Car speakers
The Best

47.88 EUR Pioneer G-Series - Loudspeaker for car
The new and improved G-Series speakers are specially designed for premium and powerful sound and offer excellent value for money. Their rugged, lightweight construction with even more mounting options makes them easy to install in a wide range of vehicle models. And thanks to their improved power handling and high sensitivity, these speakers deliver rich, deep bass and natural, clear highs - even at high volumes.
Upgrade your audio system easily and affordably with the TS-G170C. These 17 cm 2-way component speakers with a rated power handling of 45 watts can handle a maximum of up to 300 watts and have excellent characteristics.
Specification
• 2x car speakers - component, 2-way, passive
• size: 17 cm
• Impedance: 4 Ohm
• frequency response: 36 - 26,000 Hz
• sensitivity: 91 dB
• lowest resonant frequency: 72 Hz
• max. input power: 300 W
• nominal input power: 45 W
• subwoofer material: IMPP composite cone
• tweeter size: 30 mm
• Tweeter material: PEI
• voice coil type: copper
• voice coil type: KAPTON
• magnets: Y35 / Neodymium
Cutout and mounting dimensions
• diameter: Ø 144 mm
• mounting depth: 50 mm
Top Pick

- 2-way coaxial
- Power handling 210 W max/21 W RMS
- Frequency range: 45 - 22,000 Hz
- Sound pressure level: 90 dB/W.m
- 10 cm cone woofer with mica composite cone
- 2.5 cm balanced polyether imide tweeter
- Ferrite magnet (woofer)
- Neodymium magnet (tweeter)
- Hybrid Surround
- Mounting depth: 43.1 mm
Excellent

• Load capacity 300 W max./30 W RMS
• Frequency range: 35 - 22000 Hz
• Sound pressure: 92 dB/Wm
• Cone woofer with mica aramid fibre membrane
• Balanced polyetherimide tweeter
• Ferrite magnet (woofer)
• Neodymium magnet (tweeter)
• Hybrid surround
• Installation depth: 43 mm
Recommended

Technical data:
Rated power: 5 watt
Music power: 8 watt
Rated impedance 8 ohm
Transmission range: (-10 dB) 150 - 20,000 Hz
Mean sound pressure level: 84 dB (1W/1m)
Maximum stroke: 4 mm
Resonant frequency fs: 250 Hz
Magnetic induction: 0.95 Tesla
Magnetic flux: 125 µ Weber
Upper pole plate height: 3 mm
Voice coil diameter: 14 mm
Winding height: 3.7 mm
Baffle opening: 46 mm
Net weight: 0.126 kg
DC resistance Rdc: 6.6 ohm
Mechanical Q factor Qms: 3.89
Electrical Q factor Qes: 1.92
Total Q factor Qts: 1.28
Equivalent volume of compliance Vas: 0.19 l
Effective membrane area Sd 12 cm²
Dynamic moving mass Mms: 0.5 g
Drive factor Bxl 1.6 T m
Voice coil inductivity L: 0.31 mH
Featured

The new and improved G-Series speakers are specially designed for premium and powerful sound and offer excellent value for money. Their rugged, lightweight construction with even more mounting options makes them easy to install in a wide range of vehicle models. And thanks to their improved power handling and high sensitivity, these speakers deliver rich, deep bass and natural, clear highs - even at high volumes.
Upgrade your audio system easily and affordably with the TS-G130C. This 13 cm 2-way component speaker with a rated power handling of 40 watts can be loaded with a maximum of up to 250 watts and has excellent features.
Specification
• 2x Car Speaker - Component, 2-way, passive
• size: 13 cm
• Impedance: 4 Ohm
• frequency response: 37 - 27,000 Hz
• sensitivity: 88 dB
• lowest resonant frequency: 100 Hz
• max. input power: 250 W
• nominal input power: 40 W
• subwoofer material: IMPP composite cone
• tweeter size: 30 mm
• Tweeter material: PEI
• voice coil type: copper
• voice coil type: KAPTON
• magnets: Y35 / Neodymium
Cutout and mounting dimensions
• diameter: Ø 121 mm
• mounting depth: 44 mm
Alternative

