REICHELT IE: Access points
The Best

Wall mount for an U6 Pro or AC Pro
The Access Point Pro Arm Mount (UACC Pro AP AM) allows you to mount an U6 Pro, or AC Pro (UAP AC Pro) to the wall instead of the ceiling.
Top Pick

the center of the cap to differentiate it from the PBE-M5-300 Antenna Feed.
Innovative Mechanical Design
Built-in mechanical tilt The mounting bracket conveniently offers 20�° of uptilt and up to 20�° of downtilt
Quick assembly The number of fasteners was reduced to simplify assembly.
Tools are required only when the technician mounts the PowerBeam on the pole
Easy removal The antenna feed can be detached with the push of a button
Corrosion Resistance
Fasteners GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners.
Dish and brackets Made of galvanized steel that is powdercoated for superior corrosion resistance.
Redesigned pole bracket for the 500 and 400 mm dish and fender washers for the 300 mm dish prevent paint from being removed from the metal brackets for improved corrosion resistance.
Improved Noise Immunity
The PowerBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam blocks or spatially filters out noise, so noise
immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Integrated Design
Ubiquiti�fs InnerFeedR technology integrates the radio into the feedhorn
of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.
Providing high performance and innovative mechanical design at a low cost, the PowerBeam is extremely versatile and cost effective to deploy.
airMAX Technology
Included Unlike standard Wi-Fi protocol, Ubiquiti�fs Time Division Multiple Access (TDMA) airMAX protocol
allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.
This time slot method eliminates hidden node collisions and maximizes airtime efficiency. It provides significant performance
improvements in latency, throughput, and scalability compared to all other outdoor systems in its class.
Intelligent QoS
Priority is given to voice/video for seamless streaming
Scalability
High capacity and scalability
Long Distance
Capable of high.speed, carrier-class links
Excellent

1x RJ45 Gigabit Ethernet port (supports IEEE802.3at PoE)
5 GHz: Up to 2402 Mbps
2.4 GHz: Up to 574 Mbps
Empower your business with New-Era Business WiFi 6
WiFi 6 offers faster speeds, lower delays, less interference and increased capacity.
Lightning-fast AX3000 WiFi 6 speeds
New-Era Business WiFi 6, with speeds up to 2976 Mbps, offers more than double the speed of WiFi 5.
Every application feels smoother thanks to dramatically improved WiFi speeds.
Seamless integration with Omada SDN
The Omada Software Defined Networking (SDN) platform integrates network devices, including access points, switches and routers.
It provides 100% centralized cloud management and creates a highly scalable network controlled from a single interface.
Ultra-slim design provides greater portability
Exceptional performance and compact design ensure easy and space-saving WiFi installation.
With its sleek appearance, the EAP653 fits perfectly into any modern office, hotel, classroom or café.
Package contents:
EAP653
Ceiling/wall mounting kits
Installation guide
Recommended

- 802.11ac Wave 2 wireless, up to 1.2 Gbps1, with band steering
- WiFi4EU ready, 2x2 MU-MIMO with beamforming
- Gigabit, PoE-capable LAN port
- Free Nuclias Connect network management software
- Limited Lifetime Warranty & Free Next Business Day Service
WiFi4EU Ready
Meets or exceeds all WiFi4EU requirements. Supports all required IEEE standards. Complies with Hotspot 2.0 (Wi-Fi CERTIFIED Passpoint®).
Wave 2 Wi-Fi with Band Steering
Fast wireless speeds of up to 1200 Mbps*. Automatically steers traffic to the fastest, least congested band.
MU-MIMO & Beamforming
Allows multiple devices to connect simultaneously for improved efficiency. And creates highly-targeted Wi-Fi connections for superior Wi-Fi bandwidth.
Multiple Operational Modes
Use as an access point (AP), wireless client, Wireless Distribution System (WDS) or Wireless Distribution System with AP (WDS+AP).
Strong security, with centralised network management
Use as a standalone AP or manage centrally via free Nuclias Connect software. Supports WPA3****/WPA2/WPA, wireless LAN segmentation and VLAN.
Network Security & Data Privacy
All communications over the system are encrypted. User data never leaves your possession.
Easy-mount setup with PoE
802.3at Power over Ethernet (PoE) enables the device to be deployed with a single cable and where power outlets aren't available.
Reliably faster Wireless AC performance.
Designed for reliable, high-speed wireless connectivity using the latest 802.11ac Wave 2 technology.
It uses maximum wireless signal rates of up to 867 Mbps over the 5 GHz band and 300 Mbps over the 2.4 GHz band*.
- Band steering
Detects dual-band capable devices and automatically connects them to the less congested, faster 5 GHz band. - MU-MIMO
Sends high-bandwidth Wi-Fi to multiple devices at the same time, for greater network data efficiency and a superior Wi-Fi experience for your clients. - Quality of Service
The Wi-Fi Multimedia (WMM) Quality of Service (QoS) feature enables you to create rules for automatically prioritising audio, video, and voice traffic for even greater efficiency. - Load Balancing
Distribute the workload between two or more APs to optimise resource utilisation, throughput and response times.
Versatile deployments.
It can be ceiling-mounted, wall-mounted, or placed on a desk.
Integrated 802.3af Power over Ethernet (PoE) support makes for more convenient indoor deployments using a single Ethernet cable.
Best-in-class security.
Create highly secure wireless networks with Personal and Enterprise versions of WPA,...
Featured

- Simultaneous 450Mbps on 2.4GHz and 867Mbps on 5GHz totals 1350Mbps Wi-Fi speeds
- Free EAP Controller Software lets administrators easily manage hundreds of EAPs
- Support Power over Ethernet(802.3af) for convenient and affordable installation
- Captive portal provides a convenient method for guest authentication
- Band Steering Automatically moves dual band devices onto the wider 5GHz band for faster connections
- 1317Mbps wireless data rate for uninterrupted wireless connection
- Free Controller Software for easy centralized management of hundreds of EAPs
- Power over Ethernet(802.3af) Support for convenient and affordable installation
- Captive portal provides one convenient method of authentication for Wi-Fi guests
- Simple mounting design makes easy to install on any wall or ceiling surface
- Rate limit on per SSID to restrict the bandwidth of each client
- Load balance ensures large numbers of users have smooth network experiences in high density business networks
- Band Steering Automatically moves dual band devices onto the wider 5GHz band for faster connections
- Access Control restricts or only allows the client to access the specified network segment
- Reboot Schedule enables all the APs to reboot automatically at a specified time
- WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN
- Multi-SSID divides multiple wireless network for different users
- Compatible with 802.11 a/b/g/n/ac products
- Adopts Low Smoke Zero Halogen (LSOH) materials for UL2043 compliance
- Multiple operating modes including managed AP and standalone AP satisfy different application conditions
- Qos function gives video and voice streams higher priority to promote smoother performance for video and voice services
Alternative

Ceiling AP, Dual-Chain 2.4GHz, 650MHz CPU, RouterOS L4, 802.3at/af support
- 1x RJ45 Fast Ethernet
- 300 MBit/s (2,4 GHz)
RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP.
Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.
cAP-2nD supports 802.11b/g/n and can be powered by PoE.
It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.
Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network.
No need for a separate controller machine.
Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.
Package Content:
- 1x PoE injector
- 1x Power Adapter
- 1x Screw Kit
- 1x Ceiling Mount
The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase.

