REICHELT IE: Clocks radios weather stations
The Best
- Ideal for timed action games and workouts
- Easy-to-use die timer
- 4 preset countdown times: 10, 20, 30 and 60 sec.
- Set the desired time at the top to set the timer running
- Adjustable optical and acoustic countdown signal
This die timer is the perfect aid for measuring short intervals of time, such as during action and reaction games with a time limit or during athletic workouts, HIIT or circuit training. Very easy to use.
Four countdown times (10, 20, 30 and 60 seconds) are pre-programmed and printed on the top of the die. Simply turn the desired time to the top of the die and the timer will start running. The small display rotates and displays the countdown time. The red LED light pulsates. Once the selected time is reached, the LED light flashes and a beep sounds. To stop the alarm, rotate the timer to the neutral side.
Note: 2x 1.5 V AAA batteries not included in the scope of delivery
Top Pick
- For monitoring CO2 concentration in buildings where people are present, e.g. schools, offices, public facilities.
- High quality NDIR Dual Beam sensor for long term stable measurements.
- Large CO2 display with extended traffic light indication (green/yellow/blue/red)
- Display of room temperature (°C/°F) and humidity
- Storage of highest and lowest values of CO2, temperature and humidity
- Alarm function for CO2 concentration
- High contrast display with 4 brightness levels
- Manual calibration function for CO2 sensor
- Power connection via USB Type-C cable and power supply (included) or a suitable USB power source
- Built-in rechargeable battery with 12-hour runtime (included).
Indoor air quality is becoming increasingly important.
After all, a good indoor climate promotes health and well-being.
It also increases performance. In schools, offices and public facilities, this is particularly important.
Basically, anywhere where many people are present at the same time.
But when is breathing air ''good air'' In enclosed spaces, the CO2 concentration is one of the most important factors.
The higher the level, the worse the air.
Yet CO2 stays under the radar of the human senses.
We can neither see nor smell it. The only perceptible effects are fatigue and dizziness. Or those of a viral disease.
This is because the probability of transmission increases with CO2 exposure: the more exhaled air there is in the room, the greater the risk of contracting the Corona virus, for example, via aerosols.
With the AIRCO2NTROL UP Dual Beam CO2 monitor you have the air quality permanently in view.
The display shows the current CO2 content of the room air.
In addition, the temperature and humidity appear in the lower display area.
With your new air control system you can now ventilate in time and constantly maintain a good indoor climate.
How the CO2 monitoring works with the AIRCO2NTROL UP Dual Beam from TFA?
A high-quality NDIR Dual Beam sensor measures the current CO2 content in ppm (parts per million).
''Dual Beam'' means that with each regular measurement there is always a second control and calibration measurement to ensure a permanently stable measurement.
The exact result is then visualized on the display, as a measured value and as a bar on a circular, graphic display.
A traffic light display additionally visualizes the value.
Green indicates good air. Yellow, blue and red warn of increasingly bad air.
Values up to 600 ppm are considered ideal, by the way.
The sensor of this device has a measuring range from 400 ppm to 5000 ppm.
An audible alarm helps you to monitor.
You can set the upper limit for the alarm signal yourself.
Maximum and minimum values...
Excellent
An additional outdoor sensor for wireless transmission of temperature and humidity data to your dnt RoomLogg PRO wireless room climate control station. Monitor the indoor climate of up to eight rooms and prevent mould and discomfort. Additional sensors can easily be set up via DIP switches on the back of the device.
- Displays the current outdoor temperature, humidity and channel number
- Temperature measurement range: -40 to +60°C/Resolution: 0.1°C/Accuracy: ± 1°C
- Humidity measurement range: 10 - 99%/resolution: 1%/accuracy: ±5%
- Transmitter operating radius: up to approx. 100 m in open areas
- Radio frequency: 868 MHz
- Simple setup via DIP switches (channels 1 to 8) on the back of the device
- Outdoor transmitter can be set down or hung up
- Power supply: 2x AA batteries (not included)
- Integrated DCF77 receiver
- Plastic housing, white
Recommended
The testo ''VAC'' Smart Case protects your instruments and keeps everything organised. The soft foam insert with precisely fitting compartments has a place for each measuring instrument. And thanks to the impact-proof and flexible hard shell, no harm will come to your little helpers even if the case falls to the ground. The ''VAC'' Smart Case is ideal for the safe storage and easy transportation of the testo 805i, testo 410i, testo 510i, testo 405i, testo 605i and testo 905i Smart Probes measuring instruments.