13 cm dual cone loudspeaker
Special features
• extra powerful magnetic drive
• 220 W peak power handling
• flush mount
Technical data
• peak power handling 260 W
• Nominal power handling 30 W
• Cone cone material Polypropylene (PP) cone
• Speaker basket Steel
• Loudspeaker surround Fabric
• Sensitivity 89 dB/W/m
• Frequency response 45 Hz ~ 18000 Hz
• Loudspeaker impedance 4 Ohm
• Dimensions (W x H x D) 130 x 130 x 47.6 mm
• Mounting depth 43.5 mm
• Diameter of the mounting hole Ø 112 mm

Easily upgrade your existing in-car audio system. Our subwoofers are the ideal complement to A-Series speakers - just the sound and performance enhancement solution you may have been looking for.
A Series subwoofers provide a significant improvement in bass response, combining high-quality sound, attractive design and advanced technology with carefully selected materials.
Specifications
• Type: Voice Coil Subwoofer
• size: 12'' (30 cm)
• frequency range: 20 - 2600 Hz
• continuous output power (RMS): 500 W
• max power: 1500 W
• impedance: 4 Ohm
• sensitivity: 78 dB

Two-way speaker
160-mm splash-resistant polypropylene membrane
25-mm silk dome tweeter
Specially developed for use outdoors or in damp environments
UV-resistant grille

- Good medium efficiency
- Wideband transmission behaviour in mid-range applications

- 2-way coaxial
- Power handling 300 W max/50 W RMS
- Frequency range: 74 - 25,000 Hz
- Sound pressure level: 89 dB/W.m
- 17 cm cone woofer made of carbon-mica composite material
- 2.5 cm balanced polyether imide tweeter
- Ferrite magnet (woofer/tweeter)
- Neodymium magnet (tweeter)
- Hybrid Surround
- Installation depth: 45 mm

• Load capacity 300 W max./30 W RMS
• Frequency range: 35 - 22000 Hz
• Sound pressure: 92 dB/Wm
• Cone woofer with mica aramid fibre membrane
• Balanced polyetherimide tweeter
• Ferrite magnet (woofer)
• Neodymium magnet (tweeter)
• Hybrid surround
• Installation depth: 43 mm

• Frequency range: 70 - 20000 Hz
• Sound pressure: 87 dB/Wm
• Carbon-mica composite cone woofer
• Ferrite magnet (woofer)
• Hybrid surround
• Installation depth: 45 mm

- Pure silk cone
- Excellent radiation
- Very typical sound pressure curve
- For replacement purposes and hi-fi applications

130 mm 2-way loudspeaker system
The speakers of the ''Performance Standard'' series combine first-class sound characteristics with high-quality workmanship and modern material properties. The newly developed tweeter, for example, enables a particularly differentiated sound and thus ensures a precise feeling of space when reproducing music in the vehicle.
Special features
• Accoustic Sound Harmonizer
• 320 W peak power handling
• 30 mm tweeter
• 50 cm speaker connection cable included
• Loudspeaker cover included
Technical data
• Cone cone material Polypropylene (PP) cone
• Loudspeaker basket Steel
• Speaker surround rubber
• Sensitivity 85 dB/W/m
• Frequency response 80 Hz ~ 25000 Hz
• Loudspeaker impedance 4 Ohm
• Dimensions incl. cover 158 x 158 x 61.4 mm
• Dimensions without cover 131 x 131 x 53 mm
• Mounting depth 46 mm
• Diameter of the mounting hole Ø 112.6 mm

- 2-way coaxial
- Power handling 260 W max/40 W RMS
- Frequency range: 85 - 25,000 Hz
- Sound pressure level: 88 dB/W.m
- 13 cm cone woofer made of carbon-mica composite material
- 2.5 cm balanced polyether imide tweeter
- Ferrite magnet (woofer/tweeter)
- Neodymium magnet (tweeter)
- Hybrid Surround
- Mounting depth: 44.5 mm

- 25-cm woofer (10'')
- Coated diaphragm
- Also for bass supplementation in free-air use
- Protruding lower pole plate for long excursion

16 cm 2-way loudspeaker
Special features
• extra powerful magnetic drive
• 330 W peak power handling
• flush mount
• Loudspeaker grille included
• 25 mm tweeter
Technical data
• Peak power handling 330 W
• Rated power handling 60 W
• Material of cone Polypropylene (PP) cone
• Speaker basket Steel
• Loudspeaker surround Fabric
• Sensitivity 87 dB/W/m
• Frequency response 80 Hz ~ 22000 Hz
• Loudspeaker impedance 4 Ohm
• Dimensions incl. cover 170 x 170 x 72.7 mm
• Dimensions without cover 159.8 x 159.8 x 54.7 mm
• Installation depth 46.7 mm
• Diameter of the mounting hole Ø 126 mm