The UniFi 7 Pro Wall from Ubiquiti is a powerful, wall-mounted WiFi 7 access point designed specifically for use in modern home and business networks.
It offers seamless installation and outstanding performance in high-traffic environments.
- Wi-Fi 7 with 6 GHz support for ultra-fast speeds
- Six spatial streams for optimized connectivity and higher bandwidth
- Coverage of up to 140 m²
- Support for over 300 simultaneously connected devices
- Power over Ethernet (PoE+) for easy installation without additional power cables
The Ubiquiti UniFi 7 Pro Wall is ideal for environments where high network density and fast connections are required.
It supports the latest Wi-Fi 7 standard, which uses 6 GHz bands to minimize interference and enable higher speeds.
By using six spatial streams, the access point offers impressive network performance that is particularly suitable for smart homes, office environments and buildings with many networked devices.
Thanks to its discreet, wall-mountable design, it blends unobtrusively into any interior and can even be fitted with a paintable flush mount to appear almost invisible.
The Multi-Link Operation (MLO) feature will be provided through a future software update, further enhancing flexibility and performance.
Technical specifications
- Coverage: 140 m²
- Max. Number of devices: 300+
- Supported frequencies: Wi-Fi 7 (2.4 GHz, 5 GHz, 6 GHz)
- Interface: 2.5 GbE uplink port
- Power supply: PoE+ (Power over Ethernet)
- Dimensions: 190 x 142 x 49 mm

Real WiFi 6
The NWA110AX is a true next-generation wireless AP (with WiFi 6) for businesses looking to upgrade to 11ax at the lowest possible cost.
The integrated second-generation WiFi 6 chipset (Qualcomm 802.11ax 2.0) enables the AP to take advantage of the full range of WiFi 6 technologies, including uplink OFDMA and MU-MIMO, not found in earlier versions of 802.11ax products.
Destined for high performance
The NWA110AX has an impressive quad-core processor that ensures consistently smooth transmission to wireless clients.
The NWA110AX is also equipped with premium amplifiers and 4G/5G interface filters to deliver the superior quality of service that makes it one of the best in its class.
Easier upgrade path
The NWA110AX is designed for extremely efficient use of the PoE budget.
It also offers an easy upgrade path for those who want to enjoy full WiFi 6 without having to upgrade existing PoE+ switches.
Management with high flexibility
Because NebulaFlex, Zyxel's scalable, cloud-based management system, is supported, the NWA110AX can be operated via NCC (Nebula Control Center) or simply standalone (without a controller).
It's your choice what best suits your needs.

Build with simplicity and flexibility in mind, the Cisco Business 100 Series Mesh Extenders expand the deployment of traditional wireless networks while reducing deployment costs.
Perfect for use within a small office or back office, they provide connectivity to both local and cloud-based services.
When paired with a Cisco Business access point, the Cisco Business 100 Series Mesh Extenders provide a highly secure and seamless wireless end-user experience.
- 150 Mbps in 2,4 GHz
- 867 Mbps in 5 GHz
- 4x RJ45 10/100/1000 (1x PoE output)
- Maximum number of associated wireless clients: 200 per Wi-Fi radio, for a total of 400 clients per access point
- internal antennas
Easy to install on a desktop
Allows wired access via a single RJ-45 10/100/1000 auto detection port.
This mesh extender come with three local Gigabit Ethernet ports and one uplink Gigabit Ethernet port, allowing for a variety of connections.
MU-MIMO
Multi-user (MU) Multiple-Input Multiple-Output (MU-MIMO) allows simultaneous data transmission to multiple 802.11ac Wave 2-capable clients to improve the client experience.
Mesh technology support
Mix and match Cisco Business mesh extenders or access points to increase WiFi coverage throughout your business.
Two-step setup
Simplified deployment with two-step setup: Scan a QR code via the Cisco Business Mobile app, and power on the device.
No additional setup is required.

Ceiling-mounted WiFi 7 AP with 6 spatial streams and 6 GHz support for interference-free WiFi in demanding, large-scale environments.
- WiFi 7 tri-radio with 6 GHz
- 6 spatial streams
- 140 m² (1,500 ft²) coverage
- 300+ connected devices
- Powered using PoE+
- 2.5 Gigabit Ethernet uplink
Management
U7 Pro is managed with UniFi Network 8.0.26 and later.
Power supply
U7 Pro is powered by PoE+ with a 2.5 GbE uplink.
Its recommended to pair U7 Pro with a UniFi PoE switch that features 2.5 GbE performance and PoE+ output, such as Professional Max and Enterprise PoE switches.
Wi-Fi 6 and Wi-Fi 7
U7 Pro is fully backwards compatible with Wi-Fi 6E and earlier client devices.
A Wi-Fi 6E or Wi-Fi 7 client device is required to utilize the 6 GHz band.
Mounting System
U7 Pro uses the AP Professional Mounting System. It can be installed using the same metal mounting plate as the following AP models:
- U6-Enterprise
- U6-Pro
- U6-LR
- UAP-AC-Pro
- UAP-AC-HD
- UAP-AC-SHD
- UAP-AC-XG
Package Contents:
- 1x Access Point
- 1x Mounting Kit
Note:
Multi-Link Operation (MLO) capability to be provided via software update in February 2024.

Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.850 GHz
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Maximum (conducted) transmit power (limited by local regulatory requirements):
- 2.4GHz band: +18 dBm per chain, +21dBm aggregate (2x2)
- 5GHz band: +18 dBm per chain, +24dBm aggregate (4x4)
- Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
Four integrated dual-band downtilt omni-directional antennas for 4x4 MIMO with maximum antenna gain of 3.6dBi in 2.4GHz and 6.0dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
The Aruba 310 Series access points provide the fastest gigabit data speeds and superb user experience for mobile devices, Internet of Things (IoT) devices, and applications in dense office environments.
These Wave 2 access points deliver multi-user MIMO (MU-MIMO) aware ClientMatch to boost network efficiency and support the growing device density demands on your network.
These APs have an integrated BLE Beacon to remotely manage battery-powered Aruba Beacons. Also for improved network simplicity and security, Dynamic Segmentation automatically enforces real-time device-level access policies on Aruba wired and wireless networks.
Boost network efficiency
With multi-user MIMO (MU-MIMO), you can transmit to multiple Wave 2 clients from an AP, at the same time.
ClientMatch unleashes MU-MIMO
Aruba ClientMatch software groups Wave 2 clients together, enabling MU-MIMO. That means a faster, more efficient network.
Integrated Bluetooth Beacon
310 series APs have an integrated BLE Beacon to simplify management of a large-scale network of battery-powered Aruba Beacons.
Certifications
- CB Scheme Safety, cTUVus
- UL2043 plenum rating
- WLAN Alliance (WFA) certified 802.11a/b/g/n/ac
- Passpoint® (Release 2) with ArubaOS and Instant 8.3+