Specifications:
- Compact dimensions: 270 x 190 x 60 mm
- Outside: impact-proof, flexible hard shell with zip fastening
- Inside: protective foam insert with precisely fitting compartments for each measuring instrument
- Practical storage case for the testo 805i, testo 410i, testo 510i, testo 405i, testo 605i and testo 905i Smart Probes (available separately)
Included in delivery:
testo ''VAC'' Smart Case (without measuring instruments), including foam insert.
Featured
• Large display
• Temperature measurement range -25 - +70°C
• Minimum/maximum function with automatic reset
• Weather resistant
• Patented
• Dimensions: 105 x 97 x 23 mm
Supplied with self-adhesive film and battery (1x AAA)
The thermometer is only intended to be used on the outside of a window, and has a fixed set temperature correction of -1°C
Alternative
- Wireless transmission of outdoor temperature via up to 3 transmitters (max. 60 m)
- Indication of indoor temperature and humidity with comfort level
- Weather forecast
- Tendency of atmospheric pressure
- Absolute and relative atmospheric pressure
- Max.-min.-function
- Bar graph indication of atmospheric pressure and history for the last 12 hours
- Radio-controlled clock with date and weekday
- Two alarm times with snooze function
- Sunrise/sunset and moonrise/moonset in 150 European cities
- Moon phase
- Blue backlight
With a glance at the radio weather station HORIZON you are immediately informed about your current indoor climate and the local weather. Sun, clouds or raindrops, an integrated electronic barometer measures the air pressure and based on the changes the weather symbol gives a forecast for the coming weather. The bar graph on the display shows the air pressure curve over the last 12 hours, allowing you to get a more accurate picture of the weather development. The outside temperature is determined by a radio transmitter. Optionally, it is possible to connect two further radio transmitters to the radio weather station HORIZON, e.g. for monitoring the basement rooms. Time and date are updated by the DCF77 signal transmitted by the atomic clock. The device also fulfils all the functions of an alarm clock. Two alarm clocks with snooze function ensure that you get up on time. The blue backlight can be switched on at the touch of a button.
In addition, the station shows the current moon phase and the time of sunrise and sunset.
The outdoor sensor can be sited anywhere within your garden and a further two sensors can be added easily (extra sensors not supplied). It operates by 2x AA batteries (not included) to transmit data and forecasts to the alarm clock/weather station inside via a 433 MHz frequency signal.
Sleek and stylish display unit
The sleek and stylish display unit can be placed anywhere in your home: it can be powered by the included 230 V adapter or by 3x AAA batteries (not included).
Alarm clock and weather information/forecasting
Offering time and date information, an alarm clock with snooze function and details of today’s temperature, humidity and comfort levels alongside a forecast for the weather in the future.
- Operates via 433 MHz frequency signal
- Including time and calendar function
- Doubles as an alarm clock with alarm and snooze
- Measures the humidity
Package contents
- Indoor unit
- Outdoor sensor
- Adapter
- Quick start guide
- Easy-to-use die timer
- 4 preset countdown times: 5, 15, 30 and 60 min.
- Set the desired time at the top to set the timer running
- Display with the time turns with the countdown
- Adjustable optical and acoustic countdown signal
Four countdown times (5, 15, 30 and 60 minutes) are pre-programmed and printed on the top of the die. Simply turn the desired time to the top of the die and the timer will start running. The small display rotates and displays the countdown time. The red LED light pulsates.
When the selected time is reached, the LED light flashes and a beep sounds to remind you to stop your current activity. To stop the alarm, rotate the timer to the neutral side.