The upgraded G-Series speakers are specifically designed for premium and powerful sound and offer excellent value for money. Their rugged, lightweight construction with even more mounting options makes them easy to install in a wide range of vehicle models. And thanks to their improved power handling and high sensitivity, these speakers deliver rich, deep bass and natural, clear highs - even at high volumes.
Specification
• 2x car speakers - component, 2-way, passive
• size: 10 cm
• impedance: 4 Ohm
• frequency response: 35 - 27,000 Hz
• sensitivity: 87 dB
• lowest resonant frequency: 113 Hz
• max. input power: 210 W
• nominal input power: 30 W
• subwoofer material: IMPP composite cone
• midrange size: 30 mm
• midrange driver material: PET
• tweeter size: 10 mm
• Tweeter material: PET
• voice coil type: copper
• voice coil type: KAPTON
• magnets: Y35
Cutout and mounting dimensions
• diameter: Ø 106 mm
• mounting depth: 43 mm

Applications:
- Vehicles
- Mobile homes
- Properties:
- Waterproof membrane
- Metal basket
- Coaxial speaker
Equipment/accessories:
Grille, 16 R/177
Grille, 16 RS

- 28-mm silk membrane
- Aluminium voice coil
- Neodymium magnet
- High-quality ABS enclosure with 8-hole screw connection
- Perfect sound with extremely low distortion
- Highest level stability
- Exceptionally long stroke
DT-284 ''The Dome''. This tweeter provides everything you would expect from a top-class tweeter: A sensational linear frequency response, high sound level reserves, deep coupling, compact dimensions and an attractive, unmistakable design!

100 mm 2-way loudspeaker system
The speakers of the ''Performance Standard'' series combine first-class sound characteristics with high-quality workmanship and modern material properties. The newly developed tweeter, for example, enables a particularly differentiated sound and thus ensures a precise feeling of space when reproducing music in the vehicle.
Special features
• Accoustic Sound Harmonizer
• 220 W peak power handling
• 30 mm tweeter
• 50 cm speaker connection cable included
• Loudspeaker cover included
Technical data
• Loudspeaker system Two-way loudspeaker
• Peak power handling 220 W
• Rated power handling 50 W
• Speaker size 100 mm
• Speaker cone special diamond pattern
• Magnet type Ferrite
• Connectors Plug-in connectors
• Installation principle door/hedge installation

170 mm 2-way loudspeaker
The speakers of the ''Performance Standard'' series combine first-class sound characteristics with high-quality workmanship and modern material properties. The newly developed tweeter, for example, enables a particularly differentiated sound and thus ensures a precise feeling of space when playing music in the vehicle.
Special features
• 17cm, 2-way / 2-speaker system
• Polypropylene woofer cone with diamond pattern
• Metal speaker basket with rubber protectors
• 30 mm dome tweeter
• 330 W peak power handling
• Accoustic Sound Harmonizer
• Sound Field Enhancer
• 50 cm speaker connection cable included
• Loudspeaker cover included

- 3-way coaxial
- Power handling 500 W max/70 W RMS
- Frequency range: 58 - 21,000 Hz
- Sound pressure level: 88 dB/W.m
- 15 x 23 cm cone woofer made of carbon-mica composite material
- 6.6 cm polyether imide cone tweeter
- 1.5 cm polyether imide dome tweeter
- Ferrite magnet (woofer)
- Hybrid Surround
- Installation depth: 79 mm

- Outstanding sound characteristics
- Silk soft dome cone with optimised geometry
- Front plate with a specially adapted design
- Very linear reproduction even of lower frequencies
- High efficiency
- Low magnetic dispersion and mechanically very compact due to the application of a high-performance neodymium magnet
- Ideally suited for building smaller speaker systems
- For high-quality standing hi-fi speakersy, e.g. in D'Appolito arrangements
- Very fine and natural sound

- Good all-round loudspeaker
- Foam surround
- Replacement speaker for closed boxes and bass reflex boxes

