirements
• device with internal USB interface
Package contents
• GNSS Engine Module
FREI AKKU 30783 - GPS battery, Falk Neo 450, Li-Ion, 1250 mAh FREI AKKU 30783 - GPS battery, Falk Neo 450, Li-Ion, 1250 mAh 17.86 EUR Battery for for Falk Neo 450.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
Falk: Neo 450, Neo 550

Identical to the following batteries:
NAVILOCK 62528 - GPS receiver/u-blox 8/serial MD6/roof mounting/10.00 m NAVILOCK 62528 - GPS receiver/u-blox 8/serial MD6/roof mounting/10.00 m 135.02 EUR GNSS Beidou Galileo Glonass GPS NL-8044P u-blox 8 serial MD6 roof mounting 10.00 m Navilock
The MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8044P GNSS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 10 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62531 - GPS receiver/u-blox 8/USB/roof mounting/4.50 m NAVILOCK 62531 - GPS receiver/u-blox 8/USB/roof mounting/4.50 m 123.64 EUR GNSS Beidou Galileo Glonass GPS NL-8004U u-blox 8 USB roof mounting 4.50 m Navilock
The USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The NL-8004U GNSS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection: USB 2.0 type A plug
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 4.5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62532 - GPS receiver/u-blox 8/USB/roof mounting/4.50 m NAVILOCK 62532 - GPS receiver/u-blox 8/USB/roof mounting/4.50 m 144.27 EUR GNSS Beidou Galileo Glonass GPS NL-8022MU u-blox 8 USB roof mounting marine 4.50 m Navilock
The USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The NL-8022MU GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection: USB 2.0 type A plug
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 4.5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 61264 - Connection cable, MD6 > USB, for GNSS receiver NAVILOCK 61264 - Connection cable, MD6 > USB, for GNSS receiver 40.86 EUR Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox, Sony, GLONASS and SiRF. In order to connect the GNSS receiver to a USB port you need this specific connecting cable. The USB connector provides power to the GNSS receiver and contains the data channels. For integration into the device features of a notebook or tablet PC you need to install the enclosed
Prolific USB to serial driver. It will provide a virtual serial port on your device.

Technical details
  • For connection to USB port
  • Internal serial to USB bridge (driver enclosed)
  • MD6 Navilock GNSS receiver female jack 6 pin
  • Chipset: Prolific PL-2303 TA
  • cable length 52 cm (connectors included)

System requirements
  • Windows XP/Vista/7/8/10
  • For devices with OTG function and optional OTG adapter: Windows 10

Package content
  • Connection cable for PDA GPS Receiver

Package
  • Zip poly bag
NAVILOCK 62525 - GPS receiver/u-blox 8/serial MD6/1.50 m NAVILOCK 62525 - GPS receiver/u-blox 8/serial MD6/1.50 m 108.04 EUR GNSS Beidou Galileo Glonass GPS NL-8003P u-blox 8 serial MD6 1.50 m Navilock
The MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 1.5 m
• Dimensions: (LxWxH): approx. 65 x 45 x 22 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 12669 - Nut for GNSS antenna, 15.875 mm, 10 pieces NAVILOCK 12669 - Nut for GNSS antenna, 15.875 mm, 10 pieces 66.75 EUR This Nylon nut by Navilock is used to mount a GNSS receiver e.g. on a vehicle roof.

Technical details
  • Inner thread: 15.8750 mm (5/8'' - 11 UNC)
  • Spanner width SW: 23.8125 mm (15/16'')
  • Height: 9.5250 mm (3/8'')
  • Material: Nylon

System requirements
  • Navilock GNSS roofmount receiver

Package content
  • 10 x Nylon nut

Package
  • Zip poly bag
NAVILOCK 61843 - Navilock GPS receiver/u-blox 6/serial NAVILOCK 61843 - Navilock GPS receiver/u-blox 6/serial 92.54 EUR The GPS receiver with the u-blox 6 SuperSence chipset receives WAAS and EGNOS data as well as GPS.
The MD6 universal connector allows optional USB or serial cables to be connected. The NL-604P GPS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.