The die timer offers many settings to suit the application and your personal preferences: The alarm sound can be loud or quiet, adjusted or turned fully off. The LED light can be switched off as well. If desired, a pre-alarm can sound 10 seconds before the countdown time elapses.
Note: 2x 1.5 V AAA batteries not included in the scope of delivery
With 20 pre-set AM and FM stations available along with a handy snooze button, you can take your pick from news, sports, classical, pop, dance or whatever takes your fancy to wake up to or drift off to sleep with.
For those looking to grab a few minutes more sleep on those difficult to get out of bed mornings, the snooze button lets you do so with confidence.
And for those on a different schedule to their partner, the dual alarm lets you ignore that first wake-up call completely.
The 0.9'' LED display is easy to read even with the bleariest of morning eyes or in the darkest of night.
• Wind speed display in mph, km/h, m/s or knots
Minimum display: 0.2 m/s 5%
Maximum display: 30 m/s 5%
• Wind strength indicator
• Temperature °C/°F
• Wind chill temperature
• LCD display with backlight
• Automatic power supply disconnection
• Water-resistant
• Dimensions: 38 x 17 x 98 mm
• Incl. battery CR 2032
The alarm clock has a built-in Qi-certified wireless charging dock. Simply place a Qi-compatible device on the charging pad to charge it, and you and your phone will wake up on time and full of energy. The wireless charging function is specifically made for safe and fast charging of your device. The charging speed depends on the maximum output power the device supports. It is compatible with the 15-W fast-charging standard. It also has a USB-A output that allows you to charge devices using a USB cable.
With 20 pre-set AM and FM stations available along with a handy snooze button, you can take your pick from news, sports, classical, pop, dance or whatever takes your fancy to wake up to or drift off to sleep with.
For those looking to grab a few minutes more sleep on those difficult to get out of bed mornings, the snooze button lets you do so with confidence.
And for those on a different schedule to their partner, the dual alarm lets you ignore that first wake-up call completely.
The 1.8'' LED display is easy to read even with the bleariest of morning eyes or in the darkest of night. What's more, you can charge your phone as you sleep using this alarm clock.
- Extremely clear XL display
- Radio clock with maximum accuracy
- Written day of the week and full date
- Alarm with snooze function
- Displays external temperature thanks to a transmitter (max. 100 m), and also displays internal temperature
- with automatic time setting
- and adjustment to summer and winter time
- 24 hours display
- Repeat alarm
- alarm on/off switch
- easy to read dial
- backlight with a duration of 5 seconds
- negative LCD display
- Mase: 5,7 x 5,7 x 2 cm
large LCD display, indication of indoor temperature and date, alarm with snooze function, automatic backlight with light sensor, black
- with high precision
- crescendo alarm
- very quiet movement
- well readable dial
- light function
- luminous hands
- case: 5,6 x 5,6 x 2,7 cm
Cable Length 1000 centimeters. Extendible with Mobeye extension.
Elegantly designed VENTUS weather station with large and clear display. Gives you a local weather forecast and weather readings from the patio, garden or balcony. Everything is transferred from your wireless sensors. W200 gives you local readings of indoor/outdoor temperature and humidity, air pressure as well as calender with day, date and time.
- Weather forecast with weather icons.
- Temperature indoor/outdoor.
- Min/max temperature.
- Air pressure with history 12 hours back.
- Humidity indoor/outdoor.
- Min/max humidity.
- Calendar with day and date.
- Radio controlled clock with alarm function.
- Moon phase
- Icons for alarm (time, temperature, frost).
- Comfort indicator.
- Included: Adapter and one wireless outdoor sensor. Up to three wireless sensors can be connected.
- Dimensions weather station: H: 14.7 x W: 19.2 x D: 3.1 cm
- Dimensions display: H: 9.3 x W: 16.7 cm
- Batteries: Main unit 3 x AAA. Sensor 2 x AAA. Not included.
Clocks radios weather stations REICHELT IE Best Products
Powered by your mains supply, the LED display is always easy to read, and the handy snooze function allows you to grab a few extra minutes of sleep on those days when getting straight out of bed just isn't an option.