- 1x RJ45 10/100/1000M uplink
- 2x RJ45 10/100/1000M downlink(including on PoE PSE)
Always in WLAN - no matter where you are
WAC500H with compact design and reliable performance
Not only wireless, but also wired and PoE connections are possible
The Zyxel WAC500H is designed for implementation scenarios that vary from room to room.
It turns an Ethernet wall outlet into not only a WLAN AP for WLAN services, but also a Gigabit switch with PoE that powers a VoIP phone and provides the last mile for network services.
The WAC500H equipped with NebulaFlexTM Pro can be managed through a local web-based management interface, a hardware controller or with a one-year free license with the Nebula Cloud Management Platform.
Many mounting options
With its versatile yet flat mounting design, the AP blends inconspicuously, seamlessly and tastefully into any interior.
For example, it can be mounted directly on a junction box, in a remote location or even simply on a desk.
More than WLAN
The WAC500H not only provides excellent WLAN, but also supports 24/7 wired and PoE connections for mobile point-of-sale (POS) applications for restaurants, bars and cafes.
Work from home like a pro
The WAC500H supports the 802.11ac Wave 2 standards and provides fast and reliable network access with full support for videoconferencing, secure data transfer and seamless connection of multiple devices.
The WAC500H's ''RF First'' and MU-MIMO technologies ensure high-speed network access.
And the two Gigabit Ethernet ports for downlink allow easy connection to a wired printer or convenient use of a VoIP phone.
Highly flexible management
The WAC500H features NebulaFlex Pro technology, which allows the AP to operate in three different modes:
Standalone, with controller, or the Nebula Cloud Networking platform, depending on the needs of each user.
If you need a normal network, use the standalone mode.
If you need a complex network with more advanced features, use an on-site controller.
And Nebula Cloud Networking is designed to handle any situation with high scalability, multiple features and centralized management.

- 1x RJ45 2.5 Gigabit Ethernet port (supports IEEE802.3at PoE)
- 5 GHz up to 4804 Mbps
- 2.4 GHz up to 574 Mbps
High-end business Wi-Fi 6 brings high-performance performance to enterprises
Wi-Fi 6 delivers faster speeds, lower latency, less interference and more capacity.
Seamless integration with Omada SDN
The Omada Software Defined Networking (SDN) platform integrates network devices such as access points, switches and routers to provide 100% Centralized Cloud Management and enable a highly scalable network - all controlled from a single interface.
Automatic optimization of channel selection and transmit power for even better performance
The Omada CBC delivers even better WLAN performance by reducing WLAN interference with automatic adjustment of channel settings and transmit power of neighboring APs on the same network
Easy deployment and higher performance with Omada mesh technology
With mesh technology, Omada APs can wirelessly hand off your networks to each other to save on cable installation or to allow you to expand your network more flexibly and easily, especially in hard-to-wire areas.
Seamless transition with Fast Roaming
WLAN users can stream without interruption even when moving between access points.
Endpoints are automatically connected to the access point with the best signal.
Package contents:
- EAP670
- Power Adapter
- Ceiling/Wall Mounting Kits
- Installation Guide

- Fast 802.11ac dual-band
- Easy To Install
- Compact & robust housing
- Use in areas with many mobile clients
- Supports multiple SSIDs for security management
- Fast Roaming
- Long range & high signal density
- Consistent, smooth mobility
- Power over Ethernet
- Integrated RADIUS server
- Ideal for business applications
- Centralized management by an NMS controller
Powerful solution for modern business
The CAP1750 is a premium WLAN solution, developed for professional use in small and large business, for which excellent network performance is a prerequisite. The product supports the latest IEEE 802.11ac technology for simultaneous dual-band WLAN data transfer speed of up to 1750 Mbps Combining rich features and ease of use, the CAP1750 is the ideal high-performance dual-band solution for demanding day-to-day business transactions. Not least due to the industrial processing and the possibility of simple ceiling mounting, as well as extensive other functions.
The Edimax Pro series offers a wide range of potential applications for companies, schools, universities, hospitals and hotels that require security, Flexibility and speed. Multiple SSIDs can be configured for each department or user group. The integrated radius server enables additional verification for central management of the integrated access points with a scalable AP group architecture. Fast Roaming for seamless transitions between access points, Power over Ethernet Support (PoE) and an intuitive web-based management interface provide deployment flexibility and comprehensive management options for management and controlling departments of companies and their network administrators.
When performance and security are critical to business, you need products that meet those needs. The Edimax Pro Series is specifically designed to support businesses and deliver the connectivity that needs to be reliable every day. With guaranteed security and effectiveness, the CAP1750 offers a very high level of WLAN performance in today's market.
802.11ac Dual-Band: IEEE 802.11ac simultaneous dual-band with 1750 Mbps data transfer speed
Easy installation: Includes mounting kit and T-rails with mounting bracket for the ceiling
Compact & robust housing: Slim design with flame retardant UL94-5VB plastic housing
Use in areas with many mobile clients: Supports up to a hundred users simultaneously, ideal for environments with high levels of mobile data traffic and BOYD (bring your own Device) workplaces
Multiple SSIDs for security management: Supports up to 32 SSIDs (16 x 2.4GHz & 16 x 5GHz), ideal for multiple departments, user groups, customers or guests
Fast roaming: Seamlessly roam between APs...

- 867 Mbps (5 GHz)
- 2x Gigabit Ethernet LAN
- IP66 RATING
- Distance up to 5 km
- PoE
Strong directional antenna
Fast and stable Wi-Fi coverage over distances of up to 5 km
TDMA technology
High speed and constant coverage without interference
IP66 protection class
Water- and dust-proof housing ensures longer product lifetime
Point to point and point to multipoint
Network single or multiple sites over long distances via Wi-Fi
Surge protection up to 8 kV
Your device and network are protected from unexpected surges, such as lightning strikes
High-speed Wi-Fi
Wi-Fi speeds of up to 867 Mbps
Wi-Fi security
128-bit personal and enterprise wireless encryption
PoE-capable
Power over Ethernet requires only one cable and simplifies installation

The Ubiquiti U7 Outdoor is a powerful WiFi 7 access point designed specifically for outdoor use.
It offers robust, weatherproof connectivity and is ideal for large outdoor areas that require a stable and fast Internet connection.
- WiFi 7 support for ultra-fast connectivity
- 4 spatial streams for increased performance and capacity
- Coverage of up to 465 m² with integrated directional super antenna
- Switchable between directional and external omni antennas
- Support for more than 200 simultaneously connected devices
The Ubiquiti U7 Outdoor enables the establishment of stable and powerful networks in large outdoor areas.
With WiFi 7 technology and four spatial streams, it offers high bandwidths and ranges for demanding applications.
Thanks to the integrated, weatherproof design and flexible mounting options, the device can be installed on walls, ceilings or masts and can withstand extreme weather conditions.
The access point can also be easily switched between its integrated super antenna for directional signal and external omni antennas to provide pinpoint or wide-area coverage as required.
Ideal for parks, outdoor events or large construction sites, the U7 Outdoor is an excellent choice for providing reliable Wi-Fi in areas that wired networks struggle to reach.
Technical specifications
- Dimensions: 170 x 208 x 54.5 mm
- Weight: 1.2 kg
- Interfaces: 1 x 2.5 GbE RJ45 port
- Maximum TX power: 26 dBm (5 GHz)
- Maximum data rate: Up to 4.3 Gbps (WiFi 7, 5 GHz)
- Antenna gain: Directional antenna: 12.5 dBi (5 GHz), Omni antenna: 4 dBi (5 GHz)
- Weatherproof: IPX6
- Power consumption: 19 W, operated via PoE+
- Temperature range: -30°C to 60°C