Technical data
  • u-blox 6 GPS SuperSense® high-performance chip/marine design in white
  • GPS receiver with MD6 Navilock connector (USB or serial cable available as an option)
  • Internal patch antenna
  • Central fastening thread with central cable
  • Frequency: L1, 1575.42 MHz, C/A code: 1023 MHz
  • Processes the signals from up to 50 satellites simultaneously
  • Supports AssistNow offline (14 days of almanac data)
  • Supports AGPS, WAAS, EGNOS and MSAS
  • Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
  • Baud rate: 9600 (configurable up to 115,200)
  • Update rate: up to 5 Hz
  • Max. sensitivity: –162 dBm
  • Waterproof housing (IPX7)
  • Operating temperature range: -20°C to +60°C
  • Cold start in approx. 25 seconds
  • Hot start in approx. 1 second
  • Cable length: 5 m
  • Positional accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
  • Dimensions: 62 mm x 21 mm


System requirements
  • Linux from Kernel 2.6
    Mac
    Windows 98SE/ME/2000/XP/Vista/7/8
    Windows Mobile 2003/5/6
    Android from V2.1
  • MD6 connection cable
NAVILOCK 62526 - GPS receiver/u-blox 8/serial MD6/5.0 m NAVILOCK 62526 - GPS receiver/u-blox 8/serial MD6/5.0 m 133.93 EUR GNSS Beidou Galileo Glonass GPS NL-8003P u-blox 8 serial MD6 5.0 m Navilock
The MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 1.5 m
• Dimensions: (LxWxH): approx. 65 x 45 x 22 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• CD driver
• User manual on CD ROM Packaging• Box
FREI AKKU GPS MI2 - GPS navigation battery for Mitac Mio Moov, 900 mAh FREI AKKU GPS MI2 - GPS navigation battery for Mitac Mio Moov, 900 mAh 16.36 EUR GPS navigation battery

Identical to the following batteries:
Navigon: TOPAZ, TOPAZ PCZF 1045003501

Replacement battery suitable for:
NAVIGON 70 Easy / 70 Plus / 70 Premium

(kein Original-Akku des Herstellers)
NAVILOCK 60650 - GNSS NaviLock NL-203AA NAVILOCK 60650 - GNSS NaviLock NL-203AA 25.4 EUR GNSS GALILEO GPS antenna NL-203AA SMA connector 5 m High Gain Navilock

  • external active additional antenna for GPS receiver
  • internal patch antenna: 40 x 40 x 4 mm
  • Frequency range: 1575.42 MHz +/- 1.02 MHz
  • VSWR: 2.0 typ.
  • Antenna gain: 5 dBi
  • Polarization: RHCP
  • LNA
  • Antenna gain: 30 dB
  • Input voltage: 3.0 ~ 5.0 V
  • VSWR: 1.5 typ.
  • Noise Figure: 1.5 @ 25°C +/- 10 °C
  • Cable attenuation: 5.70 dB
  • SMA connector
  • Cable RG-174, 50 Ohm, 5 m long
  • Dimensions 50.6 x 50.6 x 15.6 mm
  • Magnetic base
  • Current consumption: typ. 10 mA @ 5.0 V
  • IPX-6
FREI AKKU 31099 - GPS battery, TomTom Go 510, Li-Ion, 920 mAh FREI AKKU 31099 - GPS battery, TomTom Go 510, Li-Ion, 920 mAh 17.6 EUR Replacement battery for GPS devices.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
TomTom: Go 510

Identical to the following batteries:

TomTom: AHA11110004, P5

Please note:

Opening your device voids the warranty. Installing this battery is especially complex and follows at your own risk. We do not assume any liability for damage and failure with devices and/or batteries.
FREI AKKU 30794 - GPS battery, TomTom Go 5000, Li-Ion, 1000 mAh FREI AKKU 30794 - GPS battery, TomTom Go 5000, Li-Ion, 1000 mAh 17.29 EUR Battery for for TomTom Go 5000.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
TomTom: Go 5000, Go 6000, 4PL60

Identical to the following batteries:

TomTom: AHA11111008, VFAD, VF6P, LHA11111052
FREI AKKU 30761 - GPS battery, Falk Neo 520, Li-Po, 950 mAh FREI AKKU 30761 - GPS battery, Falk Neo 520, Li-Po, 950 mAh 17.29 EUR Battery for for Falk Neo 520.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
Falk: Neo 520, Neo 520LMU

Identical to the following batteries:

Falk: SR404255
NAVILOCK 60432 - Engine board EM-506 OEM, with SiRF Star IV chipset NAVILOCK 60432 - Engine board EM-506 OEM, with SiRF Star IV chipset 61.58 EUR This is a complete ready to use GPS receiver.

The EM-506 is a OEM Engine Board with SiRF Star IV chipset, integrated patchantenna and PPS pulse per second/LED pin.

Technical details
  • SiRF Star IV high performance GPS Chipset
  • Frequency: L1, 1575.42 MHz
  • Very high sensitivity (Tracking Sensitivity: -163 dBm)
  • Puls per Second/LED PIN (PPS) at 3D SATFIX (1 second
    high voltage, 1 second low voltage)
  • Extremely fast TTFF (Time To First Fix) at low signal level
  • Support UART interface
  • Baud rate: 4800 bps (1200, 2400, 4800, 9600, 19200, 38400)
  • Built-in LNA(with in CHIP)
  • Compact size (30.00 x 30.00 x 10.70 mm) suitable for space-sensitive application
  • Operation temperature: -40°C ~ 85°C
  • Voltage: 4.5 ~ 6.5 V DC
  • Support NMEA 0183 V3.0 (GGA, GSA, GSV, RMC, VTG, GLL, ZDA)
  • Support OSP protocol
  • Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
  • PCB jack: Digi-Key Part No: 455-1806-1-ND
  • Cable plug: Digi-Key Part No: 455-1381-ND

Package content
  • GNSS engine board

Package
  • Poly bag
NAVILOCK 62798 - MD6 GNSS receiver, NL-803P EVA-M8Q, u-blox 8, 5 m NAVILOCK 62798 - MD6 GNSS receiver, NL-803P EVA-M8Q, u-blox 8, 5 m 113.26 EUR The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-803P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.

Technical details
  • Connector: MD6 Navilock plug (USB or serial cable are optional available)
  • Chipset: u-blox 8 EVA-M8Q
  • Frequency:
    GPS: L1, 1575.4200 MHz
    GLONASS: L1, 1602 (k x 0.5625) MHz
    BEIDOU COMPASS: B1, 1561.0980 MHz
    GALILEO: E1, 1575.4200 MHz
    QZSS: L1, 1575.4200 MHz
  • Accepts the signals of up to 72 satellites at the same time
  • Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
  • Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
  • Auto Baud Rate up to 115200 bps
  • PPS signal on pin 6 (LVTTL 3.3 V)
  • Update rate:
    single GNSS: 18 Hz (e.g. GPS solo)
    multi GNSS: 10 Hz (e.g. GPS+GLONASS)
  • Sensibility: max. -164 dBm
  • Protection class: IPX7
  • Operating temperature: -10 °C ~ 50 °C
  • Power supply: 5 V DC
  • Current consumption: max. 45 mA
  • Cold start in ca. 26 seconds
  • Hot start in ca. 1 second
  • Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
  • Cable length: ca. 5 m
  • Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm

System requirements
  • Android 10.0 or above
  • Chrome OS 90.0 or above
  • Linux Kernel 5.8 or above
  • Windows 10/10-64/11
  • MD6 connection cable

Package content
  • MD6 serial receiver
  • Mounting material: stainless steel nut and washer

Package
  • Box