- Extra-large LCD display
- High-quality quartz movement
- Temperature displayed in °C/°F
- 12/24-hour display
- 2 alarm times with snooze function
- Time zone adjustment
- Built-in light sensor
- White backlight
- Calendar (date, month)
- Colour: black
- Dimensions: 7.7 x 13.5 x 4.6 cm
- Includes batteries
For the control of indoor and outdoor climate, with internal sensor and 3 wireless radio-controlled transmitters (max. 80 m) for monitoring temperature and humidity in up to 4 rooms, maximum and minimum values, trend indicator, comfort level measurement, radio-controlled clock with date
With its handy format, our testo 410-2 paddle-wheel anemometer is extremely practical for quick control measurements on ventilation grilles and in outdoor areas. With the permanently installed impeller (diameter 30 mm), you can already measure low air speeds from 0.4 m/s to 20 m/s.
To check the air conditions, the wind meter is equipped with our long-term stable Testo humidity sensor as well as with an NTC temperature sensor with a measuring range of -10 ... +50 °C. This allows you to reliably measure air temperature and humidity. At the touch of a button, the testo 410-2 displays additional parameters: The dew point and wet bulb temperature as well as the Beaufort wind force and wind chill temperature. The latter is the temperature felt by humans due to wind-induced cooling.
Product advantages:
- fixed impeller with diameter 30 mm
- measures air velocity, air temperature and humidity
- calculates dew point and wet bulb temperature, wind chill and Beaufort wind force
- including time averaging, max/min and hold function
Technical features:
Temperature - NTC
- Measuring range: -10 to +50 °C
- Accuracy: ±0.5 °C
- Resolution: 0.1 °C
- Measuring cycle: 0.5 s
Humidity - Capacitive
- Measuring range: 0 to 100 %rH
- Accuracy: ±2.5 %RH (5 to 95 %RH)
- resolution: 0.1 %RH
- please take into account the additional accuracy specifications for humidity in the operating instructions.
Flow - Impeller
- Measuring range: 0.4 to 20 m/s
- Accuracy: ±(0.2 m/s + 2 % v. Mw.)
- Resolution: 0.1 m/s
General technical data:
- Operating temperature: -10 to +50 °C
- Protection class: IP10
- Battery type: 2 AAA microcells
- Battery life: 60 h (typical without display illumination)
Scope of delivery: testo 410-2 vane anemometer for measuring air velocity, humidity and air temperature, including protective cap, wrist strap, calibration protocol and batteries.
- Outdoor temperature and humidity via transmitter
- Indoor climate with indoor temperature and humidity
- Weather symbol (based on the changes of humidity values)
- Clock with date
- Comfortable sensor touch operation
The LIFE wireless weather station provides you with useful information about house and garden. The clearly laid out display shows you where you are right away: under the time with date, the room climate appears in the coloured house. Outside temperature and humidity are marked with a stylized tree and symbols indicate the current weather conditions.
People spend two thirds of their lifetime at least indoors. Whether we feel comfortable there depends to a large extent on the quality of the indoor air. Excessively damp rooms promote the formation of mould, but too dry air is also harmful to health.
With the LIFE wireless weather station, you can keep an eye on the indoor temperature and humidity and control the indoor climate through targeted heating and ventilation.
The outdoor values are determined via a separate radio transmitter, which is set up outdoors in a protected place. With a range of up to 60 m, they are transmitted directly to the LIFE weather station. Optionally two further transmitters can be connected.
The maximum and minimum values are stored and called up via a button. All keys function with sensor touch operation. It is sufficient to simply touch the sensor to actuate it. The display illumination is also triggered in this way.
The simple and clear design of LIFE fits into any environment, regardless of whether the weather station is suspended or set up.
The testo 635-1 temperature and humidity measuring instrument is ideally equipped for checking humidity, temperature and dew point in living spaces, production, storage and server rooms, as well as in museums and cold stores. Measurements of absolute pressure in the environment and dew point in compressed air can be carried out quickly and efficiently with the testo 635-1.