- high performance AC1200 PoE access point
- AC1200: concurrent 867 Mbps WiFi AC + 300 Mbps WiFi N bands
- Access Point, Client, WDS AP, WDS Bridge, WDS Station, and Repeater modes
- included software utility aides WiFi network management
- Gigabit PoE LAN port
- off-white low profile housing blends into the environment
- mounting plate

The Cisco® Business 240AC Access Point delivers an ideal blend of predictable performance in a compact form.
Incorporating 802.11ac Wave 2 features, this platform is ideal for small-to-midsize enterprise deployments.
- 2x RJ45 10/100/1000
- PoE+ powered device
- 600 Mbps in 2,4 GHz
- 1733 Mbps in 5 GHz
- internal antennas
- 1x RJ45 management port
- 1x USB 2.0
Ideal for small and medium-sized networks, the Cisco Business 240AC Access Point delivers industry-leading performance for enterprise-class 4x4 Multi-user Multiple-Input Multiple-Output (MU-MIMO), four spatial stream access points that support the Institute of Electrical and Electronic Engineers (IEEE) 802.11ac Wave 2 standard.
The Cisco Business 240AC Access Point extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support.
802.11ac Wave 1 and 2 capabilities with MU-MIMO technology
The IEEE 802.11ac standard delivers improved experience in typical environments, and more predictable performance for advanced applications such as 4K or 8K video, high-density high-definition collaboration apps, all-wireless offices, and Internet of Things (IoT).
Supporting four spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.
Simplified management
Deploy and configure multiple Cisco Business Wireless access points and mesh extenders easily without a physical controller, using Cisco Business Mobile app.
Optional multisite remote management is available through Cisco FindIT Network Management.
Mesh technology support
Mix and match Cisco Business mesh extenders or access points to increase WiFi coverage throughout your business.
Flexible deployment
Flexible deployment models supporting multiple concurrent use cases required by small businesses, including point of sale systems, surveillance cameras, guest access, and more.
Access points REICHELT IE Best Products

The UniFi AC PRO AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for cost-effective deployment of high performance wireless networks.
Dual-Radio Performance, Gigabit Speeds
The UniFi AC PRO AP delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquiti’s disruptive pricing strategy.
Sleek, Ultra-Compact Design
The UniFi AC PRO AP features a cleaner design in a reduced footprint - half the size compared to the standard UniFi AP.
Scalable Enterprise Wi-Fi Management
The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field.
The WIFI controller solution from UBIQUITI:
Using the free UniFi Controller software, you can take advantage of powerful features such as the central management of large wireless networks and interruption-free transmission from one radio cell to the next (roaming).
For commercial and school environments, there are a range of features that will support you in building up a large network.
In addition to the creation of ''vouchers'', which provide access to the Internet for a limited period of time, there are a number of safety-related features such as the ''walled garden'', a separate guest network, VLAN and detailed analysis options.
Applications and locations:
• Hotels and restaurant
• Office buildings
• Schools
• Public places and institutions
• Mobile devices in warehouses
• Hospitals
• Local authority offices
Once the UniFi server has been installed on a Mac or PC, the UniFi Controller can accessed from any device with a web browser.
Infinite scalability:
Build your wireless network to suit you - size is no issue. Start with one device and expand your network to include thousands more devices!

Incredibly compact, indoor/outdoor AP with versatile mounting options and long-range external antenna support.
- Wi-Fi 5 dual-radio
- 4 spatial streams
- 115 m² (1,250 ft²) coverage with internal antenna
- 200+ connected devices
- Powered using PoE
- GbE uplink
- Versatile wall, ceiling, and pole mounting
- (2) RP-SMA connectors for optional external antennas
- Weatherproof (outdoor exposed)
Package Contents:
- 1x Access Point
- 1x Mounting Kit

- Compatible with Nuclias Connect for centralized network management .
- IEEE 802.11ac Wave 2, up to 1,200 Mbps
- MU-MIMO with beamforming
- Gigabit LAN port, supports 802.3at PoE
- Wall-mounted for installation on Ethernet wall outlets .
- Encryption with WPA/WPA2 Personal/Enterprise
Business WLAN with easy installation and management.
Connect this Nuclias Connect access point to any Ethernet wall jack, and you're ready for fast WLAN with the latest AC Wave 2 standard and remote management.
Fewer cables and powerful management features including guest access make Nuclias Connect the perfect solution for any professional environment.
Manage your enterprise network effortlessly.
The DAP-2622 is compatible with Nuclias Connect, our software-based management platform (with optional hardware controller).
This can either be run as local or hosted on a public cloud service.
Administration tasks are done in no time.
The Nuclias Connect app and software on your PC/server provide easy options for access, automation and network scaling.
Easy network management with Nuclias Connect.
Automate, monitor, manage and scale your network according to your business needs through the centrally managed Nuclias Connect platform.
Complete administrative tasks quickly and smoothly.
Enable administrators to work efficiently and effectively with role-based options for delegating access across your network.
Rapid deployments, updates, and enhancements are possible across multiple sites.
Keep issues to a minimum with the intuitive dashboard.
Free software & app download.
Multiple Gigabit Ethernet ports provide fast connectivity at home or in the office, even for wired devices.
Flexible installation with PoE.
Supports Power-over-Ethernet (802.3at) for easier installation & includes a wall plate design for installation on Ethernet wall outlets
Maximum performance with Wireless AC.
IEEE 802.11ac Wave 2 new generation wireless offers high data throughput of 1,200 Mbps, plus dual-band technology with 2x2 MIMO and band steering
3 LAN ports.
Three LAN ports give you the option to expand your wired network.
In addition, you can connect and power another PoE device, such as a VoIP phone.
Multiple Operating Modes.
Supports multiple AP modes to optimize performance for your network's needs
Reliable performance your business deserves.
The DAP-2622 is designed to support a network you can rely on.
It uses 802.11ac Wave 2, which not only provides fast WLAN speeds, but also improves the efficiency of your network by prioritizing traffic for an all-around smooth and uninterrupted WLAN...