- 2-way coaxial
- Power handling 220 W max/35 W RMS
- Frequency range: 114 - 23,000 Hz
- Sound pressure level: 88 dB/W.m
- 10 cm cone woofer made of carbon-mica composite material
- 2.5 cm balanced polyether imide tweeter
- Ferrite magnet (woofer/tweeter)
- Neodymium magnet (tweeter)
- Hybrid Surround
- Mounting depth 45.5 mm

10 cm dual cone loudspeaker with speaker grille
Special features
• extra powerful magnetic drive
• 220 W peak power handling
• flush mount
• Loudspeaker grille included
Technical data
• Peak power handling 220 W
• Rated power handling 21 W
• Cone cone material Polypropylene (PP) cone
• Speaker basket Steel
• Loudspeaker surround Fabric
• Sensitivity 88 dB/W/m
• Frequency response 50 Hz ~ 22000 Hz
• Loudspeaker impedance 4 Ohm
• Dimensions incl. cover 134 x 134 x 60 mm
• Dimensions without cover 104 x 104 x 46.2 mm
• Mounting depth 43 mm
• Diameter of the mounting hole Ø 94 mm

With high-range cone and Euro standard basket. Simple to install in vehicles with cut-outs for 10-cm speakers.
- Music power: 30 W
- Rated power: 20 W
- Impedance: 8 Ohm
- Transmission range: 95 - 22,000 Hz
- Mean sound pressure level: 86 dB
- Resonance frequency: 120 Hz
- Installation diameter: 94 mm
- Installation depth: 46 mm
- Basket diameter: 100 mm


- Drilled pole core
- Good frequency response linearity
- For small loudspeakers in the Hi-Fi sector

Balanced frequency response, making the speaker ideal for speech and music playback, such as in vehicles. Low installation depth.
- Music power: 300 W
- Rated power: 15 W
- Impedance: 4 Ohm
- Transmission range: 75 - 16,000 Hz
- Mean sound pressure level: 85 dB
- Resonance frequency: 120 Hz
- Installation size: 87 x 146 mm
- Basket size: 98 x 155 mm
- Colour: black

- For everything from general applications to the public address sector
- Wideband transmission behaviour

10 cm Doppelkonus-Lautsprecher
Besondere Merkmale
• besonders starker Magnetantrieb
• 220 W Spitzenbelastbarkeit
• Flush Mount
Technische Daten
• Nennbelastbarkeit 21 W
• Empfindlichkeit 88 dB/W/m
• Übertragungsbereich 50 Hz ~ 18000 Hz
• Lautsprecherimpedanz 4 Ohm
• Abmessungen (B x H x T) 104 x 104 x 46,2 mm
• Einbautiefe 43 mm
• Durchmesser des Befestigungslochs Ø 94 mm

46.54 EUR Pioneer G-Series - Loudspeaker for car
The new and improved G-Series speakers are specially designed for premium and powerful sound and offer excellent value for money. Their rugged, lightweight construction with even more mounting options makes them easy to install in a wide range of vehicle models. And thanks to their improved power handling and high sensitivity, these speakers deliver rich, deep bass and natural, clear highs - even at high volumes.
Upgrade your audio system easily and affordably with the TS-G1730F. This 17 cm 3-way coaxial speaker with a rated power handling of 40 watts can handle a maximum of up to 300 watts and has outstanding features.
Specification
• 2x car speaker - coaxial, 3-way, passive
• size: 17 cm
• Impedance: 4 Ohm
• Frequency response: 36 - 18,000 Hz
• sensitivity: 90 dB
• lowest resonant frequency: 81 Hz
• max. input power: 300 W
• nominal input power: 40 W
• subwoofer material: IMPP composite cone
• tweeter size: 10 mm
• Tweeter material: PET
• voice coil type: copper
• voice coil type: KAPTON
• magnets: Y35
Cutout and mounting dimensions
• diameter: Ø 144 mm
• mounting depth: 49.7 mm

- Durable soft dome in classic rectangular format
- Ferrofluid
- Good linearity with particularly brilliant characteristics
- Detailed playback

• 350 W max./50 W RMS
• Frequency range: 30 - 25,000 Hz
• Sound pressure: 88 dB/Wm
• 16-cm mica cone woofer
• 52-mm polyether tweeter
• Ferrite magnet (woofer)
• Neodymium magnet (tweeter)
• Hybrid membrane
• Installation depth: 57 mm