Through connectable probes, which are optionally available, the measuring instrument records the following values:
- Humidity
- Material humidity
- Pressure dew point in compressed air
- Air temperature
- Surface temperature
- Core temperature
- Absolute pressure
The testo 635-1 temperature and humidity meter has two probe inputs for plug-in probes with cable. In addition, the testo 635-1 can receive measured values from up to three additional temperature or humidity probes via wireless data transmission and show them on the clear display. To transmit measurement data by radio, you need the optional radio module in addition to radio sensors. It is simply plugged into the testo 635-1 and can be retrofitted at any time. The radio signal between the radio sensor and the measuring instrument carries over a distance of up to 20 meters.
In addition, the measuring instrument calculates the dew point distance between the room air and the wall surface. In the event of mold in the home, this gives you an initial indication of whether mold was caused by incorrect ventilation behavior or by moisture penetrating from outside.
Product advantages:
- with optional available probes you can measure humidity, temperature, absolute pressure and dew point in compressed air
- two plug-in probes and 3 wireless probes can be connected
- calculates dew point and dew point distance
- display of min-/max- and average values
Technical features:
Temperature - NTC
- measuring range: -40 to +150 °C
- Accuracy:
- ±0.2 °C (-25 to +74.9 °C)
- ±0.4 °C (-40 to -25.1 °C)
- ±0.4 °C (+75 to +99.9 °C)
- ±0.5 % v. Mw. (remaining measuring range)
- Resolution: 0.1 °C
Temperature - TE type K (NiCr-Ni)
- Measuring range: -200 to +1370 °C
- Accuracy:
- ±0.3 °C (-60 to +60 °C)
- ±(0.2 °C + 0.5 % of Mw.) (remaining measuring range)
- Resolution: 0.1 °C
Humidity - Capacitive
- Measuring range: 0 to +100 %rH
- Accuracy: See probe data<...
large LCD display, indication of indoor temperature and date, alarm with snooze function, automatic backlight with light sensor, black
- Ideal to monitor your indoor climate
- With flexible magnetic holder for hanging or standing
- With self-adhesive foil
The digital thermo-hygrometer from TFA Dostmann is an ideal measuring instrument for monitoring the indoor climate.
You can easily keep an eye on the room temperature and air humidity and regulate it through targeted heating and ventilation.
In this way you create a comfortable and healthy living environment and even save on heating costs.
The simple and compact design of the thermo-hygrometer fits in every living room.
You can use the practical magnetic holder as a stand or easily attach it to many surfaces with the adhesive pad.
- Extremely clear XL display
- Moon phase display
- Sunrise and sunset time
- Written day of the week and full date
- Alarm with snooze function
The CL11 benchtop display unit is an inexpensive multiple parameter meter that simultaneously measures and records CO2, humidity and temperature.
Equipped with the field-tested ROTRONIC HYGROMER® IN-1 humidity sensor, this instrument offers unbeatable value for money.
Using the ROTRONIC software package SW21, it can be easily set to record as required and data can then be downloaded, saved and analyzed.
Features:
- Measures and logs CO2, relative humidity and temperature
- ROTRONIC HYGROMER® IN-1 humidity sensor
- 40,000 data point memory for CO2, humidity and temperature values
- Maximum, minimum and average values displayed
- Adjustable audible and visual CO2 alarm
- Optional external temperature probe
- Includes software for configuration and data download
wall mounting or table standing, 41 (83) x 23 (61) x 128 (135) mm, 52 g, 2x 1,5 V AAA batteries included
- with automatic time setting
- and adjustment to summer and winter time
- Multiband setting (worldwide radio reception)
- 24 hrs. display
- Repeat alarm (5 min.)
- alarm on/off switch
- easy readable dial
- illumination (5 sec.)
- rotating projector
- projects the time on wall or ceiling
- incl. adapter
- 9 x 13 x 4,9 cm
- Starter set for WEATHERHUB OBSERVER platform
- Incl. thermo-hygro transmitter with professional cable sensor
- Cable probe with wide measuring range up to 110°C.