• 2 internal dual-polarised 13 dBi directional antennae for 2*2 MIMO
• Transmission power up to 500 mW for long transmission distances
• Suitable for long-distance transmissions (further than 15 km)
• TP-LINK's Pharos MAXtream TDMA (time division multiple access) technology improves throughput, transmission capacity and latency, ideal for PTMP applications
• ''Pharos Control'' centralized management system
• Operating modes: AP/client/repeater/AP router/AP client router (WISP client)
• Supports passive PoE up to 60 m as well as a remote reboot
Hardware designed to meet the toughest requirements
With chipsets from Qualcomm Atheros, high-gain aerials, a particularly stable, waterproof enclosure and PoE support, the CPE510 was designed specifically for outdoor applications and functions in practically all weather conditions without any problems. It can be used at ambient temperatures from -30°C to +70°C.
Advanced aerial system
The internal, dual-polarised high-gain aerial and a metal reflector increase the total gain and reduce interference.
High transmission power, high receiver sensitivity
The high transmission power (up to 27 dBm/500 mW) and high receiver sensitivity (up to -95 dBm) of the CPE510 make it the ideal product for outdoor WIFI applications over long distances.
Professional outdoor design
The CPE510 was designed to withstand even adverse weather conditions.
Weatherproof design
With its weatherproof outdoor enclosure, the CPE510 works in any weather conditions (sun, rain wind, snow) and at extreme temperatures from -30°C to +70°C.
Double protection against ESD attacks
In addition to the earthing connection, the CPE510 has another mechanism for preventing ESD attacks via the PoE adapter and the Ethernet cable. This comes in the form of 15 kV ESD and 6000 V lightning protection for even more reliable operation.
TP-LINK MAXtream TDMA technology
The CPE510 is equipped with TP-LINK MAXtream TDMA technology. This prevents interferences sources having a greater influence on the WIFI signal as the transmission distance increases. As a result, the useful data throughput is not reduced to below that of conventional outdoor access points when bridging long distances.

• Complies with WIFI standard IEEE 802.11ac and is backwards compatible with WIFI standards 802.11a/b/g/n
• Dual-band for 2.4 GHz and 5 GHz
• Maximum WIFI speed of up to 150 Mbps (2.4 GHz) or 433 Mbps (5 GHz)
• WPS (WIFI Protected Setup) button for easy setup
• With easy setup wizard
• Supports Windows XP/Vista/7/8 and Mac OS X drivers
• Chipset Realtek RTL8811AU
The next-generation WIFI standard
The Edimax EW-7811UTC is the latest generation of WIFI adapters, as it is compatible with the WIFI standard 802.11ac and offers speeds of up to 433 Mbit/s on the 5-GHz frequency — virtually three times as fast as with the WIFI 802.11n. Upgrade your PC or notebook to an unbelievably high-speed 802.11ac WIFI-enabled end device, and enjoy streaming videos and data.
The next-generation 802.11ac WIFI standards are revolutionising Internet connections and surfing the Internet. Super-fast 802.11ac dual-band routers are already on the market, but AC-enabled WIFI end devices have only been designed for the 802.11n technology to date. Upgrade your WIFI-enabled end device to a dual-band-capable 802.11ac with the super-fast USB 2.0 port to experience surfing the Internet at incredible speeds on the previously rarely used 5-GHz frequency.
Dual-band connectivity
Enjoy improved performance and greater flexibility of your WIFI-enabled devices, by using dual-band. The EW-7811UTC supports the 2.4-GHz frequencies for data transfers of up to 150 Mbit/s or the 5-GHz frequency for data transfers of up to 433 Mbit/s. You can use the 2.4-GHz band to surf the Internet and check emails or the rarely used 5-GHz frequency for online gaming and video streaming.
Download and stream content anywhere
Use the EW-7811UTC to download or stream media from YouTube, Netflix or other services, without having to wait for constant buffering, or stream media in your entire network of NAS (Network Attached Storage) at previously unprecedented speeds. Streaming or downloading HD films is faster and more reliable than ever before thanks to the 802.11ac WIFI standard.
Compact and convenient
The mini adapter is light, very small and can be taken anywhere. It is extremely powerful thanks to the 11ac technology, which means it can be integrated perfectly into users' lifestyles today, whilst opening up new worlds of potential online applications. The flat mini adapter goes virtually unnoticed in...

True WiFi 6 AX1800 outdoor AP from Zyxel (802.11ax dual band), WLAN for small businesses with smart mesh, IP55 protection and MU-MIMO, powered by PoE, manageable via Nebula App/Cloud or standalone
- 575 Mbps (2.4 GHz)
- 1200 MBit/s (5 GHz)
- 1x RJ45 10/100/1000
- IEEE802.11 ax/ac/n/g/b/a
- 2x2 external antennas
Are you thinking about upgrading your outdoor WLAN to 11ax (WiFi 6) technology?
The NWA55AXE from Zyxel can help you do just that. The NWA55AXE, with IP55 weather protection, is designed specifically for harsh outdoor environments.
It is the best WiFi 6 outdoor AP for expanding your WLAN outdoors.
- Superfast WiFi 6 with up to 1.8 Gbps (AX1800, Dual 2x2 MU-MIMO)
- Smart mesh forms dynamic WLAN connections to bridge networks in outdoor and inter-building environments
- Designed for harsh outdoor environments with weather protection up to IP55
- The external antenna is detachable. So users can use other antennas that better suit different requirements
- Powered by PoE+, PoE injector included in the box
- With management via Nebula Cloud, you don't have to worry about remembering the IP address or password
True WiFi 6 with full OFDMA support
The NWA55AXE supports both 2.4 GHz and 5 GHz, allowing you to enjoy all the benefits of WiFi 6, such as faster speeds even in congested or high-density environments, extended range on your WLAN, increased capacity for IoT deployments, and more.
Smart Mesh for extended range
Zyxel's Smart Mesh technology not only forms dynamic WLAN links between APs for extended range, but can also bridge WLAN access from one building to another.
There is no doubt that the NWA55AXE is the ideal choice for easily extending your WLAN outdoors or building a cohesive WLAN through outdoor links between buildings.
Easy installation. Easy configuration.
Perfect for small businesses or SOHO users, the NWA55AXE supports both local interface management and Nebula Cloud Networking Management.
The easy setup allows you to quickly configure the AP with just a few clicks.
So you can easily set up the guest and employee network by yourself and enjoy ultra-fast WiFi 6 speeds in no time.
Excellent external detachable antenna design
The NWA55AXE's downward-facing antenna position provides better protection from rain and moisture, while the traditional upward-facing antenna design is prone to water leaks that can damage the AP's interior.
The external antenna is detachable. So users can use other antennas to better meet different requirements.
Management with high flexibility
The NWA55AXE with NebulaFlex gives you management flexibility, allowing you to freely choose between management...

- 1x uplink Gigabit Ethernet port, with POE-in support (802.3af)
- 574MBit/s (2.4 GHz)
- 1201MBit/s (5 GHz)
Aruba Instant On AP22 indoor access points provide affordable enterprise-class 802.11ax WLAN for small business environments with high performance and density.
Enterprise-class features are designed to meet the growing number of mobile, IoT and security requirements.
The compact Aruba Instant On AP22 indoor access points (APs) offer multi-user capabilities and a maximum data rate of 1.2 Gbps to meet HD video streaming and cloud application requirements.
Everything from hardware mounting to easy-to-use management tools for web and mobile applications to enterprise software features are included - at no extra charge or need for external controllers.
- Wi-Fi 6 for high performance and efficiency.
- Supports up to 75 associated clients per wireless connection.
- Support for protected WPA2/WPA3 employee and guest logins with Enhanced Open for per-user guest access
Incredible efficiency with Wi-Fi 6.
Aruba Instant On AP22 indoor access points include an easy-to-use web GUI and templates that enable commissioning and deployment in minutes.
Reduces high cabling costs with full wireless mesh coverage.
Aruba Instant On AP22 indoor access points have built-in wireless mesh capabilities to cost-effectively extend WLAN connectivity without adding cables.
Secure confidential data with WPA2/WPA3 and Enhanced Open.
Aruba Instant On AP22 indoor access points include built-in Wi-Fi Alliance security standard WPA2/WPA3 and Enhanced Open support for protected wireless access.
Creates a tailored access experience for guests.
Aruba Instant On AP22 indoor access points are ideal for single or distributed small business locations such as graphic design companies, cafes, restaurants and other WLAN hotspots.

