Campers caravans
Campers caravans Best Products
- No wobbling when driving thanks to the locking function
- Vibration damping
- Optimal view of larger TVs
Whether it's a caravan, motorhome or campervan, our TV wall bracket with minimal wall clearance allows you to accommodate even larger TVs in a small space. The bracket is suitable for screens with a diagonal of 13 - 43 inches (33 - 109 cm).
The wall bracket can be tilted and swivelled as usual and guarantees the best view of the screen. The precisely designed joints provide good vibration absorption, and the possibility to lock them ensures that the TV is securely held in position and protected while driving.
Thanks to the use of high-quality materials, our bracket can support up to 15 kg, so your TV is always secure.
Technical details:
- Specially designed for motorhomes, caravans etc.
- For 13"" - 43"" (33 - 109 cm) screens
- Max. load 15 kg
- Tilt angle: +45°/-42°
- Lateral swivel: 90°
- For VESA 75 x 75, 100 x 100, 200 x 100, 200 x 200 mm
- Wall clearance: 86 mm
- Includes spirit level
- Includes installation instructions and mounting material
- In cardboard packaging
- The powerful 4G antenna receives signals even where you have no reception with your smartphone
- With the router you create your own hotspot
- With the additional WiFi feature you can connect to the network where it is available at no cost
Internet connection, wherever your journey takes you
The new Maxview Roam, a powerful 4G/Wi-Fi mobile solution designed to deliver uncompromising Internet connectivity across Europe, even in areas with poor reception.
It offers Internet connectivity while standing and while driving, with good connectivity inside and outside the vehicle.
There is no need to align the antenna - just set it up and you're done.
With the Roam family-friendly surfing is possible. In addition to encrypting your personal hotspot, websites can also be blocked for children.
The router is designed to work with any service provider and any SIM card.
So you can use the network that works best for you.
- LTE and Wi-Fi router
Our router is able to receive 3G/4G and WiFi signals, i.e. 3G/4G reception is only switched if necessary. - Suitable for all of Europe
The Roam is designed to provide an Internet connection throughout Europe, wherever your journey takes you. - Connection while stationary and while driving
The Roam provides an Internet connection while standing and while driving, with good connections inside and outside the vehicle. - Built-in router
In a robust aluminium housing and 12V connection with wall bracket, the router was developed especially for vehicles. - Powerful LTE antenna
Our Roam is an omni-directional antenna that has been specially developed for recreational vehicles to provide Internet reception in rural and remote areas. An alignment of the antenna is not necessary, just set it up and you are done. - Easy to install
The roof mounting and the mounting accessories allow an uncomplicated commissioning. - Family-friendly surfing
In addition to encrypting your personal hotspot, websites can also be blocked for children. - Activated for each SIM card
The router is designed to work with any service provider and SIM card. So you can use the network that works best for you.
Standard Installation
In the standard installation, the cables are routed directly underneath the antenna into the vehicle interior.
The strong self-adhesive seal together with the supplied hollow screw prevents water ingress and gives the antenna a firm grip on the vehicle roof.
Antenna
- Type: Omnidirectional antenna MIMO
- Frequency: 698 to 2700MHz<...
- also suitable for caravans
- ensures safe driving with trailer
- never again an overloaded tow bar
- fast control
- just put it under the drawbar
- weighing range 50 -100 Kg
- incl. operating instructions
- Dimensions: 420x 40 x 40 mm (H x W x D)
- Material: polypropylene, metal
Note: Delivery without clutch claw
The LED indicates the respective defective wire colour.
It checks all 7-pin sockets and plugs and includes two adapters for testing all 13-pin sockets and 7-pin plugs.
Both adapters can also be used between a 13-pin towing vehicle and a 7-pin trailer and vice versa.
Power consumption via 9-V block battery (not included).
- Suitable for lashing recess ANHGR 25272
- Hole spacing 62.3 x 83 mm
- Dimensions 125 x 165 mm
- robust construction
- simple installation
This counter plate is specially designed for the ANHGR 25272 lashing recess and ensures an optimum fit and stability. With a hole spacing of 62.3 x 83 mm and dimensions of 125 x 165 mm, it offers sufficient space for secure fastening. The robust construction made of high-quality material ensures a high load-bearing capacity and durability. Thanks to its precise dimensions and easy installation, the counter plate is ideal for use in various mounting scenarios."
The mounting plate for Berker Integro ensures the easy, stable installation of your switches and sockets in motorhomes, caravans or boats. Thanks to its precise workmanship, it ensures secure attachment and seamless integration into your on-board equipment.
Specifications• two test displays - one on the top and one on the bottom are easy to see
• Testable functions: Turn signal left / right, brake light, tail / rear light left / right, rear fog light.
• can be connected directly to the trailer
• check socket on vehicle for functionality (brake of course only when activated)
• connect one end with the 13 pin trailer plug and other end with the 13 pin socket of the vehicle
• tester is easy to use
• faults in the wiring of towing vehicles and trailers are displayed immediately
• wide compatibility - for all types of trailers and vehicles in Europe
• the internal 3.6 V battery (850mAh) can be charged via USB-C
Scope of delivery
• trailer tester
• 3.6V battery (rechargeable)
• user manual
As protection for sensitive parts that need to be fixed, clamped and machined.
- Suitable for vice jaw width 150 mm
- for gluing on, very strong adhesion
- for clamping parts with scratch-sensitive surfaces
- CORK OAK = very elastic, poorly flammable, natural raw material
- Packaging unit 10 pieces
- approx. dimensions 150 x 25 x 3 mm
Specification
• Connector: 1 ?/14 external thread
• Material: ABS
• 4 mounting holes
• Dimensions Mounting plate (LxWxH): ca. 93 x 65 x 8 mm
System requirements
• Free connection surface
Package content
• Antenna base
Package
• Box
As protection for sensitive parts that need to be fixed, clamped and machined.
- Suitable for vice jaw width 100 mm
- for gluing on, very strong adhesion
- for clamping parts with scratch-sensitive surfaces
- CORK OAK = very elastic, poorly flammable, natural raw material
- Packaging unit 10 pieces
- approx. dimensions 100 x 25 x 3 mm
As protection for sensitive parts that need to be fixed, clamped and machined.
- Suitable for vice jaw width 125 mm
- for gluing on, very strong adhesion
- for clamping parts with scratch-sensitive surfaces
- CORK OAK = very elastic, poorly flammable, natural raw material
- Packaging unit 10 pieces
- approx. dimensions 125 x 25 x 3 mm