- Ideal for cooling and air-conditioning units or liquids
- Short transmission intervals
The Homematic IP Weather Sensor - basic is part of the Homematic IP smart home system and offers reliable and exact metering of the outside temperature, humidity, wind velocity, brightness and hours of sunshine. The weather data is displayed and evaluated comfortably via the free Homematic IP app. In addition, the weather data can also be applied for triggering of different actions. For example, shutters are raised in case of strong wind or awnings are extended automatically while the sun is shining. In connection with other Homematic IP devices, a wide range of other applications can be realised. Thanks to the independent battery supply as well as the proven and secure wireless technology, the weather sensor can be mounted also without having to lay any cables. The mounting material required as well as the stainless steel mast of approximately 1.6 meters are supplied.
- Collected weather data is displayed and evaluated via the free Homematic IP app
- Multiple applications in connection with other Homematic IP devices - e.g. moving shutters up in case of strong wind or extending awnings during sunshine
- Flexible application in outdoor areas thanks to radio communication and battery operation
- Easy to install with durable stainless steel mast
- Can be used with the Access Point in connection with the Homematic IP app (no recurring costs), the Homematic Central Control Unit CCU2 as well as with various partner solutions
The testo 405i heat-wire anemometer combines the professional measurement of Testo with app-based operation. This means that you benefit from numerous additional functions in your everyday work. With the testo Smart Probes app, you can easily read the measurement values on your smartphone or tablet. This eliminates the laborious task of deciphering the display in hard-to-reach areas. The volume flow can also be measured very easily with the app: After the intuitive input of the channel cross-section, the app calculates this completely automatically.
Specifications:
- For measuring volume flow, air velocity and temperature
- High ease of use thanks to the testo Smart Probes app (e.g. convenient reading of measurement values, measurement data history, logging function)
- Simple configuration of the dimension and geometry of the channel cross-section for determining the volume flow
- Comfortable working in ventilation ducts thanks to telescopic tube extending up to 400 mm
- Wireless transmission of outdoor temperature via up to 3 transmitters (max. 100m)
- Trend arrow
- Indication of indoor temperature
- Max.-min.-function
- Coloured display
With the cheerful and colourful radio-controlled thermometer FUN from TFA Dostmann, you are always informed about the current temperatures.
The outside temperature is transmitted via a wireless radio transmitter on site, the room temperature is measured by an integrated internal sensor.
As an option, two further radio transmitters can be connected to the digital radio thermometer FUN, e.g. to monitor the basement.
Controlling the room temperature is an important factor for a comfortable and healthy living climate and it helps to save energy.
Even a degree of temperature reduction brings up to 6% less on heating costs.
With the outside temperature you receive reliable important information for home, garden, leisure and work.
The measured maximum and minimum temperatures can be called up at the push of a button.
The radio data logger system testo Saveris 2 is the simple, flexible and safe solution for measuring and monitoring the temperature values in your storage, cooling and work rooms. The installation of the system is child's play and can be done either via a browser or with the testo Saveris 2 App.
- automated temperature monitoring with integrated sensor
- alarming when limit values are exceeded by e-mail or (optional) SMS
- Radio data logger system with simple installation and operation
- Temperature data can be retrieved and evaluated at any time via smartphone, tablet or PC
Temperature monitoring with testo Saveris 2
The temperature monitoring system consists of at least one wireless data logger and one cloud access (online data memory). As part of this data logger system, the testo Saveris 2-T1 temperature data logger with integrated NTC temperature sensor stores and transmits all measured temperature values directly to the Testo cloud via your WLAN. Using the alarm function, you can be warned immediately by e-mail or (optionally) SMS if limit values are exceeded.
The Testo cloud packages: Basic (free) and Advanced
The Testo Cloud is the central control element for setting up your testo Saveris 2 system. Here you can configure your wireless data loggers, set limit value alarms and evaluate your measurement data. You can access all measured values and analysis functions at any time and anywhere with an Internet-enabled smartphone, tablet or PC. To have access to the Testo cloud, you must first register at www.saveris.net .
Radio data logger: Advantages and functions
The data logger display shows current measured values, limit violations and the remaining battery life. The standard batteries (AA) have a service life of 24 months and can be changed at any time by the user himself. The internal data memory of the radio data logger is 10000 measured values and the housing is protected according to IP65. testo Saveris 2-T1 is tested by TüV Süd according to EN 12830.