Cutting-edge wireless Wave 2 AC performance perfect for small to medium business or enterprise environments.
Multi-Mode Makes the Most of your Network Capabilities
In order to achieve optimal network performance, the DAP-2680 has several operational modes tailored to best fit the individual needs of your network.
Access Point, Wireless Client, WDS (Wireless Distribution System), and WDS with Access Point modes allow for flexible, customizable deployment whatever your requirements.
- Access Point
Add wireless access to your existing wired network. - Wireless Client
Add wireless functionality to a device which does not have a Wi-Fi adapter. - WDS
Wirelessly connect two separate networks. - WDS with AP
Wirelessly connect two separate networks while also providing wireless access to both networks.
In a World Where Time is Money, Speed is Essential
Increase employee productivity with access to the data they require at speeds of up to 1750 Mbps while ensuring the same high-level throughput for your guest networks, too with MU MIMO technology’s multiple device connectivity.
An added Gigabit LAN port allows for high-capacity backhaul to the wired network.
Take a Load Off and Let Your AP do the Hard Work
The DAP-2680’s Load Balancing feature spreads the work load between two or more Access Points to get optimal resource utilization, throughput and response time, while Airtime Fairness helps distribute equal amounts of air time to each connected client.
Band Steering auto-connects devices such as smart phones and tablets to the higher-capacity 5 GHz band while allowing devices 2.4 GHz-ready to remain.
The result is a steady, consistent connection for each user - the perfect balancing act.
Industrial Design Redefined
The DAP-2680 is designed with aesthetics in mind.
Its fresh white housing blends well into any indoor space, while its soft, rounded corners ensure an elegant integration wherever it’s placed.
Peak Performance and Discreet Deployment with Power over Ethernet (PoE)
The DAP-2662’s Power over Ethernet function allows for easy installation and a simple, clean setup.
No need to run extra power lines, no added hassle when configuring your hardwiring and no more cable clutter.
Perfect for advanced installations in areas where power outlets are not readily available.
Make Every Second Count with Advanced Quality of Service (QoS)
The DAP-2680 not only delivers reliable wireless performance with combined signal rates of up to 450 Mbps in the 2.4 GHz band and 1300 Mbps in the 5 GHz band but, Wi-Fi Multimedia (WMM™) support enhances your network’s Quality of Service (QoS) by cleverly prioritizing different types of...

TRENDnet's powerful AX1800 Dualband Wi-Fi 6 PoE+ Access Point, model TEW-921DAP, features two simultaneous Wi-Fi frequencies to maximize the network speed of devices using the latest Wi-Fi 6 technology.
The two separate high-speed Wi-Fi 6 frequencies provide speeds of up to 1201Mbps on the 5GHz frequency and 567Mbps on the 2.4GHz frequency.
- Powerful AX1800 PoE+ Wi-Fi 6 Access Point
- OFDMA and MU-MIMO technology boosts performance in a busy environment
- Two simultaneous Wi-Fi frequencies maximize device network speed
- AX1800 dual band: 1201Mbps (5GHz) + 567Mbps (2.4GHz) frequencies
- Access Point, Client Bridge, WDS AP, WDS Bridge, WDS Station and Repeater modes
- Supports up to WPA3 encryption
- 1 Gigabit PoE+ LAN port
- Captive portal for hotspot applications
- Low profile chassis fits into most environments
- Includes wall/ceiling mounting plate and cable protector
Package Contents:
- TEW-921DAP
- Network cable (1.5 m / 5 feet)
- Quick installation guide
- Mounting plate

Aruba Instant On AP15 Indoor Access Points offer a reliable, affordable, and premium-grade Wave 2 802.11ac WLAN experience for medium-density small business environments requiring high performance like boutique hotels and multi-level retail stores. These cost-effective access points are ideal for small businesses, scaling up to 25 access points without additional cost and complexity. Regulatory domain of Rest of World.
Ports
- 1x uplink Gigabit Ethernet port, with POE-in support (802.3af)
Mounting
- The access point ships with a (black) mount clip to attach to suspended ceiling rails, and a (white) mount clip to attach to solid surfaces (wall/ceiling)
Connectivity, standard
- IEEE 802.11ac, 802.11n
Aruba Instant On AP15 Indoor Access Points deliver affordable, premium-grade Wave 2 802.11ac WLAN for medium-density small business environments requiring high performance and bandwidth. Business-grade capabilities are designed to meet the mobile, IoT, and security needs of tech-start-ups and retail stores at an attractive price point.
The compact form factor delivers reliable and affordable multi-user capabilities and an aggregate peak data rate of 2 GBit/s to support high-definition video streaming and cloud application requirements. These Aruba Instant On AP15 Indoor Access Points (AP) also come with a built-in controller to simplify deployment, making it easy to install and manage multiple access points without requiring extensive IT experience, additional hardware, or software applications.
The Aruba Instant On AP15 Indoor APs are designed for small business deployments demanding high-traffic, high-performance network environments like tech-start-ups and co-working spaces.
What's new
- Entry-level wireless access points for small and growing businesses at a cost-sensitive price point
- Comes with an integrated virtual controller for simple deployment of multiple access points
- Support for WPA2/WPA3 employee and guest login with Enhanced Open for per user guest access
Fast Connectivity with 802.11ac Wave 2 Access Points that is Simple to Deploy
Aruba Instant On AP15 Indoor Access Points include an easy to use web GUI and templates so access points are up and running in minutes.
802.11ac Wave 2 features include 4x4:4SS and up to 160 MHz channel bandwidth.
Dual-band wireless (2.4GHz and 5GHz) for combined speeds of up to 2GBit/s support high-bandwidth activities such as video, voice, and conferencing solutions.
Aruba Instant On AP15 Indoor Access Points allow for any change to the primary AP configuration to be automatically pushed to every AP in the same cluster.
A secondary AP automatically takes...