- For the monitoring of CO2 concentration in buildings, where people are present, e.g. schools, offices, public buildings
- CO2 level measurement with 24-hours-graph
- Backlight colour shows CO2 level, alarm or preferred colour
- Indication of time
- Indoor temperature and humidity
- Power supply via micro-USB cable (included)
Who breathes good air is healthier, happier and can do more.
Headaches, dizziness and permanent fatigue are often due to a high concentration of CO2 in the air.
TFA's AIRCO2NTROL COACH CO2 monitor helps you monitor how stale and contaminated the air is in indoor spaces where many people are present such as in schools, offices and public buildings.
Timely and energy-efficient ventilation ensures a healthy indoor climate.
CO2 Indicator
The monitor shows on the display the current CO2 content of the room air, the temperature, humidity and the time.
The display’s illumination colour can be used to quickly evaluate and interpret the current CO2 readings.
Depending on the setting, the illumination directly signals the current air quality in the traffic light colours (green, orange, red).
Alternatively, the red display illumination can be used as an optical signal in the event of an alarm when a certain limit has been exceeded.
As a further variant, you can choose a solid colour from seven shades or switch off the illumination completely.
Air quality monitoring
The three smiley icons serve as a comfort-level zone indicator for the measured values of the last 24 hours.
If the reading is at the level of the happy smiley, the air quality is ideal to good. In addition, the graph clearly shows the CO2 levels development of the last 24 hours.
The power is supplied via a suitable USB power source (PC, laptop).
Temperature humidity sensor for operation with the WeatherHub Gateway 31.4000
Monitor climate data around the house, anywhere and at any time. Ideal for living rooms and bedrooms, cellar, storage, conservatory, greenhouse, server and other air-conditioned rooms or outdoor areas.
Retrieval of the data on your smartphone, even by several users, free app, alarm limits can be set, push messages during an alarm event, very simple installation, up to 50 sensors can be connected to a Gateway
System can be extended with any other transmitters
Measurement range: T: -39.9 - +59.9°C, H: 0 - 99%
Device: Free-standing and hanging, 41 (83) x 35 (61) x 129 (135) mm,
2 x 1.5 V AAA batteries not included, EK-EL
• Display of temperature, maximum and minimum values, dew point, alarm functions
T: -10 - +60°C (+14 °F - 140 °F), H: 10 - 99%
Free-standing and hanging, 98 x 23 (50) x 98 (111) mm, 87 g
2 x 1.5 V AAA batteries included, EK-EL
- Ideal to monitor your indoor climate
- With flexible magnetic holder for hanging or standing
- With self-adhesive foil
The digital thermo-hygrometer from TFA Dostmann is an ideal measuring instrument for monitoring the indoor climate.
You can easily keep an eye on the room temperature and air humidity and regulate it through targeted heating and ventilation.
In this way you create a comfortable and healthy living environment and even save on heating costs.
The simple and compact design of the thermo-hygrometer fits in every living room.
You can use the practical magnetic holder as a stand or easily attach it to many surfaces with the adhesive pad.
- Mood light with color change
- A gentle wake-up with a brighter light
- Sleep timer with natural sounds
- LCD backlight
- Charging function for mobile devices via USB port
THE MOOD LIGHT alarm clock is a multi-talent with many useful features.
Start your morning with a relaxing wake-up. The gradually brighter light and pleasant natural sounds such as forest or sea sounds will gently pull you out of sleep.
Sleep timer allows you to fall asleep in the evening with the same background noise.
The integrated short sleep timer wakes you up in time even after a Power NAP in the afternoon.
The display can be adjusted to four brightness levels or switched off completely.
With the mood light you create a pleasant atmosphere in the living room or bedroom. You can select seven different colors or set a constant color change. The lamp is dimmable and also suitable as night light.
In addition, you will see the current date and the advertised day of the week (selectable in 4 languages) every day.
A special highlight is the built-in charging function for devices with a USB connection, with which you can charge your smartphone overnight.