True WiFi 6 AX1800 WLAN AP (802.11ax dual band) from Zyxel, 1.77 Gbit/s with ODFMA and dual 2x2 MU-MIMO antenna, manageable via Nebula App/Cloud or standalone
- 575 MBit/s (2.4 GHz)
- 1200 MBit/s (5 GHz)
- 1x RJ45 10/100/1000
- IEEE 802.11 ax/ac/n/g/b/a
- WPA/WPA2/WPA3 Personal
- 2x2 + 2x2 MIMO antenna
Zyxel's NWA50AX is a true WiFi 6 AP with the right feature set for small businesses and SOHO users looking to upgrade to 11ax (WiFi 6) without having to dig too deep into their pockets.
The NWA50AX supports both 2.4 GHz and 5 GHz, allowing you to enjoy all the benefits of WiFi 6, such as faster speeds even in congested or high-density environments, extended range on your WLAN, increased capacity for IoT deployments, and more.
The NWA50AX with NebulaFlex gives you management flexibility, allowing you to freely choose between management through the local user interface or through our super simple Nebula Cloud management interface.
With it, you'll never have to worry about remembering the IP address or account and password.
- Superfast WiFi 6 with up to 1.8 Gbps (AX1800, Dual 2x2 MU-MIMO)
- Great antenna design and sophisticated thermal design for desktop/wall/ceiling mounting
- Powered via PoE+ or 12V DC, power supply included
- With management via Nebula Cloud, you don't have to worry about remembering the IP address or password
True WiFi 6 with full OFDMA support
The NWA50AX supports both 2.4 GHz and 5 GHz, allowing you to enjoy all the benefits of WiFi 6, such as faster speeds even in congested or high-density environments, extended range on your WLAN, increased capacity for IoT deployments, and more.
WiFi 6 (11ax) solution for small business, SOHO and home offices
Zyxel's NWA50AX is a true WiFi 6 AP with the right feature set for small business owners looking to upgrade to 11ax (WiFi 6) without having to dig too deep into their pockets or complicated configuration.
Easy installation. Simple configuration
No network know-how required - Supporting both local user interface and Nebula Cloud management, you can quickly configure the AP with just a few clicks.
So you can easily set up the guest and employee network yourself and enjoy ultra-fast WiFi 6 speeds in no time.
Excellent thermal design
Unlike SMB APs, which are mostly ceiling-mounted, and consumer APs/routers, which are desk-mounted, Zyxel's NWA50AX can be placed on the ceiling, wall, or desktop.
This has implications for heat dissipation. It uses a front and rear thermal panel design to prevent the AP from getting too hot.
This is to ensure stability and extend the lifespan.
Thus, it is suitable for all placement options to provide optimal performance.

Powerful, ceiling-mounted Wi-Fi 6E access point for seamless multi-band coverage in high-density networks.
- 1x RJ45 2.5 Gigabit Ethernet port (PoE In)
- WiFi 6 support (2.4/5/6 GHz bands)
- 2.4 GHz: 573.5 MBit/s
- 5 GHz: 4800 MBit/s
- 6 GHz: 4800 MBit/s
- 10.2 GBit/s aggregated throughput rate
- up to 600 simultaneous clients
- Power supply via PoE+
Adopt the U6-Enterprise in minutes with your UniFi network appliance and:
- Manage multiple networks centrally from an intuitive user interface
- Enjoy real-time device insights and comprehensive configuration options
- Remotely update device firmware
- Manage network users and guests with ease
- Personalize the design, architecture, and privacy of guest hotspots
- Quickly set up and manage devices on the go with a powerful mobile app

- 1x RJ45 Gigabit Ethernet Port (support 802.3at PoE und Passiv PoE)
- 574 Mbps (2.4 GHz)
- 2402 Mbps (5 GHz)
- IP67
- IEEE 802.11ax/ac/n/g/b/a
Power up Your Business with New-Era Business WiFi 6
WiFi 6 brings faster speeds, lower lag, less interference, and higher capacity.
Lightning-Fast AX3000 WiFi 6 Speeds
New-era business Wi-Fi 6 with speeds up to 2976 Mbps brings more than twice the speed of Wi-Fi 5.
Every application feels more fluid with drastically improved Wi-Fi speeds.
Long-Range Coverage
Professional antennas equipped with high-power amplifiers utilize WiFi 6 technology to provide strong and expansive wireless coverage to various outdoor environments.
Experience the Peak of WiFi 6 with Smart Antennas
TP-Link Smart Antenna technology brings lower interference, longer coverage, and higher performance.
EAP650-Outdoor is equipped with horizontally polarized antennas and vertically polarized antennas, while its intelligent algorithms automatically select the optimal antennas to ensure the peak WiFi experience ideal for outdoor applications.
Always Stay Smooth with Seamless Roaming
Ensures customers enjoy uninterrupted streaming when moving around by switching clients automatically to the access points with the optimal signal.
IP67 Weatherproof Enclosure for Outdoor Environments
EAP650-Outdoor is totally resistant to dust ingress, shock, vibration, and moisture, withstanding the most extreme environments.
Easy Management with the Omada
Follow the configuration instructions on the free Omada app to get set up in minutes.
Omada lets you configure settings, monitor the network status and manage clients, all from the convenience of a phone or tablet.
Package Contents:
- Access Point EAP650-Outdoor
- Passive PoE Adapter
- Power Cord
- Mounting Kits
- Installation Guide

- Mounting standard: 35 mm DIN rail
- Material: low carbon steel
- Weight: 57 g
- Screws included: Philips pan head screw #6-32x3/16, 2 pieces
- Dimensions: 82 mm x 46 mm x 20 mm

The LANCOM IAP-821 is a powerful 11ac WLAN industrial access point. It serves mobile clients with fast wireless LAN either with up to 867 Mbps at 5 GHz or up to 300 Mbps at 2.4 GHz. In combination with an extended temperature range of -20 to +50 °C and a dust-proof housing, the access point is ideal for demanding environments such as logistic surroundings, sheltered outdoor areas or installations at mobile machines.
- Single operation WLAN – optional operation at 5 GHz with up to 867 Mbps with IEEE 802.11ac or in 2.4GHz with up to 300 Mbps in IEEE 802.11n
- Robust full metal housing with protection rating IP-50 for maximum
- reliability in rough environments
- Reliable even at demanding temperatures (-20°C bis +50°C)
- Dynamic WLAN optimization thanks to LANCOM Active Radio Control (ARC)
- Powerful WLAN diagnostics with Spectral Scan
- Professional security features such as IEEE 802.1X
- Zero-touch deployment with a LANCOM WLAN controller or the LANCOM Management Cloud


- 1x RJ45 Gigabit Ethernet port (supports IEEE802.3at PoE)
- 5 GHz up to 2402 Mbps
- 2.4 GHz up to 574 Mbps
High-end business Wi-Fi 6 brings high-performance performance to enterprises
Wi-Fi 6 delivers faster speeds, lower latency, less interference and more capacity.
Seamless integration with Omada SDN
The Omada Software Defined Networking (SDN) platform integrates network devices such as access points, switches and routers to provide 100% centralized cloud management and enable a highly scalable network - all controlled from a single interface.
Automatic optimization of channel selection and transmit power for even better performance
The Omada CBC delivers even better WLAN performance by reducing WLAN interference with automatic adjustment of channel settings and transmit power of neighboring APs on the same network
Ultra-slim design for greater agility
Exceptional performance and compact design ensure easy and space-saving WLAN installation.
With its sleek appearance, the EAP650 fits perfectly into any modern office, hotel, classroom or café.
Package contents:
- EAP650
- Power supply
- Ceiling/wall mounting kits
- Installation guide

- 300 Mbps in 2,4 GHz
- 867 Mbps in 5 GHz
- 1x RJ45 10/100/1000
- PoE+ powered device
- 1x RJ45 management port
- internal antennas
The Cisco Business 140AC Access Point delivers industry-leading wireless performance with support for the latest Wi-Fi standard, IEEE’s 802.11ac Wave 2.
It also meets the growing flexibility requirements of wireless networks by introducing mesh technology - all while delivering a simple user experience.
The 140AC access point extends coverage and capacity to Wi-Fi clients such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support.
MU-MIMO
Multi-User (MU) Multiple-Input Multiple-Output (MU-MIMO) technology allows transmission of data to multiple 802.11ac Wave 2-capable clients simultaneously to improve the client experience.
Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time, typically referred to as Single-User MIMO (SU-MIMO).
802.11ac Wave 2 with 2x2:2 MIMO technology uses two spatial streams when operating in SU-MIMO or MU-MIMO mode, offering 867 Mbps rates for more capacity and reliability than competing access points.
Simplified management
Deploy and configure multiple Cisco Business access points and mesh extenders easily without a physical controller, using Cisco Business Mobile app.
Optional multisite remote management is available through the Cisco FindIT Network Management.
Mesh technology support
Mix and match Cisco Business mesh extenders or access points to increase WiFi coverage throughout your business.
Flexible deployment
Flexible deployment models supporting multiple concurrent use cases required by small businesses, including point of sale systems, surveillance cameras, guest access, and more.

- 300 Mbps in 2,4 GHz
- 867 Mbps in 5 GHz
- 1x RJ45 10/100/1000
- PoE+ powered device
- 1x RJ45 management port
- internal antennas
The Cisco Business 140AC Access Point delivers industry-leading wireless performance with support for the latest Wi-Fi standard, IEEE’s 802.11ac Wave 2.
It also meets the growing flexibility requirements of wireless networks by introducing mesh technology - all while delivering a simple user experience.
The 140AC access point extends coverage and capacity to Wi-Fi clients such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support.
MU-MIMO
Multi-User (MU) Multiple-Input Multiple-Output (MU-MIMO) technology allows transmission of data to multiple 802.11ac Wave 2-capable clients simultaneously to improve the client experience.
Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time, typically referred to as Single-User MIMO (SU-MIMO).
802.11ac Wave 2 with 2x2:2 MIMO technology uses two spatial streams when operating in SU-MIMO or MU-MIMO mode, offering 867 Mbps rates for more capacity and reliability than competing access points.
Simplified management
Deploy and configure multiple Cisco Business access points and mesh extenders easily without a physical controller, using Cisco Business Mobile app.
Optional multisite remote management is available through the Cisco FindIT Network Management.
Mesh technology support
Mix and match Cisco Business mesh extenders or access points to increase WiFi coverage throughout your business.
Flexible deployment
Flexible deployment models supporting multiple concurrent use cases required by small businesses, including point of sale systems, surveillance cameras, guest access, and more.

- Self-configuring cluster feature
- Up to 32 virtual access points may be created from a single access point
- IEEE 802.3af Power over Ethernet (PoE)
- UL2043 certified chassis (plenum-rated SKU)
- Bandsteering for efficient traffic management
- Airtime fairness
- Trusted Wireless Security with WPA/WPA2 Personal, WPA/WPA2 Enterprise, MAC address filtering, Rogue AP detection
Performance without Compromise
The DWL-6610AP is an affordable, Unified Wireless AC1200 Access Point, enabling businesses of all sizes create the fastest wireless network possible.
With a sleek and stylish design, the DWL-6610AP can be discreetly deployed anywhere.
Why You Want It
- Wireless AC 1200
Maximum combined wireless speed of 1200 Mbps. - Broadcast on 32 SSIDs Simultaneously
Supports up to 32 SSIDs, 16 per radio, including station isolation. - Dual Band
Supports both 2.4Ghz and 5Ghz bands simultaneously. - Unified Wireless
Access points can be managed by unified wireless controller.
Smart Design
The DWL-6610AP can be mounted easily onto any wall or ceiling without looking out of place in an office or home.
Enclosed in a plenum-rated UL2043 certified housing, the DWL-6610AP adheres to strict fire codes for placement in air passageways.
Band Steering Technology
With band steering, the DWL-6610AP detects whether or not the wireless client is dual-band capable, and if so, it pushes the client to connect to the less congested 5 Ghz band. It does this by actively blocking the client’s attempts to associate with the 2.4 Ghz network.
Versatility Built as Standard
Whether you intend to use a single Access Point or roll out a large corporate network, the DWL-6610AP coupled with a D-Link Wireless Controller or Unified Switch makes managing your wireless network simple.
Secure and Green Design
The DWL-6610AP has a wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saving power and increasing network security.
Fast Seamless Roaming
Combining the DWL-6610AP with a Unified Wireless Switch or Controller allows you to create a wireless network that enables people to move freely around a building without losing connectivity.

As the central WiFi controller, the LANCOM WLC-30 provides full control over smaller installations with up to 30 access points and WiFi routers, whilst keeping administrator workloads to a minimum.
Zero-touch deployment automatically installs new access points and provisions them with custom configurations.
Smart features, such as roaming optimisation and the selection of bandwidth and WiFi channels, ensure the best possible performance across - even complex wireless networks.
- Central firmware rollout, monitoring & management of between 6 and 30 access points and WiFi routers
- Zero-touch deployment of connected WiFi devices
- Optimised roaming behaviour of WiFi clients thanks to IEEE 802.11r and OKC
- Extensive VLAN, RADIUS and IEEE 802.1X/EAP functions
- Highest operational reliability without a single point of failure
- Dynamic WiFi optimisation thanks to LANCOM Active Radio Control (ARC) support
- Integrated Public Spot Option

- 300 Mbps 2.4 GHz
- 867 Mbps 5 GHz
- 2x RJ45 Gigabit Ethernet LAN
Long-lasting wireless connectivity for enterprises
Designed specifically for use in harsh environments, the DIS-2650AP offers a wide operating temperature range and surge/ESD protection.
The rugged metal chassis allows DIN or wall mounting - ideal for industrial installations.
Manage your enterprise network with ease
The DIS-2650AP can operate either as a standalone device or together with Nuclias Connect, our software-based management platform (with optional hardware controller).
This can either be operated locally or hosted on a public cloud service.
Administration tasks are done in no time.
The Nuclias Connect app and software on your PC/server provide easy options for access, automation and network scaling.
Easy network management with Nuclias Connect
Automate, monitor, manage and scale your network to meet your business needs through the centrally managed Nuclias Connect platform.
Rugged design for harsh environments
Wide operating temperature range with integrated surge protection up to 2 kV and ESD protection up to 15 kV
Flexible DIN or wall mounting
Can be DIN rail or wall mounted for more flexibility in diverse work environments
Flexible power supply
Power supply via Power over Ethernet (802.3at PoE) or redundant dual DC input
Easy expansion
Free Nuclias Connect software controller allows you to expand the network by up to 1,000 access points2
Reliable, secure performance
Fast performance with dual-band, MIMO technology, intelligent user management with band steering and airtime fairness, and Wi-Fi encryption with WPA2
Smooth administration
Make it easy for administrators to work efficiently, even across multiple sites. Rapid deployment, configuration, upgrade, and expansion
Free software and app download
Quickly deploy, manage, and monitor APs - locally with our free network management software or remotely with the Nuclias Connect app.